This is topic Performance parts for fox in forum FOR(D) SALE: at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=089547

---

Posted by blkfoxbody89 (Member # 8361) on :
 
stepping up my combo soon, these parts will get your fox into the 12's at 111mph on street tires with 3.55's. Can post time slip (s) if needed, also got 24mpgs with A LIGHT FOOT. otherwise not so good.

PARTS ARE NOT READY TO SELL YET, GAUGING INTEREST and putting together a stock motor to roll around with while I make money to get proper parts for new setup.


Parts are as follows:
- 95 block stock rebuild jasper motors 2 years ago. I'll be performing a leakdown test soon.
- edelbrock performer alum heads carb eo# D-215-46
- old style performer efi upper and lower (heads and lower matched to 1262 felpro)
- b-cam
- crane cams 1.7 rr
- trick flow hardened push rods
- bbk long tubes
- bbk 70mm tb
- bbk 70mm egr
- under drive pullies
- oem looking fender well cold air
- Msd coil
- a/c delete
- holley stock looking fpr

And if you would like to go 11's I have a sleeper inner fender custom mounted fogger setup. lines are hidden inside black wire covers. No one has ever been able to find the secret weapon lol. Comes with a 10lb and/or 15lb jug (s). Bottle warmer, purge noid, psi gauge, wot switch, and msd digital window switch.

Can post pictures when I get time.

Mike,
 

---

Posted by 1sic50 (Member # 6684) on :
 
how much do you want for the fogger set up lmk
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com