Parting Out 91 GT with Maximum Motorsport - Northern California Ford Owners

This is topic Parting Out 91 GT with Maximum Motorsport in forum FOR(D) SALE: at Northern California Ford Owners .

To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=108817

Posted by racsirx (Member # 1710) on :

Parting out 1991 Black Convertible GT- 83k documented, black interior, black top, 2" Cowl hood, shaved trunk lid, shaved doors with no handles or key holes, new headliner,
Autopower Rollbar,Trunk mount battery with 2/0 cable and a 3g alternator conversion, Trickflow Twisted Wedge 170's heads, new Hypertech Ram-Air, 90mm Lighting MAF
Snow Stage 2 Meth injection, Powerdyne Supercharger rebuilt with uprated parts(but planned on rebuilding and maxing boost capacity)6 psi or 8psi pulleys, Zex EFI Dry complete system with 4 jets up to 150hp I believe, 70mm Hurricane upper/lower intake with 1" spacer, BBK longtubes,
BBK 2.5" H-pipe with cats for longtubes, Flowmaster 2 chambers, Flowmaster Hushpower, R302 Bare Block, new Moroso Girdle with windage tray, new Melling HV pump, Moroso 7 qt pan and pickup, new ARP head bolts, New Clevite main and rod bearings STD/STD, New Total Seal gapless piston rings, new Prothane motor mounts, 42lb injectors, Vortech fuel rails, 2 core aluminum radiator, new Flowcooler aluminum water pump, new silicone hoses,
GForce T-5 synchronized gearset and 28 spline H/D input shaft, McLeod SFI Bellhousing, Pro 5.0 Shifter, new Gforce billet transmission crossmember, new Poly tranny mount, new FMS- Steel input shaft sleeve(retainer) new Fidanza rebuildable Aluminum Flywheel for 28oz, 50oz or zero balance, FMS Aluminum Driveshaft , 8.8 Rearend welded axle tubes to pumpkin with 3:73s, new Powder coated Ford Blue Calipers, new FMS Carbon Fiber friction kit with heavy duty S spring, Summit Racing aluminum gear cover, front brakes are a custom setup that were put together with Hydro assist, new 2011 Mustang GT aluminum calipers,new Focus SVT 12" drilled and slotted rotors, Maximum Motorsports S/S braided lines, new Hawk Pads, 2004 Cobra Hydro assist system - 22k miles- AN-8 fittings, 2004 Cobra Hydro master cylinder - 22k miles, 2004 Cobra rack - 22k miles, Maximum Motorsports - Fox to Cobra conversion steering shaft, new UPR Chromoly K member with Maximum Motorsport SN95 Arms, Autopower 4 point Convertible bolt in Rollbar, new Carrera/QA1 Rear Coilovers 12 way adjustable with H/D upper and lower mounts, new UPR rear Coil-over springs, new Steeda Hollow front sway bar, new Steeda adjustable rear swaybar , new MM K-member 2-point brace, MM 94-95 Front Control Arms - offset 3/4", MM HEAVY DUTY Torque-arm, MM Panhard Bar, new MM XL Series Full-length Subframe Connectors, new MM Coil-over Conversion Kits, new Bilstein HD series struts , new Eibach Front Coil-over springs, new MM Caster/Camber Plates, MM 99-04 H/D Rear Lower Control Arms and mounting bolts(14mm vs 12mm), new MM Solid Steering Shaft, new MM Strut Tower Brace, 94-95 Front Spindles - with hubs machined to 4 lug (allowing use of the 2011 calipers and Focus 12" rotors) , Cobra Rs 4 lug wheels- 17x9 fronts & 17x10 rears with new Fulda Tires 17x245x45f - 17x275x40r

Please bare with me to go through all the boxes of stuff so I can figure out prices, I bought a whole storage unit of parts, I will try to post prices as I go

