This is topic Parting Out 91 Convertible, S-Trim, 306, HCI. in forum FOR(D) SALE: at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=097509
Posted by racsirx (Member # 1710) on :
 
Parting out 1991 Convertible LX, 5 speed, red exterior, black leather interior, 17" Chrome Cobra Rs, Vortech S-trim, C&L 73mm Mass Air Meter, 30lb injectors, Adjustable Fuel Regulator, T-Rex fuel pump, MSD 6AL, MSD Distributor, Crane Coil, Vortech Boost Retard, Autometer Phantom 5" Tach with shift light, Autometer Phantom Boost Gauge, TFS twisted wedge heads, E303 cam, Edelbrock Performer intake, BBK 70mm throttle body & EGR spacer, FMS aluminum driveshaft, 3:73 gears, Hurst Shifter, FMS headers, off road H-pipe, Flowmasters, BBK Grip upper & lower rear control arms, BBK camber caster plates, Eibach Pro Kit Springs, KYB AGX Adjustable Struts & Shocks, previous owner told us it was a DSS 306, but who knows, and it needs to be freshened up because it burns oil. Will sell what's left for $1000

Complete Black Interior-SOLD
E303 Cam-SOLD
LX Front Nose-SOLD
Vortech S-trim with Trex pump, without boost retard, without boost gauge-SOLD
5 Speed Conversion with aluminum driveshaft and Hurst shifter- SOLD
LX Tail Lights- SOLD
17" Chrome Cobra Rs-SOLD
Eibach Pro Kit Springs-SOLD
Rear Trunk Lid-SOLD
MSD Distributor-SOLD
Both Fenders-SOLD
BBK Upper & Lower Rear Control Arms-SOLD
BBK Camber Caster Plates-SOLD
KYB AGX Adjustable Struts & Shocks-SOLD
Passenger Door-SOLD
Clutch Fan-SOLD
FMS Ceramic Headers-SOLD
Flowmasters with LX Tailpipes-SOLD
Off Road H-pipe-SOLD
Rearend with 3:73 Gears-SOLD
30lb Injectors and 73mm Mass Air Meter-SOLD
Hood-SOLD
MSD 6AL-SOLD
Edelbrock Performer Intake-SOLD
BBK 70mm Throttle Body & EGR-SOLD
-
-
-
-
-
-
-
-
-
-
-

-

-

[ March 23, 2012, 08:30 PM: Message edited by: racsirx ]
 
Posted by WAR189 (Member # 11072) on :
 
How much for cobras
 
Posted by x93chp (Member # 6046) on :
 
how much for trany and bellhousing?
 
Posted by racsirx (Member # 1710) on :
 
quote:
Originally posted by WAR189:
How much for cobras
$500 for the Cobras
 
Posted by racsirx (Member # 1710) on :
 
quote:
Originally posted by x93chp:
how much for trany and bellhousing?
Sorry, I already have a pending deal with the whole 5 speed conversion.
 
Posted by wht2000gt (Member # 10127) on :
 
How much for the heads and cam? Do the heads also need to be freshened up?
 
Posted by BAD ASS 5.HO (Member # 10947) on :
 
How much for the almnm drive shaft gauges witg tach and controll arms?

[ January 17, 2012, 08:50 AM: Message edited by: BAD ASS 5.HO ]
 
Posted by GOT 50 (Member # 1960) on :
 
Pictures of teh car and best price you can do on it. Clean title? Currently runs?

Thanks,

Eric
 
Posted by king_jays_50 (Member # 9513) on :
 
how much do u want 4 the rear end??
 
Posted by primeredbeast89dropgt (Member # 10102) on :
 
Pics and price of interior looking for door panels, also is this a 4 lug car or 5 lug swap, looking for a stock passenger spindle if willing to sell and how much?
 
Posted by racsirx (Member # 1710) on :
 
quote:
Originally posted by GOT 50:
Pictures of teh car and best price you can do on it. Clean title? Currently runs?

Thanks,

Eric
I will post pics later, price is up in the air, let's see how it does on eBay, clean title, currently runs and drives.
 
Posted by racsirx (Member # 1710) on :
 
quote:
Originally posted by king_jays_50:
how much do u want 4 the rear end??
$300 for the rearend
 
Posted by racsirx (Member # 1710) on :
 
quote:
Originally posted by primeredbeast89dropgt:
Pics and price of interior looking for door panels, also is this a 4 lug car or 5 lug swap, looking for a stock passenger spindle if willing to sell and how much?
I might some interested in buying the whole interior, sorry, it's a 4 lug car
 
Posted by RONIN (Member # 9987) on :
 
I thought you wanted 5K for it as it is...?
 
