This is topic For Sale or Part Out 87 GT in forum FOR(D) SALE: at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=100413

---

Posted by racsirx (Member # 1710) on :
 
For Sale or Part Out 87 GT, white exterior, gray interior, 306, Tremec 3550, Edelbrock Performer heads, Crane 2040 cam same as an E303 cam, 24lb injectors, C&L 76mm mass air kit, FMS Mass Air conversion, Edelbrock shorty headers, 2.5" H-pipe with High Flow Cats, 2.5" Flowmaster American Thunder catback, 190 in tank fuel pump, BBK adjustable fuel regulator, MSD 6AL with EFI harness, MSD Blaster 2 Coil, Moroso Trunk Mount Battery Kit, Ford Racing Upgraded 130 AMP Alternator, Ford Racing high torque starter, Steeda Clutch Cable with Firewall Adjuster, Ford Motorsport Cobra clutch, 3:55 gears, Monroe GP gas struts & shocks, Central Coast G-load brace, Global West subframe connectors, Drilled front rotors, Cervini 2.5" Stormin Norman Hood with locks, Clifford alarm, Cobra upper & lower intake with BBK 65mm throttle not installed, Clean Title, $700 or I will part it out more

Cobra Intake with 65mm Throttle Body-SOLD
Front GT Bumper-SOLD
Cervini Hood-SOLD
Tremec 3550-SOLD
Edelbrock Performer Heads-SOLD
Edelbrock Headers-SOLD
Both Fenders-SOLD
BBK Adustable Fuel Regulator-SOLD
MSD 6AL-SOLD
C&L 76mm Mass Air System with 24lb Injectors-SOLD
130 AMP Alternator-SOLD
Steering Column-SOLD
Tail Lights-SOLD
Steeda Adjustable Clutch Cable-SOLD
Front Seats-SOLD
Passenger Door-SOLD
306 Shortblock-SOLD
2040 Cam-SOLD
Rear Hatch-SOLD
Steering Column-SOLD
8.8 Reareand with 3:55s-SOLD
Batter Relocation Kit-SOLD
















[ August 07, 2012, 12:21 PM: Message edited by: racsirx ]
 

---

Posted by anderthizzle (Member # 7910) on :
 
Man I tried to get this car. If you part it out I need a tranny.
 

---

Posted by s/c chp (Member # 9879) on :
 
how much 4 the hood
 

---

Posted by 88chp (Member # 10712) on :
 
how much for the edelbrock heads and wats the cc on them
 

---

Posted by FoxRider (Member # 7104) on :
 
Need both Fenders
 

---

Posted by racsirx (Member # 1710) on :
 
$300 for the hood,
$120 for the both fenders

I will have to pull the heads first so I can give specs,

[ March 27, 2012, 01:19 PM: Message edited by: racsirx ]
 

---

Posted by SSF_5.0_WARRIOR (Member # 10170) on :
 
PM Sent..
 

---

Posted by NEIGHT (Member # 8741) on :
 
If you part out I'd be interested in the heads N injectors with meter.
 

---

Posted by racsirx (Member # 1710) on :
 
It might be a week or so before before I part it out, I might have a buyer for the whole thing, but if you guys are interested in the motor or tranny and would like to hear and see how the motor and ranny works before I pull them out, you can do that anytime.

[ March 21, 2012, 01:26 PM: Message edited by: racsirx ]
 

---

Posted by 87coupe510 (Member # 6150) on :
 
Interested in the 5-speed set up if you part it. Pm me a price. thanks
 

---

Posted by anderthizzle (Member # 7910) on :
 
How much the tranny and rear end? Or do you have a rearend with 373s in it for sale?
 

---

Posted by 88chp (Member # 10712) on :
 
How much for the heads and what will it come with it
 

---

Posted by 88FOX (Member # 9969) on :
 
How much for the battery relocation kit?
 

---

Posted by 90mustang5.0 (Member # 11005) on :
 
How much without motor, tranny, and exhaust?
 

---

Posted by Swifty50 (Member # 11458) on :
 
How much for the front bumper?
 

