This is topic Weld RT-S71 Wheels and Tires 17” in forum FOR(D) SALE: at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=139730

---

Posted by 351w (Member # 11875) on :
 
Have a set of Weld RT-S Wheels, just had them powder coated Cadillac Grey, minor rash on one rear wheel on the inside from rubbing on the inner fenders, obviously not visible when the wheels are installed. Has new Mickey Thompson front runner tires and Mickey Thompson ET Street R rear tires. Included are short and tall Weld Center Caps.

17x4.5 Front Wheels (clears Cobra brakes)
17x10 or 10.5 Rear Wheels (see post below)
26” Front Runner MT Tires
275/40/17 ET Street R Tires

Less than 100 miles on the setup.

CaFords price special, $1650, absolutely positively FIRM, I will ignore low ball offers, go try and find a set of RT-S wheels with new tires for cheaper.

[ 2019-10-13, 01:47 PM: Message edited by: 351w ]
 

---

Posted by BigBen (Member # 10594) on :
 
Would you separate the front from the rears? I’m interested in the fronts
 

---

Posted by 351w (Member # 11875) on :
 
ttt
 

---

Posted by 351w (Member # 11875) on :
 
ttt
 

---

Posted by 351w (Member # 11875) on :
 
ttt, backspace is 6.750, wheels are either 17x10 or 17x10.5, can’t measure accurately with tire mounted, that makes offset 30 if x10.5 or 25 if x10
 

---

Posted by 351w (Member # 11875) on :
 
ttt
 

---

Posted by 351w (Member # 11875) on :
 
ttt
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com