This is topic Mustang Performance parts --- more to come in forum FOR(D) SALE: at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=092105
Posted by Konman (Member # 10420) on :
 
I thought I should let Ford guys have first crack before posting on CL. All parts are used and in great condition unless specified as new. I will be pulling parts in the next few days.

Maximum Motorsport Parts
Fox body Panhard bar
Camber plates 79-89
Lower Control arms

Performance parts
Koni SA's non coilover type (full set)
Ploy motor mounts
Ploy Trans mount
NEW vert mounts stock type
Steeda Tri-Ax shifter
Steeda dual position quadrant
Steeda firewal clutch cable adjuster
Adjustable clutch cable
BBK non catted X-Pipe
70MM Cobra mass air
Built 8.8/Auburn posi/5 lug/SVO brakes
95 Cobra master cylinder


Factory parts

WC T-5 with Hurst short shifter
89 5.0 HO complete
Stock T-5 with short shifter
89 Dash complete w cluster
Lots of switchs for interior and dsah (just ask)


Feeler Parts
351W Roller built (turn key)10k mi
11.2
GT40 ported X heads
X Cam
GT40 ported intakes
CL Mass Air
24lbs injectors
Fox body oil pan
All Acc + Starter
Wiring harness and computer for fox body

Tub K-Member (I believe Griggs)
 
Posted by Konman (Member # 10420) on :
 
Gears in rear end are 3.73's
 
Posted by 1sickGT (Member # 9276) on :
 
Pm sent
 
Posted by 88chp (Member # 10712) on :
 
Txt me to (209)817-7749 I want some of those parts
 
Posted by FOXX5.0 (Member # 9094) on :
 
Pm sent [patriot]
 
Posted by 87droptop50 (Member # 7185) on :
 
Pm me a price on the panhard bar.
 
Posted by sj9ers (Member # 9860) on :
 
How much for the cobra master cylinder?
 
Posted by 93 interceptor (Member # 9457) on :
 
pm sent
 
Posted by clone nprogrss (Member # 10342) on :
 
pm duncan motors he's lookin for a 351 roller motor!! but he wants a virgin block,no boring dun!
 
Posted by Don (Member # 938) on :
 
How much for the T5's
 
Posted by 03Sn8k3 (Member # 8170) on :
 
price for the heads..and intake
 
Posted by Black89Gt *BlueBeast88.306* (Member # 6360) on :
 
How much for the 89 motor and how many miles?
 
Posted by JBeezy53 (Member # 3960) on :
 
quote:
Originally posted by clone nprogrss:
pm duncan motors he's lookin for a 351 roller motor!! but he wants a virgin block,no boring dun!
I'm sure he's not going to tear down his complete, built motor to sell the block that Duncan Motors is only gonna pay a max of $100 for.
 
Posted by 86 chp (Member # 9243) on :
 
hi how can i contact you interested in some parts can you contact me i work in los gatos that way i can come check the parts thanks 6504402570
 
Posted by Konman (Member # 10420) on :
 
All Maximum Motorsport parts are gone. Also, Cobra Master cyl is gone as well.
 
Posted by Konman (Member # 10420) on :
 
I can be reached at 650-793-8161


89 motor is 400 unsure about mileage but ran very well.

At this time i am not parting out the 351W.


Price of the tranny's are

$400 T5 with shifter and bellhousing
$550 WC T5 with Hurst shifter
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com