Maximum Motorsport Strut Tower Brace-SOLD
Cowl Hood-SOLD
FMS Aluminum Driveshaft with no Yoke & U-joints-$100
FMS R-block , bare block, already machined-$1400
Maximum Motorsport Steering Shaft for Cobra Rack-SOLD
Maximum Motorsport Heavy Duty Torque Arm-SOLD
Maximum Motorsport Panhard Bar-SOLD
Maximum Motorsport Full Length Subframes Powdercoated-SOLD
Maximum Motorsport Lower Rear Control Arms-SOLD
Front Bumper-SOLD
Fidanza Aluminum Flywheel-SOLD
TFS Twisted Wedge Heads Pedestal Mount-$700
BBK 1 5/8" Longtubes with H-pipe with Cats-SOLD
Moroso Oil Pan with pickup-$150
Pro 5.0 Shifter for a T-5 SOLD
Summit Racing 8.8 Differential Cover-$100
8.8 Rearend with 3:73 gears, welded axle tubes, no axles, no brakes-SOLD
New 91-93 Convertible Headliner-$150
04 Cobra Rack-SOLD
3G Alternator-SOLD
Vortech Fuel Rails-$150
Shaved Trunk Lid-SOLD
1.7 Rockers-SOLD
New UPR Chrome Moly K-member without control arms-$300
Maximum Motorsport 94-04 Front Control Arms-SOLD
Maximum Motorsport 90-93 Camber Caster Plates-SOLD
Front Bilstein Front Struts-SOLD
17" Cobra Rs-SOLD
Xentec HID Kit-SOLD
Black Front Seats-SOLD
Headlights-SOLD
Fog Lights-SOLD
Black Carpet-SOLD
Front & Rear Coilovers-SOLD
Steeda Swaybars-SOLD
Carrera/QA1 Rear Shocks-SOLD
Maximum Motorsport K-member Brace-SOLD
87-93,New Mishimoto Hose Kit-SOLD
GForce T-5 SOLD
Speedo Cluster-SOLD

[ December 23, 2012, 10:59 AM: Message edited by: racsirx ]

Posted by mrsmcizzle (Member # 9643) on :

How much for the torque arm & panhard bar?

Posted by 50Reasons (Member # 6452) on :

.price on k member and arms once you get it off the car also want to know if it changes wheel base

[ November 11, 2012, 01:04 PM: Message edited by: 50Reasons ]

Posted by FordRyderz510 (Member # 6771) on :

How much for the hood?

Posted by 5Porn0 (Member # 6001) on :

How much for the MM coil over kit?

Posted by racsirx (Member # 1710) on :

I bought this Mustang mostly in pieces and in boxes, the torque arm and panhard bar are off the car but I will need to go through all the boxes to find the hardware before I decide the price, hood will be $350, I might keep the front coil overs, I need to find time to see if they work with my Strange struts but I won't be using the coils.

Posted by Wht86drop (Member # 12104) on :

How much for the rear coilovers? And does anybody know if they will work on a irs setup?

Posted by REDLIGHTING (Member # 11296) on :

How much for k member and part number THX

Posted by racsirx (Member # 1710) on :

quote:
Originally posted by REDLIGHTING:
How much for k member and part number THX

It still on the car, never driven on, once I pull it off then I figure out price, I believe it's this one

http://www.uprproducts.com/mustang-pro-series-chrome-moly-k-member-79.html

Posted by 925_GT (Member # 11891) on :

I'm interested in the Fox to Cobra steering shaft.

[ 2013-04-02, 11:39 PM: Message edited by: 925_GT ]

Posted by 97cobra209 (Member # 11376) on :

How much for the rear lower control arms?

Posted by whiteLX26 (Member # 12399) on :

How much for the heads?

Posted by REDLIGHTING (Member # 11296) on :

Let me know on the oil pan and pickup also if its new

Posted by 91_Bimini_Coupe (Member # 11641) on :

let me know the prices for the panhard, torque arm, the CC plates,and subframe connectors whenever you figure out pricing.

Posted by 351stang (Member # 7579) on :

How much for the baterry relocation kit

Posted by jayl (Member # 185) on :

What's the bore at on that R block Lee? You got a crap load of parts on this one huh haha.

Posted by 87droptop50 (Member # 7185) on :

Pm price on the tourque arm

Posted by phildog (Member # 1214) on :

Package price on steering rack, shaft and Fidanza wheel?

Pm box is full, BTW.

Posted by 87coupe510 (Member # 6150) on :

What size are the long tube headers and how much? Let me knwo please. Thanks

Posted by 68gtscode (Member # 8679) on :

Mailbox is full.

