96-04 4.6 Turbo Hotside And K member & A-arms forsale

This is topic 96-04 4.6 Turbo Hotside And K member & A-arms forsale in forum FOR(D) SALE: at Northern California Ford Owners .

To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=109413

Posted by blownstang98 (Member # 5469) on :

like the title says. Selling my On3 1st gen hotside. Its on a 98gt. Nothing wrong with it just upgrading the hotside and changing suspension. The susp has around 7k on it. it will need new A-arm bushings and i would put new ball joints in as well. THe Hotside has 300 miles on it and a couple trips to the track. Car made 450hp and 442tq through and auto on 10lbs of boost. Went 10.88 on the 10lbs. Pictures are from when i put it on the car. Everything is still installed on the car so i will have to take it off if you want it. Id like 1300 OBO best way to get ahold of me is through pm or text me 530-262-2429

http://youtu.be/VBxZtPafot4?t=20s
http://youtu.be/69-usRKnirQ

Piping has been made to work with an Auto so should work with auto or manual. Also Comes with Exhaust.

[ November 29, 2012, 05:12 PM: Message edited by: blownstang98 ]

Posted by SLO50 (Member # 10470) on :

What is included not to familiar with turbos but interested

Posted by blownstang98 (Member # 5469) on :

Everything that runs from the exhaust manifolds to the turbo. So it runs a pipe from each manifold to a y pipe that runs forward to the turbo flange that you mount the turbo on. Then it will incloud the down pipe that runs from the turbo to under the car. Iam also inclouding the exhaust that hooks up to the downpipe that runs to the axle and dumps. So to finish the kit you would need to do the cold side. Either run an intercooler in the front and make the piping for it or run a non intercooled setup whatever you would want. Hope that all makes since. Feel free to text or call me if you have more questions.

Posted by blownstang98 (Member # 5469) on :

all PMs replied to.

thanks

Posted by SLO50 (Member # 10470) on :

Oh ok still would need turbo and many other components

Posted by blownstang98 (Member # 5469) on :

yes you would still need some things to complete the kit. I might incloud the turbo for the right price. Looking to upgrade that as well.

Posted by blownstang98 (Member # 5469) on :

TTT

Posted by blownstang98 (Member # 5469) on :

Ttt. Obo guys make me an offer need this stuff gone.

Posted by blownstang98 (Member # 5469) on :

Ttt. Obo.

Posted by blownstang98 (Member # 5469) on :

Ttt. Obo guys make me an offer need this stuff gone.

Posted by blownstang98 (Member # 5469) on :

TTT

Posted by blownstang98 (Member # 5469) on :

TTT 1200 or Best offer...

Posted by blownstang98 (Member # 5469) on :

800 for hotside full exhaust and Wastegate

325 for K member and A arms.

Need it gone. OBO

Posted by blownstang98 (Member # 5469) on :

Ttt. Obo.

Posted by blownstang98 (Member # 5469) on :

TTT

750 hotside
300 susp.

Posted by blownstang98 (Member # 5469) on :

TTT someone buy this up.

Posted by blownstang98 (Member # 5469) on :

TTT OBO. SOMEONE BUY IT. NEED IT GONE>

Posted by blownstang98 (Member # 5469) on :

TTT

Posted by blownstang98 (Member # 5469) on :

TTT

[ December 18, 2012, 12:43 PM: Message edited by: blownstang98 ]

Posted by blownstang98 (Member # 5469) on :

Back to the top again......

Fueled by Ford Mustang Owners
on CaliforniaFords.com