This is topic FS: Brembo brake kit 4 piston calipers 14" rotors in forum FOR(D) SALE: at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=123485
Posted by RRRCobraSC281 (Member # 7086) on :
 
Currently doing a coyote swap on a fox and will not be able to make use of these Brembo brakes and rotors.

Removed from a 2013 Mustang GT equip with track package and only 22,800 miles. Pads still have a lot of life left in them.

Prefer local sale since I know that the 14" rotors will not fit a USPS flat rate box. Buyer pays for shipping.

pair of brembo calipers
pair of 14" rotors

$600 + shipping

If you just want the calipers then $600 shipped.


-

[ 2014-09-21, 01:29 PM: Message edited by: RRRCobraSC281 ]
 
Posted by URFNSLO (Member # 9750) on :
 
Does anyone make a crossover bracket to the sn95s for these?
 
Posted by RRRCobraSC281 (Member # 7086) on :
 
If it was possible i would have done it already. Problem is that there isn't enough clearance between the mounting bolts to off set the caliper with a bracket. I plan on buying the cobra r brembo brake kit.
 
Posted by uglygun (Member # 13234) on :
 
quote:
Originally posted by RRRCobraSC281:
If it was possible i would have done it already. Problem is that there isn't enough clearance between the mounting bolts to off set the caliper with a bracket. I plan on buying the cobra r brembo brake kit.
Did you try these guys?
http://www.vintagevenom.com/
 
Posted by *BlownMach1*- TRMYN8R (Member # 5400) on :
 
Ya what he said^^ they do make a kit. They put GT500 brembo brakes on a SN95. Don't know how much it cost but they do sell the stuff to do it
 
Posted by Frank.JD.Perez (Member # 12650) on :
 
quote:
Originally posted by uglygun:
quote:
Originally posted by RRRCobraSC281:
If it was possible i would have done it already. Problem is that there isn't enough clearance between the mounting bolts to off set the caliper with a bracket. I plan on buying the cobra r brembo brake kit.
Did you try these guys?
http://www.vintagevenom.com/
dude i think i love you for posting this...
 
Posted by v-town coupe (Member # 2771) on :
 
Tobin @kore3 is a sharp fella. If your considering these brakes for your car and see what he can do.

www.kore3.com
 
Posted by RRRCobraSC281 (Member # 7086) on :
 
My project is a 90 coupe. My concern with this is how are the wheels stick out. $450 for the adapter kit.
 
Posted by RRRCobraSC281 (Member # 7086) on :
 
My project is a 90 coupe. My concern with this is how are the wheels stick out. $450 for the adapter kit.
 
Posted by ZincYellow 281 (Member # 9865) on :
 
Pm sent
 
Posted by *BlownMach1*- TRMYN8R (Member # 5400) on :
 
Just run 05-14 offset wheels up front. It will be fine
 
Posted by RRRCobraSC281 (Member # 7086) on :
 
Still for sale.

[ 2014-09-21, 01:31 PM: Message edited by: RRRCobraSC281 ]
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com