Posted by 1sickEXchp1988 (Member # 11451) on :
 
if you go with parting it out id like to get the door panels
 
Posted by racsirx (Member # 1710) on :
 
quote:
Originally posted by RONIN:
I thought you wanted 5K for it as it is...?
I did but I changed my mind, it might be worth more in pieces than as a whole

[ January 17, 2012, 11:48 AM: Message edited by: racsirx ]
 
Posted by RONIN (Member # 9987) on :
 
quote:
Originally posted by racsirx:
quote:
Originally posted by RONIN:
I thought you wanted 5K for it as it is...?
I did but I changed my mind, it might be worth more in pieces than as a whole
Right on , either way it'd be a good deal . For 6k a fox that has H/C/I and a blower you can't go wrong.

GLWS sir [patriot]
 
Posted by primeredbeast89dropgt (Member # 10102) on :
 
Okae cool well if no one falls thru on those door panels let me know and would u want too sell the passenger side spindle? Glws bro
 
Posted by East Bay 50 (Member # 8081) on :
 
Is the S trim kit complete? If so how much?
 
Posted by racsirx (Member # 1710) on :
 
quote:
Originally posted by East Bay 50:
Is the S trim kit complete? If so how much?
Hey Sexy, does it look complete to you? I thought you were coming over Sunday what happened?
 
Posted by East Bay 50 (Member # 8081) on :
 
quote:
Originally posted by racsirx:
quote:
Originally posted by East Bay 50:
Is the S trim kit complete? If so how much?
Hey Sexy, does it look complete to you? I thought you were coming over Sunday what happened?
Family shit came up, Im gonna try and swing by this week though. I'll hit u up after work. shoot me a price for the blower.
 
Posted by NEIGHT (Member # 8741) on :
 
How many pounds of boost? Price?
 
Posted by SF_GT_88 (Member # 10883) on :
 
how much for the msd and blower
 
Posted by COPFITY (Member # 1845) on :
 
lee, price for front bumper, driver fender, throttle body and the alum driveshaft.

text me

thanx [patriot]
 
Posted by SF_GT_88 (Member # 10883) on :
 
how much for the msd and blower
 
Posted by 25th coupe (Member # 9743) on :
 
Price on fmu and inline fuel pump please
 
Posted by SUMO (Member # 8553) on :
 
how much for the eibach pro kit springs
 
Posted by x93chp (Member # 6046) on :
 
how much for both fanders? tail pipes?
 
Posted by racsirx (Member # 1710) on :
 
Well, I put it on eBay, if it doesn't sell then I will start parting it out
 
Posted by Bent70 (Member # 9694) on :
 
Could you shoot me a price for complete motor, fuel system and supercharger if you part?
 
Posted by racsirx (Member # 1710) on :
 
If I do part it, here are some prices

TFS heads with rockers and pushrods-$1000
Edelbrock Performer intake-$350
70mm throttle body & EGR- $150
E303 cam-$100
Complete Vortech S-trim kit with 2.95 pulley, 30lb injectors, C&L 73mm Mass Air Meter, Vortech Boost Retard, MSD 6AL, Crane Coil, T-Rex pump, Boost Gauge and Pod-$1800

LX Front Nose without lights-$100 with lights-$140

Each fender-$60

Complete 5 Speed Conversion with Hurst Shifter, Centerforce clutch, FMS aluminum driveshaft-$800 Pending Sale

LX Tailpipes with Flowmasters-$140

Eibach Pro Kit Springs-$140

[ February 22, 2012, 08:42 PM: Message edited by: racsirx ]
 
Posted by GOT 50 (Member # 1960) on :
 
I hate to see someone else buy it when I want it but here you go.

http://cgi.ebay.com/ebaymotors/1991-Mustang-Convertible-306-Vortech-Supercharger-/140684132700?pt=US_Cars_Trucks&hash=item20c16d815c
 
Posted by East Bay 50 (Member # 8081) on :
 
quote:
Originally posted by racsirx:
If I do part it, here are some prices

306-$500
TFS heads with rockers and pushrods-$1000
Edelbrock Performer intake-$350
70mm throttle body & EGR- $150
E303 cam-$100
Complete Vortech S-trim kit with 2.95 pulley, 30lb injectors, C&L 73mm Mass Air Meter, Vortech Boost Retard, MSD 6AL, Crane Coil, T-Rex pump, Boost Gauge and Pod-$1800

LX Front Nose without lights-$100 with lights-$140

Each fender-$60

Complete 5 Speed Conversion with Hurst Shifter, Centerforce clutch, FMS aluminum driveshaft-$800 Pending Sale

