This is topic Long shot but high quality Lsx stuff, motors, blocks, 6 speed, rods, etc in forum FOR(D) SALE: at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=119967

---

Posted by 1sick65 (Member # 3957) on :
 
Tr6060- from a 2010 camaro, good running condition. Had a tab break but was repaired and all is well. $1650

LS3 Aluminum block. Previously a Texas speed build. Motor is at 4.075". Has a light stain in 2 bores but nothing you can feel. $1000

LSA Heads- castings and valves, no springs or retainers. Came off ZL1 less than 8k miles. $old

Callies Compstar 6.125" rods. Used in good shape. ARP2000's. $450

2003 110k mile 6.0 longblock. Good running shape. $1000

2004 8xxxx mile 6.0 shortblock, with heads that were taken off. $750

2010 camaro exhaust manifolds. $125

LS3 corvette exhaust manifolds. $125

2 unknown c6 corvette catbacks, both stainless. $250 each

Are prices are OBO but that being said no low ball offers.






















For quickest response text 9167518861
 

---

Posted by 1sick65 (Member # 3957) on :
 
Ttt
 

---

Posted by fiftwyz (Member # 8351) on :
 
Try racing junk
 

---

Posted by Hungry Hippo (Member # 537) on :
 
Are one of those exhausts for a z06 by any chance(3" piping)?
 

---

Posted by 65mustang408 (Member # 8681) on :
 
any junk bare blocks?
 

---

Posted by 65mustang408 (Member # 8681) on :
 


[ 2014-03-22, 07:16 AM: Message edited by: 65mustang408 ]
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com