|
Author
|
Topic: Extended studs
|
D.R.E
¯
Member # 10484
|
posted
 
 
Hey guys my bearings on my hubs are bad so I plan on replacing them but they have the extend studs I would like to keep so where could I go to get them removed and pressed or could this be a DYI type job thanks
--------------------
Local 3 Operating Engineers member
1991 titanium frost coupe
1991 x chp coupe
Posts: 505 | From: Vallejo | Registered: Nov 2010
| :
|
|
D.R.E
¯
Member # 10484
|
posted
Anyone??
--------------------
Local 3 Operating Engineers member
1991 titanium frost coupe
1991 x chp coupe
Posts: 505 | From: Vallejo | Registered: Nov 2010
| :
|
|
straightliner1
¯
Member # 2679
|
posted
Any machine shop locally will be able to do it
Posts: 484 | From: Sacramento | Registered: Apr 2003
| :
|
|
D.R.E
¯
Member # 10484
|
posted
Thanks bro you got a rough idea of how much they will charge
--------------------
Local 3 Operating Engineers member
1991 titanium frost coupe
1991 x chp coupe
Posts: 505 | From: Vallejo | Registered: Nov 2010
| :
|
|
1fastmach1
¯
Member # 10137
|
posted
do it your self get a 2x4 and a hammer and hammer them out and when you want them in on your new hub get a lot of washers and the stud bolt tighten it down intill it preses in and thats it
--------------------
REDLINE MOTORSPORTS CC EST 2011
1993 CHP sold
2004 mach 1 408 Windsor n20 fed
R.I.P. JORGE GUTIERREZ JR
6/13/1982- 11/05/2013
Posts: 2592 | From: clawwwitter to 7th st | Registered: Jul 2010
| :
|
|
D.R.E
¯
Member # 10484
|
posted
Thanks bret
--------------------
Local 3 Operating Engineers member
1991 titanium frost coupe
1991 x chp coupe
Posts: 505 | From: Vallejo | Registered: Nov 2010
| :
|
|
1fastmach1
¯
Member # 10137
|
posted
yupp no problem
--------------------
REDLINE MOTORSPORTS CC EST 2011
1993 CHP sold
2004 mach 1 408 Windsor n20 fed
R.I.P. JORGE GUTIERREZ JR
6/13/1982- 11/05/2013
Posts: 2592 | From: clawwwitter to 7th st | Registered: Jul 2010
| :
|
|
8lbCoupe
¯
Member # 11416
|
posted
quote:
Originally posted by D.R.E:
Anyone??
Hit ma phone I have the impact gun to get them back in the axles
--------------------
"HEAVY DOSAGE"
Posts: 383 | From: Traffic | Registered: Nov 2011
| :
|
|
02angrybird
¯
Member # 11259
|
posted
You can also use a vise and a deep socket. I've always used a hammer to knock them out and a nut/washer to install them. You can do it how ever you want.
--------------------
KIH Willie Guzman
2002 WS6 RIP
2009 G8 GT DD
97 taco 4X4
98 TA under construction
Posts: 991 | From: san jose | Registered: Sep 2011
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
