Shortblock, Heads ect...lots of parts - Northern California Ford Owners

This is topic Shortblock, Heads ect...lots of parts in forum FOR(D) SALE: at Northern California Ford Owners .

To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=109625

Posted by Konman (Member # 10420) on :

My plans have changed for the 240Z project so I would like to sell all of my Ford stuff I have accumulated over the years owning three Mustangs.

I am firm on the prices...if they are too high for you please move on.

$1400 -- bought from 70Mach351 on this forum

385w full roller stroker shortblock 1974
Forged Pistons - boost (low compression)
H-beam rods
Not sure if the crank is forged
All ARP bolts
DSS main girdle
Crane or Comp bar style roller lifters
Roller cam

$200 NIB
Comp cams
Duration 270/276, Lift .512/.512, Ford, 5.0L

$550

GT40X heads- Mild port job -- 1/2 head bolts where on my 351w
Milled to 58cc
Valve springs are good for .700 lift
AFR guideplates
Crane 1.6 rr's

$500
World Class T5 + bellhousing

$150
95 Cobra upper and lower intake

$125 -- bought from Haulinass (didn't tell me about the bolt)
95 Cobra upper and lower itnake - ghetto spray painted on the car...bought like that
one broken bolt in the lower intake

$275 --SOLD
GT40 5.8 EFI lower intake

$150 each
1991 Mass air harness and A9L computer
1989 Mass air harness and A9S computer -- SOLD

$75
Ford 24lbs inj

$120
CL 76mm mass air for 24lbs

$90 NIB
ARP stepped head bolts to use 351w heads

$250
Eaton posi unit with 3.55 gears ---assembled

$150

Factory H-pipe...only used for smog. Still looks brand new

$30 each
1/2" intake spacers GT40

$40
Koni single adj rear shocks 15K (Foxbody)

[ December 13, 2012, 07:58 PM: Message edited by: Konman ]

Posted by Duncan Motors (Member # 7045) on :

dam gd deals on some stuff there.

Posted by 925_GT (Member # 11891) on :

PM sent.

Posted by 89FxBdy (Member # 11121) on :

quote:
Originally posted by Duncan Motors:
dam gd deals on some stuff there.

Posted by Konman (Member # 10420) on :

Thanks guys...honestly not trying make $$$ on the parts. Will keep them if they don't sell.

Posted by 925_GT (Member # 11891) on :

quote:
Originally posted by Konman:
Thanks guys...honestly not trying make $$$ on the parts. Will keep them if they don't sell.

I didnt get a reply. Are the heads still for sale?

Posted by Konman (Member # 10420) on :

Yes, heads are still available. I just replied to all the PM's in order received.

They have 10K on them and were on my other 351w.

Posted by notch_306_stang (Member # 7266) on :

Pm sent

Posted by Konman (Member # 10420) on :

All pm's have been replied to.

Posted by 90coupe50 (Member # 10848) on :

Pm sent

Posted by Konman (Member # 10420) on :

ttt

Fueled by Ford Mustang Owners
on CaliforniaFords.com