This is topic FS: 88 roller block 302 carb set-up 5.0L in forum FOR(D) SALE: at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=125507
Posted by RRRCobraSC281 (Member # 7086) on
:
The block was hot tanked and rehoned
New Pistons and ring/seal
New Main and cam Journals
New edlebrock roller cam
New cam sprocket
new cam chain
new oil pump
new water pump (short shaft)
Timing cover and auxillaries for 94-95 GT set-up new or like new
New gaskets and seals from top to bottom.
Edelbrock top end kit 2091 (w/roller lifter cam):
Performer heads
air gap intake
SS rockers
Holly street Avenger 670 CFM carb with electric choke
Only thing that was reused was the block, push rods, rods, main crank, and oil pan
$2,500 firm
Just the top end kit from summit racing alone is $2,269.95
plus getting new seals and bearings, an engine block that has been cleaned and painted, plus a re-manufactured to new specs Holley carburetor, new pistons and all the auxiliaries.
[ 2015-01-15, 01:24 AM: Message edited by: RRRCobraSC281 ]
Posted by RRRCobraSC281 (Member # 7086) on
:
TTT
Posted by RRRCobraSC281 (Member # 7086) on
:
TTT
Posted by RRRCobraSC281 (Member # 7086) on
:
TTT
Posted by RRRCobraSC281 (Member # 7086) on
:
TTT
Posted by RRRCobraSC281 (Member # 7086) on
:
TTT
Posted by RRRCobraSC281 (Member # 7086) on
:
TTT
Fueled by Ford Mustang Owners
on CaliforniaFords.com