This is topic HELLA PARTS!! Cleaning up the yard in forum FOR(D) SALE: at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=118286
Posted by Blow_U_In_Reverse (Member # 12298) on :
 
-1993 Cobra Upper & Lower Intake with 1" spacer.. REAL 93 cobra intake, not a replica or explorer gt40.. Gloss Black.. Included gasket, spacer, and hardware..
**$300**

-DSS Main Girdle for Small Block Ford 302 motors.. Comes with ARP hardware!!
**$150**

-1.7 Comp Cam Cobra Roller Rockers.. Pedestal mount.. Includes hardware!!
**$140**

-FoxBody Mustang 5.0 BBK Power Plus 75mm Throttle Body & EGR Spacer.. NO sensors..
**$150**

-1989 Mustang 5.0 EFI harness.. Mass Air setup with main harness, mass air harness, and injector harness.. NO ecu.. Has relays, MAP sensor, etc..
**$100**

-Granatelli Rear Coilover kit for any solid rear axle rearend.. its Koni Yellow shocks(one shock is blown, other one is good).. Will fit 79-04 SRA Mustangs.. Pretty stiff setup.. COMPLETE coil over kit..
**$225**

-TrickFlow Stage 1 Cam for SBF.. Less than 2 hours run time.. Have receipt for it.. Its a TFS-1 which is one of the best off the shelf cams.. Best Trick Flow cam for street/strip setup..
**$165**

-Smoked LED tail lights for fox body.. NOT a cheap flea market one.. Looks real nice and bright..
**$120**

-Stock LX tips.. Tail Pipes are polished but needs some love to bring back the shine.. In great condition though.. NO rust holes or anything..
**$100**

-Autometer AutoGauge Mechanical oil pressure ad water temperature gauges.. barely used.. still have boxes for them.. only missing nylon line for oil pressure but all other fittings and everything are there..
**$50 for both**

-Stock 85 carb.. Holley carb OEM.. NEEDS TO BE REBUILT since it has been sitting outside for almost a year..
**$75**

-Front 5 lug for foxbody.. Hub, rotors, calipers, & brake pads.. I was using it with stock spindles.. Sitting outside so rusted up..
**$40**

-InTrax Rear Lowering Springs for cars with IRS.. Rears ONLY.. Can only be used with Independant Rear Suspension.. 2" drop..
**$50**

-NAPA foxbody distributor Ignition Module..
**$20**

-Procharger Front Mount InterCooler and piping for foxbody PLUS a BLOW OFF VALVE.. INTERCOOLER, PIPING, AND BOV ONLY; NO PROCHARGER!! 2.5" aftermarket intercooler.. 2.5" intercooler piping from head unit to intercooler, BOV before intercooler.. 3" piping from intercooler to intake.. All pipes are cut and setup for a foxbody 5.0 with a driver side mounted super charger or procharger..
**$300 for FMIC, Piping, & BOV**

-Metal heater lines that go on the lower intake..
**$20**

FEEL FREE TO MAKE REASONABLE OFFERS.. NO LOWBALLERS..

CALL/TEXT when you have CASH IN HAND & are READY to pick up..

6502485682

-FiJi- [patriot]

trade for
79-93 caster camber plates
bilstein front struts
Non offset tubular A arms
70mm tb & EGR Spacer for fox (dont ask, im an idiot for selling mine)
351w upper/lower intake or lightning/gt40 351 lower intake..

I can add cash or u can add cash on top of a trade..

[ 2014-01-23, 10:15 PM: Message edited by: Blow_U_In_Reverse ]
 
Posted by MustangCCH (Member # 12345) on :
 
Pm sent
 
Posted by red5o (Member # 12651) on :
 
How much for just the 1 inch intake spacer
 
Posted by Blow_U_In_Reverse (Member # 12298) on :
 
quote:
Originally posted by red5o:
How much for just the 1 inch intake spacer
Wanna sell it togethr with the intake bro
 
Posted by *EPIK* (Member # 7481) on :
 
Damnit! If I had more cash right now, I would cop the F cam, injectors, maf, & 75 mm TB... Money is tight though, so if you have a few of those parts in a week or 2, I will pick em up.
 
Posted by spwelds09 (Member # 13179) on :
 
I will give you a 150 for the fcam if you could run it to Livermore?
 
Posted by Blow_U_In_Reverse (Member # 12298) on :
 
quote:
Originally posted by *EPIK*:
Damnit! If I had more cash right now, I would cop the F cam, injectors, maf, & 75 mm TB... Money is tight though, so if you have a few of those parts in a week or 2, I will pick em up.
Just hit me up when ur ready bro and we'll work something out..
 
Posted by Blow_U_In_Reverse (Member # 12298) on :
 
quote:
Originally posted by spwelds09:
I will give you a 150 for the fcam if you could run it to Livermore?
PM sent
 
Posted by Blow_U_In_Reverse (Member # 12298) on :
 
UPDATED

351w, racing seats, and pro 5.0 shifter are gone..

F303 cam, power steering relocation/AC delete kit, & distributor sale pending..

TTT

[ 2014-01-17, 07:10 PM: Message edited by: Blow_U_In_Reverse ]
 
Posted by red5o (Member # 12651) on :
 
quote:
Originally posted by Blow_U_In_Reverse:
quote:
Originally posted by red5o:
How much for just the 1 inch intake spacer
Wanna sell it togethr with the intake bro
Let me know if you change yore mind
 
Posted by Blow_U_In_Reverse (Member # 12298) on :
 
70mm tb & spacer and ac delete pulley sold
 
Posted by Blow_U_In_Reverse (Member # 12298) on :
 
42lb maf & injectors sold..
[patriot]
 
Posted by Blow_U_In_Reverse (Member # 12298) on :
 
Bbk cold air & h pipe sold

bump
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com