Author
|
Topic: Anyone have a good write up
|
sleeping stallion
¯
Member # 8162
|
posted
Anyone have a good write up on rear battery relocation I have the kit just not sure on best easiest way to route it and how to hook it up on a 90coupe
-------------------- 1990 coupe HCI Boost SEMPER FIDELIS
Posts: 1650 | From: Modesto ca | Registered: Jan 2008
| :
|
|
dohc90lx
¯
Member # 11863
|
posted
i ran my posative cable behind the tail lamp trim, up by the wheel well tucked in the corner inside the car between the rocker and floorpan then used the hole for the hood release to bring it in the engine bay, but i dont use my hood release cable anymore. i dont like it when people run them under the car. too many chances of something snaging it or it getting crushed on a rack or something. i also taped mine down with dynomat to keep it in place. a shutoff swithch is a good idea too.
Posts: 129 | From: antioch | Registered: Apr 2012
| :
|
|
norcalfiddy
¯
Member # 11207
|
posted
Run black cable to ground (on frame) and positive all the way to the front of car on the solonoid
-------------------- 600HP 1996 7.3L powerstroke single cab short bed race truck
Posts: 3393 | From: Brentwood | Registered: Aug 2011
| :
|
|
sleeping stallion
¯
Member # 8162
|
posted
What did u guys do with the negative cable that's on the front battery now. So from the rear positive run it to the solenoid and ground it to frame. Thanks my concern is that negative cable in front now
-------------------- 1990 coupe HCI Boost SEMPER FIDELIS
Posts: 1650 | From: Modesto ca | Registered: Jan 2008
| :
|
|
|