This is topic for sale 351 stroker to 427 in forum FOR(D) SALE: at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=125526
Posted by tr mach (Member # 10785) on
:
351w stroked to a 427w this engine was well built an is ready for a beatin , JE piston .40 over # 232469 -30cc custom made for this application cost $1000 jus for pistons, Eagle crank , I beam rods roller coverted also has front sump pan for an older ford motor was assembled for a A/c Cobra kit car made over 500 with small cam motor has been freshend up with all new parts comes with dampner flywheel an ArP bolt thru out whole motor jus needs heads to be bolted down an check push rod clearance to get correct size heads are AFR heads 205 58 cc I'm going to pick n up from the machine shop today ..... comes with two sets of springs for head an roller rocker girdles this build wold cost over 10grand to build from scratch .
$4500 firm
Text & Call 6507226980
[ 2015-01-23, 05:51 PM: Message edited by: tr mach ]
Posted by tr mach (Member # 10785) on
:
Ttt
Posted by tr mach (Member # 10785) on
:
Ttt
Posted by tr mach (Member # 10785) on
:
Heads is Afr 205 58cc A/F search # 6107 v2
Posted by v-town coupe (Member # 2771) on
:
Stock or aftermarket block?
Posted by tr mach (Member # 10785) on
:
Stock block
Posted by tr mach (Member # 10785) on
:
Ttt
Posted by tr mach (Member # 10785) on
:
Ttt
Posted by tr mach (Member # 10785) on
:
Bump
Posted by tr mach (Member # 10785) on
:
Ttt
Posted by tr mach (Member # 10785) on
:
Ttt
Posted by tr mach (Member # 10785) on
:
Bump
Posted by tr mach (Member # 10785) on
:
Ttt
Posted by tr mach (Member # 10785) on
:
$3000 shortblock
$1600 heads
Posted by tr mach (Member # 10785) on
:
Ttt
Posted by 90coupe5oh (Member # 13652) on
:
What kinda number does this out out??
Posted by 89TRUNK (Member # 2506) on
:
What year block?
Posted by iceman302 (Member # 7180) on
:
What stroke are you running to end with a 427 at a 4.04 cylinder bore?
Posted by spwelds09 (Member # 13179) on
:
I might be interested in just the short block, do you have a build sheet on the motor? Any details send please 916 662 2031
Fueled by Ford Mustang Owners
on CaliforniaFords.com