Posted by dean-93 (Member # 9401) on :

how much for the battey relocate and 3 g alt

Posted by 64 Falcon Dan (Member # 12301) on :

Can you tell me more about the T-5 or is it a kit you have for sale? If it is a trans what is the tag part number and if you know what is the first gear ratio?

Thanks
Dan

Posted by racsirx (Member # 1710) on :

quote:
Originally posted by jayl:
What's the bore at on that R block Lee? You got a crap load of parts on this one huh haha.

I believe it's .040, yes I got a lot of parts on this one, I will try to post pics and prices later on.

Posted by jayl (Member # 185) on :

sounds like a good deal then! those guys will go .100 over with a sonic check!

Posted by BAD ASS 5.HO (Member # 10947) on :

How mutch for t5 tranny and vortech rails?

Posted by racsirx (Member # 1710) on :

quote:
Originally posted by BAD ASS 5.HO:
How mutch for t5 tranny and vortech rails?

$1200 for the Gforce T-5 but sorry, I can't find the Vortech rails right now.

Posted by racsirx (Member # 1710) on :

quote:
Originally posted by phildog:
Package price on steering rack, shaft and Fidanza wheel?

Pm box is full, BTW.

Shaft $200
Flywheel $300

Posted by racsirx (Member # 1710) on :

quote:
Originally posted by whiteLX26:
How much for the heads?

$900 for the heads with 1.7 rockers

Posted by racsirx (Member # 1710) on :

quote:
Originally posted by 87coupe510:
What size are the long tube headers and how much? Let me knwo please. Thanks

1 5/8" BBK longtubes with H-pipe, $250

[ November 12, 2012, 09:18 PM: Message edited by: racsirx ]

Posted by racsirx (Member # 1710) on :

quote:
Originally posted by 50Reasons:
.price on k member and arms once you get it off the car also want to know if it changes wheel base

You probably wouldnt like it with the SN95 arms, they push the wheels out too far.

Posted by notch_306_stang (Member # 7266) on :

How much you asking for the aluminum radiator

Posted by racsirx (Member # 1710) on :

quote:
Originally posted by notch_306_stang:
How much you asking for the aluminum radiator

Its new but it has damage, $50.

Posted by racsirx (Member # 1710) on :

quote:
Originally posted by REDLIGHTING:
Let me know on the oil pan and pickup also if its new

Oil pan is used, $250

Posted by phildog (Member # 1214) on :

Steering rack still available?

Posted by racsirx (Member # 1710) on :

quote:
Originally posted by phildog:
Steering rack still available?

Yes, I still have it.

Posted by 87droptop50 (Member # 7185) on :

How much for the headliner ?

Posted by racsirx (Member # 1710) on :

quote:
Originally posted by 87droptop50:
How much for the headliner ?

New Headliner for Convertible, $150

Posted by Wht86drop (Member # 12104) on :

Need the subframe connectors. Let me know if i can pick them up tomorrow.

Posted by fredfifty (Member # 10320) on :

is it possible to get a good pic of the top, or is it in good condition and how much are you looking to sell it for? thanks

Posted by racsirx (Member # 1710) on :

quote:
Originally posted by fredfifty:
is it possible to get a good pic of the top, or is it in good condition and how much are you looking to sell it for? thanks

The top is good shape, no holes, no tears, $300

Posted by racsirx (Member # 1710) on :

ttt

Posted by 9165pt0 (Member # 7625) on :

how much for the arm rests

Posted by racsirx (Member # 1710) on :

quote:
Originally posted by 9165pt0:
how much for the arm rests

Sorry, selling the arm rests with the door panels

Posted by racsirx (Member # 1710) on :

ttt

Posted by Arch (Member # 5177) on :

PM price on bolt in roll bar. Will it work on an 86?

Posted by racsirx (Member # 1710) on :

quote:
Originally posted by Arch:
PM price on bolt in roll bar. Will it work on an 86?

Sorry, that's been sold

Posted by racsirx (Member # 1710) on :

ttt

Posted by S V T (Member # 11387) on :

Pm interested in heads. Your pm box is full

Posted by racsirx (Member # 1710) on :

quote:
Originally posted by S V T:
Pm interested in heads. Your pm box is full

Its empty now, which ones are you looking at?

Posted by racsirx (Member # 1710) on :

ttt

Fueled by Ford Mustang Owners
on CaliforniaFords.com