---

Posted by racsirx (Member # 1710) on :
 
Front bumper with headlights $200 without headlights $150
Tremec 3550 with complete 5 conversion $1200
Tremec 3550 with bell housing, cross member, and driveshaft $1000
3:55 Rearend $300 but if I open the Rearend up and find an Aftermarket posi the price will go up
I also have a Rearend with 4:10s and Baer 11.65" rear disc 4 Lug $700
Moroso battery kit $60
Cervini hood $300
C&L 76mm Mass Air System with 24lb Injectors $250
Edelbrock Heads with rockers and push rods, $900-$1000 price will depending on what I find when I pull them off.

[ March 27, 2012, 01:19 PM: Message edited by: racsirx ]
 

---

Posted by racsirx (Member # 1710) on :
 

quote:

---

Originally posted by 90mustang5.0:
How much without motor, tranny, and exhaust?

---

quote:

---

Originally posted by BAD ASS 5.HO:
Price for the alternator setup with wiring?

---

$100
 

---

Posted by BAD ASS 5.HO (Member # 10947) on :
 
Pm sent
 

---

Posted by 84SVOrick (Member # 9039) on :
 
i need the driver side window motor along with driver side seat rails
 

---

Posted by jmcclesk (Member # 1355) on :
 
Tremec 3550 with complete 5 conversion $1200

3:55 Rearend $300
Edelbrock Heads with rockers and push rods, $900-$1000 price will depending on what I find when I pull them off.

package deal with and without the rearend please
pm me
 

---

Posted by racsirx (Member # 1710) on :
 
Well, I have an interested buyer in the whole thing so we will see how that goes.
 

---

Posted by bayareapits (Member # 4048) on :
 
i want the front seats
 

---

Posted by racsirx (Member # 1710) on :
 
ttt
 

---

Posted by racsirx (Member # 1710) on :
 
ttt
 

---

Posted by SSF_5.0_WARRIOR (Member # 10170) on :
 
Are you ready to part it out yet?? When you are I'm ready to go grab the stuff we spoke about via PM. I will also take those Prothane Polyurethane motor mounts you have all in the same trip. LMK
 

---

Posted by racsirx (Member # 1710) on :
 
I started parting it out last week, the front bumper has already been sold

[ April 04, 2012, 01:26 PM: Message edited by: racsirx ]
 

---

Posted by SSF_5.0_WARRIOR (Member # 10170) on :
 
Realized that after I posted. Pm me your number please..
 

---

Posted by racsirx (Member # 1710) on :
 
(925)200-9431
 

---

Posted by racsirx (Member # 1710) on :
 
ttt
 

---

Posted by racsirx (Member # 1710) on :
 
ttt
 

---

Posted by racsirx (Member # 1710) on :
 
ttt
 

---

Posted by racsirx (Member # 1710) on :
 
ttt
 

---

Posted by racsirx (Member # 1710) on :
 
ttt
 

---

Posted by racsirx (Member # 1710) on :
 
ttt
 

---

Posted by racsirx (Member # 1710) on :
 
ttt
 

---

Posted by anderthizzle (Member # 7910) on :
 
so whats left?
 

---

Posted by racsirx (Member # 1710) on :
 
It still has the Rearend with 3:55s, 2.5" catback, FMS mass air conversion, full interior, Monroe GP struts & shocks, Moroso battery relocation kit, 306 short block, drivers fender, doors, hatch, headlights, rear bumper, side skirts,
 

---

Posted by racsirx (Member # 1710) on :
 
ttt
 

---

Posted by racsirx (Member # 1710) on :
 
ttt
 

---

Posted by racsirx (Member # 1710) on :
 
ttt
 

---

Posted by racsirx (Member # 1710) on :
 
ttt
 

---

Posted by racsirx (Member # 1710) on :
 
ttt
 

---

Posted by racsirx (Member # 1710) on :
 
ttt
 

---

Posted by 86hatch (Member # 11615) on :
 
How much for the drivers side door
 

---

Posted by racsirx (Member # 1710) on :
 

quote:

---

Originally posted by 86hatch:
How much for the drivers side door

---

quote:

---

Originally posted by Slowsn94:
Do you still have the rear end w/ 355's?

---