This is topic tb intake injectors fuel rails valve covers rrs heads short block 302/351 in forum FOR(D) SALE: at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=117986
Posted by HighwayOn22s (Member # 7440) on
:
trade what do you have?
i will trade for a nice set of 5lug rims 17" or 18" must be clean.. sbc air gap intake or rpm air gap
motors------
complete 98 explorer gt40p 5.0 ??? on a rebuild looks fresh... with oil coloer fox 65mm tb and egr. no water pump $1100
306 short block 0 miles.. I built this 306 trw .030 pistons $1000 if your Sirius I will brake it down and reassemble it in front of you..........or I can upgrade the bearings and rings at your expense
I port the heads and intakes if you want to get them flowed I will work something out with you. I can do it all but my time is not cheap
///////////heads/////
trick flow high port 188 heads 0 miles on a complete rebuild $900 will pass smog
ported gt40 heads $450
ported gt40p heads $450
not ported gt40p heads $250
ported e6 heads flow better then stock gt 40 heads $300 will pass smog
ported e7 heads flow better then stock gt 40 heads $300 will pass smog
////////////////////intakes////
bbk cold air intake $120
bbk cold air intake $99 no filter
65mm tb and egr $130
bbk 70mm tb and egr $180
Edelbrock Performer RPM II EFI Intake Manifold (86-95 5.0L) $500
Holley Systemax Intake Manifold EFI 5.0 Liter 1986-1995 $500
i also have a 351 lower $190
gt40 intake ported 86/95 $250
gt40 intake not ported but taped and ready to bolt on 86/95 160
351 gt40 lower ported $300
ported stock 86/93 and 94/95 mustang upper and lower with explorer top plate looks nice and flows great $150
//////////////roller rockers//////
jba 1.72 3/8 stud mount roller rockers $190
svo 1.6 3/8 stud mount roller rockers $130
new in the box 1.6 sbf shaft mount roller rockers $450
/////////////valve covers//
holley Valve Covers $160
tall edelbrock Script Valve Covers $100
cobra valve covers $100
//////////////fuel
new style 4 hole 19lb injectors $45
75mm maf for 19lb injectors $50
new style 4 hole 24lb injectors $50
76mm maf for 24lb injectors $50
bbk maf for 30lb injectors $150
new style 4 hole 30lb injectors $100
32lb injectors $120
36 lb injectors $150
1 only 1 42lb injector $50
//////////////ignition////
street fighter dizz msd wires $125 like new
Crane Cams Multi-Spark Capacitive Discharge Ignition Box $100
msd coil $30
//////////////////suspension
mm fox a arms $290
4 lug disc brake rear end with 355 gears $450
//////////////body parts
gray hatch quarter panels $35
doors $45
(((((call for all info))))))510 978 9994 mike
[ 2014-01-20, 06:00 PM: Message edited by: HighwayOn22s ]
Posted by HighwayOn22s (Member # 7440) on
:
ttt
Posted by HighwayOn22s (Member # 7440) on
:
ttt
Posted by HighwayOn22s (Member # 7440) on
:
ttt
Posted by HighwayOn22s (Member # 7440) on
:
ttt
Posted by HighwayOn22s (Member # 7440) on
:
ttt
Posted by IH8WNTR (Member # 13212) on
:
Your pm's are full.
Posted by HighwayOn22s (Member # 7440) on
:
thanks. call for all info 510 978 9994 mike
Posted by HighwayOn22s (Member # 7440) on
:
ttt
Fueled by Ford Mustang Owners
on CaliforniaFords.com