LX Tailpipes with Flowmasters-$140

Eibach Pro Kit Springs-$140
Just sell me the blower kit Lee. I have "Cash in Hand" lol! help a black man out [Big Grin]
 
Posted by SSF 50 (Member # 7219) on :
 
if u do part out ill take the front bumper (no lights) 4sure, & mybe pass. door & mybe fenders, but i need the bumper
 
Posted by racsirx (Member # 1710) on :
 
ttt
 
Posted by BigBen (Member # 10594) on :
 
If it does get parted out I would like the trunklid
 
Posted by racsirx (Member # 1710) on :
 
ttt
 
Posted by racsirx (Member # 1710) on :
 
ttt
 
Posted by racsirx (Member # 1710) on :
 
ttt
 
Posted by fredfifty (Member # 10320) on :
 
pm'd
 
Posted by 408OUTLAW (Member # 7297) on :
 
how much for the top
 
Posted by racsirx (Member # 1710) on :
 
Sorry the top has some tears and I think one of the brackets are broken.
 
Posted by racsirx (Member # 1710) on :
 
ttt
 
Posted by racsirx (Member # 1710) on :
 
ttt
 
Posted by BAD ASS 5.HO (Member # 10947) on :
 
pm sent
 
Posted by racsirx (Member # 1710) on :
 
ttt
 
Posted by racsirx (Member # 1710) on :
 
ttt
 
Posted by racsirx (Member # 1710) on :
 
ttt
 
Posted by Greasy (Member # 5258) on :
 
How much for all of the mouldings (except for the door mouldings) shipped to 75034?

Thanks
Chris
 
Posted by just_another_ 91 (Member # 9317) on :
 
how much for just the 306 short block
 
Posted by fredfifty (Member # 10320) on :
 
do both quarter window motors still work? how much if so...
 
Posted by racsirx (Member # 1710) on :
 
quote:
Originally posted by Greasy:
How much for all of the mouldings (except for the door mouldings) shipped to 75034?

Thanks
Chris
Sorry I already the moldings sold already
 
Posted by racsirx (Member # 1710) on :
 
quote:
Originally posted by just_another_ 91:
how much for just the 306 short block
I have three 306 short blocks from $600 to $1600
 
Posted by racsirx (Member # 1710) on :
 
quote:
Originally posted by fredfifty:
do both quarter window motors still work? how much if so...
Yes, I do, $20 for the pair.
 
Posted by 9165pt0 (Member # 7625) on :
 
top pistons, passenger top latch?
 
Posted by racsirx (Member # 1710) on :
 
quote:
Originally posted by 9165pt0:
top pistons, passenger top latch?
$100 for top pistons, $20 for the latch if I can get it off.
 
Posted by norcalfiddy (Member # 11207) on :
 
did this car have hardened pushrods?
 
Posted by racsirx (Member # 1710) on :
 
quote:
Originally posted by norcalfiddy:
did this car have hardened pushrods?
Yes, but they will be sold with the TFS heads, and they are probably too long for you unless you are running TFS heads, 6.75"
 
Posted by norcalfiddy (Member # 11207) on :
 
quote:
Originally posted by racsirx:
quote:
Originally posted by norcalfiddy:
did this car have hardened pushrods?
Yes, but they will be sold with the TFS heads, and they are probably too long for you unless you are running TFS heads, 6.75"
oh ok, yea im just running gt40p's. im looking for stock legth. thanks anyways.
 
Posted by racsirx (Member # 1710) on :
 
ttt
 
Posted by Marty Bo (Member # 10870) on :
 
How much for the main computer harness
 
Posted by racsirx (Member # 1710) on :
 
ttt
 
Posted by 50Reasons (Member # 6452) on :
 
How much for whole int?
 
Posted by racsirx (Member # 1710) on :
 
$500
 
Posted by racsirx (Member # 1710) on :
 
ttt
 
Posted by 50Reasons (Member # 6452) on :
 
I'm still waiting on int TTT for you
 
Posted by racsirx (Member # 1710) on :
 
Your interior is all ready to go,
 
Posted by 50Reasons (Member # 6452) on :
 
quote:
Originally posted by racsirx:
Your interior is all ready to go,
ok let me know when your heading down im off all week working on my coupe to get it ready for sat and I want those other parts also
 
Posted by racsirx (Member # 1710) on :
 
ttt
 
Posted by racsirx (Member # 1710) on :
 
ttt
 
Posted by racsirx (Member # 1710) on :
 
ttt
 
Posted by racsirx (Member # 1710) on :
 
ttt
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com