Author
|
Topic: How to swich AOD tranny wiring harness to a 5-speed
|
phat50
¯
Member # 1998
|
posted
How do i change the wireing for the automatic tranny so i can put in a 5-speed? [ April 08, 2007, 08:28 PM: Message edited by: phat50 ]
-------------------- New toy coming soon!
Posts: 2860 | From: Richmond / Valley jo/ Petaluma | Registered: Oct 2002
| :
|
|
phat50
¯
Member # 1998
|
posted
ttt
-------------------- New toy coming soon!
Posts: 2860 | From: Richmond / Valley jo/ Petaluma | Registered: Oct 2002
| :
|
|
Blind
2.3L CAFords OG
Member # 3052
|
posted
personally I installed a 5spd tranny harness, it plugs in at the drivers kick panel and goes to the tranny through a rubber access plug on the trans tunnel, took less than 5 mins to swap the entire harness.
-------------------- 89 LX Notchback ex 4cyl, 14psi 02 Harley F150, 15psi
Posts: 8521 | From: Fairfield | Registered: Jul 2003
| :
|
|
89Saleen310
¯
Member # 5397
|
posted
yeah i just finsished computers and then left the nuetral safety switch bypass on so i didn't have to use it and pluged the reverse light switch in. So far everything works just find i used my stock aod computer for awhile but didn't like it so i put a 5pd computer in it and havent had any problems yet.
-------------------- 89 Saleen #310 64 1/2 coupe 73 mach 1 73 vert 66 vert 65 vert 67 coupe 67 coupe 66 coupe
Posts: 1128 | From: Oakland Hills (montclair) | Registered: Feb 2005
| :
|
|
phat50
¯
Member # 1998
|
posted
Will i have to remove my carpet? [ April 09, 2007, 03:56 AM: Message edited by: phat50 ]
-------------------- New toy coming soon!
Posts: 2860 | From: Richmond / Valley jo/ Petaluma | Registered: Oct 2002
| :
|
|
Blind
2.3L CAFords OG
Member # 3052
|
posted
I don't think so, you can swap the harness by just removing the kick panel than pulling the carpet back.
you may need to remove the drivers seat, door sill, and center console in order to pull the carpet back far enough.
-------------------- 89 LX Notchback ex 4cyl, 14psi 02 Harley F150, 15psi
Posts: 8521 | From: Fairfield | Registered: Jul 2003
| :
|
|
phat50
¯
Member # 1998
|
posted
ok thanks. is that all i need to do to make the 5-speed work is just change that harness? is there any other things or wireing for the tranny that i need to know? [ April 09, 2007, 04:23 PM: Message edited by: phat50 ]
-------------------- New toy coming soon!
Posts: 2860 | From: Richmond / Valley jo/ Petaluma | Registered: Oct 2002
| :
|
|