|
Author
|
Topic: MAF Q???
|
SIKKSTANG
¯
Member # 1210
|
posted
 
 
Its me again wit another question. I bought a 70mm throttle body. Do I need to get a different MAF or am I fine with wut I got in there now
Thanks
Alex
--------------------
Burn rubber on you quick as hell, you need some toilet paper don't shit on yourself...
sikkstang.tripod.com
Posts: 121 | From: 925 / 650 | Registered: Apr 2002
| :
|
|
ray95
¯
Member # 752
|
posted
With your stock setup you don't need to get a new MAF right now. What other mods do you have? Gears, pullies, exauhst? Need some more info.
Posts: 895 | From: The Bay Area | Registered: Jan 2002
| :
|
|
SIKKSTANG
¯
Member # 1210
|
posted
I have a mac intake, i will put in my pullies soon, i got flows and 373s
--------------------
Burn rubber on you quick as hell, you need some toilet paper don't shit on yourself...
sikkstang.tripod.com
Posts: 121 | From: 925 / 650 | Registered: Apr 2002
| :
|
|
90gtverrt
¯
Member # 1437
|
posted
You dont need to get a MAF but it would be a good idea to get one just to take care of it now.......any future mods that start increasing air flow will start to see a restriction....I would just do it so you never have to worry about the sensor again.....my .02 cents
Mike
Posts: 1199 | From: Livermore, CA | Registered: Jun 2002
| :
|
|
SIKKSTANG
¯
Member # 1210
|
posted
wut size would be the best
--------------------
Burn rubber on you quick as hell, you need some toilet paper don't shit on yourself...
sikkstang.tripod.com
Posts: 121 | From: 925 / 650 | Registered: Apr 2002
| :
|
|
93PONY
Mr. Valve Events
Member # 60
|
posted
You will not gain much from a new MAF for the price.
Best $$$ for HP mods are Pullies & gears (4.10s).
--------------------
www.advancedenginedevelopment.com
SCT dealer
Dynotuning
(916)715-7569
Posts: 4265 | From: Fair Oaks, CA | Registered: Nov 2000
| :
|
|
saleen00925
¯
Member # 1302
|
posted
A new MAF will be tough to install with the MAC, some sawing and new tubing will be needed.
-adam cate
00-925
Posts: 244 | From: Sacramento CA | Registered: May 2002
| :
|
|
90gtverrt
¯
Member # 1437
|
posted
FOr size if your gonna get it I would go with the 73 for a N/A setup or for a forced induction/nitrous setup i would get the 76mm that should be plenty big and make sure it is calibrated to whatever size injectors you have on now.
Mike
Posts: 1199 | From: Livermore, CA | Registered: Jun 2002
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
