This is topic FS: 5.0 Stroker, ProCharger, harnesses, etc in forum FOR(D) SALE: at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=093735
Posted by JohnB (Member # 969) on :
 
My 93 Cobra is gone, 2012 GT replaced it. So, It's all for sale:

4.6 Stroker (5.0)-Stroker Diamond Pistons (9cc), Manley rods, Kellogg crank. Micropolished crank, plasma Mahle rings, King rod and main bearings. All in a Teskid block. $2500 for the shortblock, $3000 shipped gets in with a new set of C heads (99-01), headgaskets, and head bolts.

5.4 4v shortblock- forged Mahle pistons, forged H-beam rods, forged crank. Buyer backed out, I'm stuck with it. $1500 takes it.


ProCharger P1SC- complete with tubing, intercooler, etc...setup is for a 01-04 GT 2v. Will work on a 4v or other 2v models with a mounting plate swap. $2500 shipped

Mach1 PCM, PCM harness, and FI harness- $350 shipped

01 Cobra intake, complete- $425 shipped

60# injectors- $290 shipped

Mach 1 timing cover- $60 shipped

Lincoln Aviator intake, complete- $225 shipped

Aviator timing cover- $50 shipped

Pics available to those that are serious. Asking price INCLUDES shipping.

[ April 08, 2012, 10:18 PM: Message edited by: JohnB ]
 
Posted by dvuspny (Member # 10949) on :
 
Damn!
 
Posted by 2BlueGeeTees (Member # 4702) on :
 
John why are you selling exactly what I need when I don't have $2900 to spend! You kill me bro
 
Posted by SVTCOBRAFOREVER (Member # 4173) on :
 
What is that compression ratio set at for the short block. Also what kind of power can it hold?
 
Posted by whiteout34 (Member # 10311) on :
 
would it work if i swapped it into a 98gt? im very interested but idk how i would make it work?
Would i have to get a different pcm? txt me at 530 209 2831
 
Posted by JohnB (Member # 969) on :
 
Compression ratio would be anywhere from 9.4 to 10.7, depending on the CC of the head. It'll handle 750hp easily. Yes, it will work in a 2v, just need to make a few changes to the wiring harness.
 
Posted by Don (Member # 938) on :
 
So John, I just need a new bell, and the T56 will go right into a fox with a SBF?
 
Posted by JohnB (Member # 969) on :
 
quote:
Originally posted by Don:
So John, I just need a new bell, and the T56 will go right into a fox with a SBF?
Correct.
 
Posted by rollin5ive0 (Member # 8592) on :
 
quote:
Originally posted by JohnB:


T56- COMPLETE KIT. Brand new, NO run time. 10-spline, with good Centerforce DF clutch. Was installed, that's it. Includes Pro 5.0 shifter, handle, shift knob, and 4.6 bellhousing. From D&D, set up for Foxbody/SN with speedo cable. Includes Foxbody crossmember and aluminum DS. Clutch, pressureplate, and 8 bolt flywheel are used. $2200 takes it all.


 
Posted by rollin5ive0 (Member # 8592) on :
 
quote:
Originally posted by rollin5ive0:
quote:
Originally posted by JohnB:


T56- COMPLETE KIT. Brand new, NO run time. 10-spline, with good Centerforce DF clutch. Was installed, that's it. Includes Pro 5.0 shifter, handle, shift knob, and 4.6 bellhousing. From D&D, set up for Foxbody/SN with speedo cable. Includes Foxbody crossmember and aluminum DS. Clutch, pressureplate, and 8 bolt flywheel are used. $2200 takes it all.


still around? how much to ship to vacaville i have a customer wanting a swap [burnout]
 
Posted by Ant (Member # 7863) on :
 
Where are you located I want that 6 speed swap for my 85
 
Posted by JohnB (Member # 969) on :
 
I'm in Kansas. Shipping isn't a problem.


Bump...
 
Posted by 8NOTCH8 (Member # 4216) on :
 
johnB WHERE U BEEN? ttt
 
Posted by SVTCOBRAFOREVER (Member # 4173) on :
 
Hello, Do you still have the short block for sale?
 
Posted by JohnB (Member # 969) on :
 
Any items still posted are still for sale.
 
Posted by JohnB (Member # 969) on :
 
Listed updated!
 
Posted by JohnB (Member # 969) on :
 
.

[ April 08, 2012, 10:19 PM: Message edited by: JohnB ]
 
Posted by JohnB (Member # 969) on :
 
Bump!
 
Posted by JohnB (Member # 969) on :
 
Up
 
Posted by vortek01gt (Member # 10149) on :
 
What cc are the pistons on the 5.4 shortblock? Was it built for boost nitrous or what?
 
Posted by JohnB (Member # 969) on :
 
Bully for boost. 8.5-1cr.
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com