This is topic Thinking about parting not 25.5 drag car in forum FOR(D) SALE: at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=102958
Posted by 1SLOWLX (Member # 558) on :
 
Long story short I Can't seem to sell a car together for the life of me.

I will not start parting it out until the body or motor sells first. Until then this car will stay together

Rolling chassis will all depend on how and what it leaves my shop with. Ie electronics fuel system and my speed wire etc.

Motor will not be taken apart sold as it sits only thing I'll take off is my nitrous plate if the new buyer doesn't want it
358 R351 4 bolt on all 5 block Yates headed NASCAR motor. Dry sump billet crank rods cp pistons yates c3 heads jesel valve train
Can be bought with or without electric water pump.
$7500obo without nitrous plate.
Thats about half of what this motor would cost to build

Rolling chassis can range anywhere from 6500-10000 depending on how it rolls out of my shop
25.5 moly cage certed to 7.5 new belts nice paint extended cowl hood upr suspension.

Sad story if there is interest I'll take it apart if not I guess it will keep collecting dust
 
Posted by SS396 chevelle aka fasthatch (Member # 7277) on :
 
pm a price on the roller with no electronics or fuel system
 
Posted by Pure Stang (Member # 7251) on :
 
You can never seem to keep a car lol.
 
Posted by Wicked Motorsports (Member # 8702) on :
 
[QUOTE]Originally posted by 1SLOWLX:
[QB] Long story short I Can't seem to sell a car together for the life of me.

I will not start parting it out until the body or motor sells first. Until then this car will stay together.

Here you go again ALBERT,I want those wheels LMK?
 
Posted by jmcclesk (Member # 1355) on :
 
i think if the car had made a pass or two then it would sell like a hot knife through butter

[ May 26, 2012, 02:12 AM: Message edited by: jmcclesk ]
 
Posted by 1SLOWLX (Member # 558) on :
 
quote:
Originally posted by jmcclesk:
i think if the car had made a pass or two then it would sell like a hot knife through butter
Good point if it doesn't sell it may visit the track shortly. Should run 8's on the bottle without a problem.
 
Posted by 1SLOWLX (Member # 558) on :
 
quote:
Originally posted by SS396 chevelle aka fasthatch:
pm a price on the roller with no electronics or fuel system
Not trying to hide anything $6500 bare chassis and wheels I'll take everything off the car!

[ May 26, 2012, 02:28 PM: Message edited by: 1SLOWLX ]
 
Posted by racsirx (Member # 1710) on :
 
I am interested in the powerglide
 
Posted by 1SLOWLX (Member # 558) on :
 


[ May 26, 2012, 02:29 PM: Message edited by: 1SLOWLX ]
 
Posted by 86foureyefifty (Member # 10856) on :
 
If u part out... How much for the speedwire system? And nitrous set up?
 
Posted by 1SLOWLX (Member # 558) on :
 
I'll figure out the prices once the car or motor sells until then nothing is for sale
 
Posted by 89bluenotch (Member # 7454) on :
 
quote:
Originally posted by Pure Stang:
You can never seem to keep a car lol.
You go through some cars too! Lol
 
Posted by 1SLOWLX (Member # 558) on :
 
quote:
Originally posted by 89bluenotch:
quote:
Originally posted by Pure Stang:
You can never seem to keep a car lol.
You go through some cars too! Lol
[Smile] . I'm never happy and get bored of them. Just like women!
 
Posted by 89bluenotch (Member # 7454) on :
 
Like my pops always says! "doesn't have to be better... Just different" lol good luck with the sale
 
Posted by Notch1320 (Member # 2647) on :
 
quote:
Originally posted by 1SLOWLX:
quote:
Originally posted by 89bluenotch:
quote:
Originally posted by Pure Stang:
You can never seem to keep a car lol.
You go through some cars too! Lol
[Smile] . I'm never happy and get bored of them. Just like women!
But...you rarely ever drive/race/enjoy your cars.... does the same apply to the women in any way? LOL

I hope not because I have seen you cut up a bunch of cars....
 
