purple notch "roller" turbo,331,MM suspension,ect....

This is topic purple notch "roller" turbo,331,MM suspension,ect.... in forum FOR(D) SALE: at Northern California Ford Owners .

To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=102206

Posted by Costa510 (Member # 10978) on :

Hey everyone I'm planning on getting a house so I'm selling cafords "purple notch" for $5500 and its "NOT" complete or "RUNNING". It has alot of good new name brand parts and is almost done needs more parts and work. you can either build it or part it out or use the stuff for your car to make it one hell of a ride, and please "NO TRADES" or "low balls" and "I'M NOT PARTING OUT".... so let me start with everything its got.

Costa 510 754 0419

price as is $5500

body....
-1987 ford mustang LX coupe non CHP "clean title"
custom sonic blue paint with a purple pearl so it changes from the two
-needs new hood and have the cowling finished
-needs new windsheild has a crack in it
other then that paints nice mirror small scuffs really good paint

engine bay....
-has alot of scotts fab flush panels and its been welded up and has a rubber truck bed black coating
-wire tuck for main harness to driver side

engine....
-its a stock block thats been build and preped by angie in fremont and has about 3000 miles on it
-331 with forged crank, rods, pistons,
-all arp hardware
-185c AFR heads with bowl work
-1.6 scropion rockers
-ford racing lifters
-a polished balancer and timming cover

turbo kit....
-its a On3performance kit good kit brand new
-70mm upgrade
-44mm wastegate
-big BOV
-intercooler thick
-and blow thru maf matched with new 60lb injectors
-everythings there even down pipe to the open cut out pipe to the Y to complete your exhuast

ignition....
-full billet MSD dissy
-MSD wire
-MSD coil
-MSD 6al box
-power master altenator with relocation braket and one wire conversion
-battery relocation

fuel....
-new 60's injectors
-a 255 pump intank

suspension....
-MM suspension kit rear pan hard bar, subframes, sway bar thick, adjustable LCA, stock GT springs best one to use, everything...
-AJE tube K with A arms, koni coilovers
-Flaming river manual rack

rear end....
-stock with 5 lug and 3.55 gears

tranny....
-tremic TKO 500
-mcloed clutch
-5.0 shifter
-drive shaft unknown

cooling....
-electric water pump with plate and wiring
-fluidine radator
-FAL dual low pro fans with control box and relay
AC and heater box removed and under dash

interior....
-new black capet
-all grey panels all in great condition
-rear seat delete
-ac and raido delete

brakes....
-big corbra rotors and gt calibers
-stainless steel lines
-big rear rotors
---i say big cus they are bigger then my buddys 95 brakes and fill up the rim

exhuast....
-magnaflow cat back
stainless down pipe to all Vband cut out to Y pipe to the cat back

random....
-innovate Air fuel gague and kit new
-new speedo cable
-new tube lower radiator support
-new front bumper tube support

Needs....
it needs a good fuel system, tune, intake, engine harness, hood, door panels, 1 brake line, seats, and rims. I know if i parted out i can get my price or more cars bad all the old school guys know it just need to get it out and move on i m done with cars for awhile.

well i cant think of anything eles no i m missing things PIC's will be posted after this once i go so they will be current and shows you how it sits...... thanks for veiwing

Posted by 90GTSleeepr (Member # 9609) on :

Nice

Posted by 87CHP COUPE (Member # 11350) on :

Pics

Posted by Costa510 (Member # 10978) on :

Posted by RONIN (Member # 9987) on :

I know which Notch this is. Hasnt it been in MM&FF ? Screaming fucken deal, this will sell fast ! GL [patriot]

Posted by Costa510 (Member # 10978) on :

[IMG]http://i578.photobucket.com/albums/ss230/costa1985

[IMG]http://i578.photobucket.com/albums/ss230/costa1985/IMG_0874.jpg

Posted by Costa510 (Member # 10978) on :

Posted by Costa510 (Member # 10978) on :

ok damn that was alot i also will give you a free 200 mile tow to where you need it, and i also have my buddys like new FR500 18x9 and 18x10 with nitto all around they are super clean used to be on my car he wants $800 but if you get the car i ll make you a deal for a package

^^^^ insides still suuuuuper clean

Posted by Costa510 (Member # 10978) on :

this is how it USED to sit would be nice with a cf hood

Posted by hilltim54 (Member # 10655) on :

PM sent [patriot]

Posted by 87 coupe (Member # 10919) on :

Nice whip bro GLWS

Posted by ed's92chpstroker (Member # 10734) on :

Bad ass Notchback

Posted by 91blackonblack (Member # 11591) on :

Man if i had the money i would cash out thats the deal of the year.

Posted by Costa510 (Member # 10978) on :

SOLD!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! lol that was fast

Posted by 91blackonblack (Member # 11591) on :

Yeh real fast

Posted by 91blackonblack (Member # 11591) on :

Somebody bout to be runin [burnout]

Posted by SSF 50 (Member # 7219) on :

Damn i missed out, i been wrenchin all day, i woulda cashed out!

Posted by BAD ASS 5.HO (Member # 10947) on :

Did you sell the fr500 too?

Posted by 87coupe510 (Member # 6150) on :

Who stole this deal? Anyone on here?

Posted by JUNKYARD5.0 (Member # 10398) on :

quote:
Originally posted by hilltim54:
PM sent

Posted by jayl (Member # 185) on :

are you serious

Posted by 87coupe510 (Member # 6150) on :

quote:
Originally posted by JUNKYARD5.0:

quote:
Originally posted by hilltim54:
PM sent

Thats what i thought? but he just put up pictures of a drop lx he got.. So who knows... Maybe nobody from the board?

Posted by hilltim54 (Member # 10655) on :

No it wasent me... I was gonna make a sacrafice on this one! Somebody came up!

Fueled by Ford Mustang Owners
on CaliforniaFords.com