This is topic Professional Products Intake, 95 GT parts, 66 mustang parts, SBC, Rims in forum FOR(D) SALE: at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=109611
Posted by 331-66 Coupe (Member # 12453) on
:
Professional Products Typhoon Intake, ported and polished
Heat Sink, 30lb injectors, Professional Products Fuel Pressure Regulator, C and L elbow, svo elbow, PMass calibrated MAF sensor, professional products throttle body
Pulled off a 95 5.0 GT to run a carb intake,
550obo
95 GT distributor with MSD cap and wires
75obo
Stock 289 Heads with smog tubes
50obo
Stock 289 shortblock
good for core or for a stroker rotating assembly, needs full machine and rebuild
100obo
TRI-Y headers for mockup, have a leak at flange, flanges have been cut to try and even them up against head
25obo
Plastic SBF valve covers, red
10obo
2 14x7 Torq Thrust D rims with Radial TA's one tire is good other is not one rim has curb rash
150obo
NON FORD
2006 SRT8 jeep rims
all have curb rash, one needs repair as it leaks
300obo
SBC Slant Plug heads 2.02 valves upgraded springs and retainers
200obo
[ December 10, 2012, 07:03 PM: Message edited by: 331-66 Coupe ]
Posted by 331-66 Coupe (Member # 12453) on
:
BUMP
Fueled by Ford Mustang Owners
on CaliforniaFords.com