This is topic 97 Cobra Motor Parts @ misc in forum FOR(D) SALE: at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=090656
Posted by 97SnakeBite (Member # 8326) on
:
I got a ton of parts i need to get out of the garage
All parts are b/o
Alum Block - 200 (will neeed 2 be big bored .030)
Forged Crank - 175 (journals @ 2.186, mains @ 2.755-2.754)
B Cams - 150
Heads - 100 for pair 200 with cams
Valve cover - 100
Alt - 50
Oil cooler - 25
Timimg cover - 50
Stock K and arms - 50
Eibach Pro springs (front) - 100
Eibach Rear Sway bar - 100
oil pump - 50
water pump - 25
[ July 15, 2011, 12:34 PM: Message edited by: 97SnakeBite ]
Posted by VNMUZ96 (Member # 10456) on
:
Pics?
Posted by 97SnakeBite (Member # 8326) on
:
yeah i can take some when i get home
Posted by Snakerider (Member # 1736) on
:
Pm sent
Posted by 97SnakeBite (Member # 8326) on
:
quote:
Originally posted by Snakerider:
Pm sent
replied pictures sent
Posted by 70mach351 (Member # 7528) on
:
Is it a teksid block? Any damage to engine, crank, heads?
Posted by Gatlin6T9 (Member # 5646) on
:
Too bad I didn't catch this earlier... I need a block, crank, cams, oil pan, and timing cover. I'm leaving for a month tomorrow, so if you see this tonight PM me your phone number.
Posted by 97SnakeBite (Member # 8326) on
:
quote:
Originally posted by 70mach351:
Is it a teksid block? Any damage to engine, crank, heads?
no damage.. motor ran when pulled. yes its a T block
Posted by 97SnakeBite (Member # 8326) on
:
**** updated please see above ****
Posted by 97SnakeBite (Member # 8326) on
:
**** updated please see above ****
Posted by 70mach351 (Member # 7528) on
:
Is it already bored over? Why does it need to go .030 over? Very interested in heads block and crank
Posted by 97SnakeBite (Member # 8326) on
:
quote:
Originally posted by 70mach351:
Is it already bored over? Why does it need to go .030 over? Very interested in heads block and crank
when i pulled the motor i noticed it had a " authentic ford reman tag W/ s#" so to me engine was a rebuild from ford. I dont have a bore gauge but used a dial. Cant rememeber the size.
heads are complete, crank still in the block
Posted by 95gtdrop (Member # 7478) on
:
Hey man can you send ne sone pics of the irmc and the oil cooler? Pm me for my info.
Thanks
Posted by 97SnakeBite (Member # 8326) on
:
quote:
Originally posted by 95gtdrop:
Hey man can you send ne sone pics of the irmc and the oil cooler? Pm me for my info.
Thanks
pm sent
Posted by 97SnakeBite (Member # 8326) on
:
ttt
Posted by 97SnakeBite (Member # 8326) on
:
ttt
Posted by 97SnakeBite (Member # 8326) on
:
ttt
Posted by 97SnakeBite (Member # 8326) on
:
ttt
Fueled by Ford Mustang Owners
on CaliforniaFords.com