Posted by 1SLOWLX (Member # 558) on :
 
quote:
Originally posted by Notch1320:
quote:
Originally posted by 1SLOWLX:
quote:
Originally posted by 89bluenotch:
quote:
Originally posted by Pure Stang:
You can never seem to keep a car lol.
You go through some cars too! Lol
[Smile] . I'm never happy and get bored of them. Just like women!
But...you rarely ever drive/race/enjoy your cars.... does the same apply to the women in any way? LOL

I hope not because I have seen you cut up a bunch of cars....
Lmao. No no. I may enjoy this one a few times before I sell it. Alright back to the subject!
 
Posted by jmcclesk (Member # 1355) on :
 
9k as it sits [Wink] [Wink] [Razz] [patriot]
 
Posted by 1SLOWLX (Member # 558) on :
 
quote:
Originally posted by jmcclesk:
9k as it sits [Wink] [Wink] [Razz] [patriot]
Hahahaha I rather hit the wall with it [Razz]
 
Posted by jmcclesk (Member # 1355) on :
 
I know [patriot] . if you ever take that thing out call me i would like to see it run. That may loosen up the bank account.

[ May 28, 2012, 01:01 AM: Message edited by: jmcclesk ]
 
Posted by 1SLOWLX (Member # 558) on :
 
Roller may have sold.
Ttt bad ass motor will be for sale shortly !
 
Posted by 1SLOWLX (Member # 558) on :
 
Ttt
 
Posted by pbaler1 (Member # 8422) on :
 
i remember when this car was posted on here a while back for sale a guy was selling it for his friend who got divorced.. and the car was up for 10 obo and that she had no idea what it was worth what u pay for the car like 7000
 
Posted by SS396 chevelle aka fasthatch (Member # 7277) on :
 
quote:
Originally posted by pbaler1:
i remember when this car was posted on here a while back for sale a guy was selling it for his friend who got divorced.. and the car was up for 10 obo and that she had no idea what it was worth what u pay for the car like 7000
Tbogsxr6
¯
Member # 10619

posted January 31, 2011 11:04 AM
--------------------------------------------------------------------------------
1989 Mustang built to drag race.
Has a roll cage was built to be 25.5 legal which is good down to a 7.50. Engine is a 358 Yates NASCAR motor, billet crank, SVO block, all five mains are four bolted, Carrillo rods, CP pistons, roller valve train, powerhouse trains 8.8 gear with 4:10 pro gears, strange spool and 35 spline axles with all UPR suspension. Nitrous also installed. Also has a parachute installed.

I'm helping a friend sale this car, she won it in the divorce so she wants to sell it to piss of the ex. She is asking $20000. OBO

I have pic so email me if you want to see them.

--------------------
 
Posted by 1SLOWLX (Member # 558) on :
 
quote:
Originally posted by pbaler1:
i remember when this car was posted on here a while back for sale a guy was selling it for his friend who got divorced.. and the car was up for 10 obo and that she had no idea what it was worth what u pay for the car like 7000
Lol really 7k. Some people are just stupid. Why don't you get out of my post. For your info I paid a lot more than 7k and have a lot of time and money into the car since I bought it.
What was added
Maganafuel pro star 500 $450
Speed wire $1500
Now launcher $800
Speed tech 2 stage plate $950
Fuel log and regulators $500
Battery box and $150
New belts $150
Msd 7531 and matching coil $800
Throttle bracket and cable $100
Upper torque boxes $150
I'm sure I'm missing some things. I rewired most of the car because I was a mess. Had the upper torque boxes reinforced.
Honestly get out of my post I'm not asking you to buy it nor do I care if it sells. The car sits in a shop and I would think someone can put it to use
 
Posted by 1SLOWLX (Member # 558) on :
 
Ttt
 
Posted by 1SLOWLX (Member # 558) on :
 
Up we go
 
Posted by 1SLOWLX (Member # 558) on :
 
Ttt
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com