Parting Out or Selling Whole 94 GT R302 331 S-Trim - Northern California Ford Owners

This is topic Parting Out or Selling Whole 94 GT R302 331 S-Trim in forum FOR(D) SALE: at Northern California Ford Owners .

To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=120185

Posted by racsirx (Member # 1710) on :

Parting Out or Selling Whole 94 GT, blue exterior, gray leather interior, 94K original miles, Vortech S-trim, Anderson Powerpipe, Crane Boost Retard, Ford Motorsport R302 Block stroked to a 331 built by Keith Craft, H-beam rods, JE Dish pistons, Eagle steel crank, SFI balancer, Canton 7QT Drag Oil Pan, Edelbrock Performer 2.02" Valve heads, aluminum flywheel, FMS 65mm Throttle Body, Extrude Hone Stock Intake, FMS Ceramic Coated Shorty Headers, 2.5" X-pipe with cats, Flowmasters, Tremec TKO II with Pro 5.0 Shifter 26 Spline Setup, APEX Dual Kevlar clutch, 3:55 gears, 13" Baer Front Brakes, 12" Baer Rear Brakes, Tokico illumina Struts & Shocks, Eibach Pro Kit Springs, 17" Chrome Factory Tri Bar Wheels, also gloss black SVE Drag wheels 17" fronts & 15" rears, Offset Rack Bushings, can hear it run and drive it before I pull the motor & tranny, all the work was done at APEX Motorsports, $13.5K or will part out

Vortech S-trim with Anderson Powerpipe, Crane Boost Retard, Boost and Fuel gauges, $2500

SVE gloss black Drag rims, 17" fronts with M&H tires, 15" rears with MT Drag Radials, $1500

331 Long Block, R302 Block, 4 bolt mains, Edelbrock Performer Heads, SFI Balancer, Canton 7QT drag oil pan, Melling oil pump, aluminum flywheel, $6K

Tremec TKO II with Bellhousing, Pro 5.0 Shifter, FMS Aluminum Driveshaft for 87-93, APEX Dual Kevlar Clutch 26 spline setup, $1500

Rolling Chassis with 13" front Baer & 12" rear Baer brakes, Eibach Prokit springs, Tokico illumina adjustable struts & shocks, offset rack bushings, 3:55 gears, stock chrome 17" Tri-Bar rims, $3500-SOLD

[ 2014-05-23, 06:38 PM: Message edited by: racsirx ]

Posted by 1SLOWLX (Member # 558) on :

Lol you're the one that outbid me on eBay good luck in doubling your money

Posted by racsirx (Member # 1710) on :

quote:
Originally posted by 1SLOWLX:
Lol you're the one that outbid me on eBay good luck in doubling your money

Thanks Albert, I will try, lol, I went on Saturday to verify if it had an R-block first, I wouldn't have bought it it was a stock block, if I would have known if it was an R-block when it was on Craigslist last year I would have bought it then.

Posted by 1SLOWLX (Member # 558) on :

I agree this car has been for sale for a while first time he had the r block in the add got me to try and grab it but sn95's are kinda ugly. Great deal though you got it in the last seconds of the auction.

[ 2014-03-31, 08:41 AM: Message edited by: 1SLOWLX ]

Posted by jmcclesk (Member # 1355) on :

I wish it was a na motor I would be all over this!! GLWTS.

can you post a pict of the car

[ 2014-03-31, 08:44 AM: Message edited by: jmcclesk ]

Posted by racsirx (Member # 1710) on :

quote:
Originally posted by 1SLOWLX:
I agree this car has been for sale for a while first time he had the r block in the add got me to try and grab it but sn95's are kinda ugly. Great deal though you got it in the last seconds of the auction.

I put my bid in the last 15 minutes, you and the other bidder didn't come in until the last 40 seconds or so and man it was crazy, but I would have went to $10K if I had to, but that's just me

Posted by racsirx (Member # 1710) on :

quote:
Originally posted by jmcclesk:
I wish it was a na motor I would be all over this!! GLWTS.

can you post a pict of the car

I am waiting for a response back from Keith Craft to find out what compression the motor is, I have part of the build sheet and the order form but nothing with the compression like my last Keith Craft motor.

Posted by 1SLOWLX (Member # 558) on :

Damn 10k wow I wouldn't have paid that for the car r block or not but I'm a cheap ass

Posted by URFNSLO (Member # 9750) on :

Can we get some pics por favor?

Posted by Stanced Stang (Member # 11891) on :

Does the car have C/C plates?

Posted by Scoop (Member # 8726) on :

Any idea of what numbers it put out?

Posted by racsirx (Member # 1710) on :

Pics coming soon once the weather gets better,

Sorry I don't have any camber caster plates for sale

Posted by NEIGHT (Member # 8741) on :

What you want for the shortblock?

Posted by 90chp coupe (Member # 11689) on :

Does it have an aftermarket k member and a arms?

Posted by coupe5oh (Member # 10411) on :

[ 2014-03-31, 07:19 PM: Message edited by: coupe5oh ]

Posted by racsirx (Member # 1710) on :

quote:
Originally posted by NEIGHT:
What you want for the shortblock?

Sorry I want to sell as a long block

Posted by racsirx (Member # 1710) on :

quote:
Originally posted by 90chp coupe:
Does it have an aftermarket k member and a arms?

Sorry it doesn't have aftermarket K-member and A arms

Posted by racsirx (Member # 1710) on :

quote:
Originally posted by Scoop:
Any idea of what numbers it put out?

I have a dyno sheet but I think the ported stock intake and the stock 3.33 blower pulley is holding it back from making real numbers

[ 2014-04-02, 10:15 AM: Message edited by: racsirx ]

Posted by 5.0soclean (Member # 8983) on :

interested I selling the blower assy?? was that the motor out of the black 95???

Posted by racsirx (Member # 1710) on :

quote:
Originally posted by 5.0soclean:
interested I selling the blower assy?? was that the motor out of the black 95???

I can sell the blower setup, no this is not the motor from the black 95, that was a stock block, this one is an R-block.

Posted by racsirx (Member # 1710) on :

ttt

Fueled by Ford Mustang Owners
on CaliforniaFords.com