This is topic Rebuilt 302 5.0 for sale with GT40P heads in forum FOR(D) SALE: at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=089383
Posted by turbo50 (Member # 6700) on
:
Budget built engine for sale.
Customer cant finish engine (finances)
Rebuilt forged piston roller motor (5.0)
New king bearings (standard)
Moly rings (standard)
Melling steel oil pump
ARP oil pump driveshaft
Engine gasket set included (what ones are used on the longblock of course)
All new engine plugs and hardware.
New double row timing set
Stock camshaft (have smog legal crane for additional monies)
1.7 crane pedestal mount rockers
Trick flow head bolts
GT40Ps with .600 lift springs (heads have 5K mile run time)
$850
Should be a hard little runner for the cost.
MOTOR IS NOT YET ASSEMBLED will build to suit
Dan
925-348-1534
[ June 09, 2011, 05:34 PM: Message edited by: turbo50 ]
Posted by 89highway (Member # 10540) on
:
picture will help. ![[Razz]](tongue.gif)
Posted by turbo50 (Member # 6700) on
:
quote:
Originally posted by 89highway:
picture will help.
The motor is not yet assembled as in the ad.
A picture wont do any good.
Parts is parts doggy.
Dan
Posted by hilltim54 (Member # 10655) on
:
What work has been done to the heads??
Posted by MACKANGEL (Member # 10461) on
:
[ June 07, 2011, 03:22 AM: Message edited by: MACKANGEL ]
Posted by turbo50 (Member # 6700) on
:
quote:
Originally posted by hilltim54:
What work has been done to the heads??
5 angle valve job, new seals and .600 lift springs with new retainers/keepers.
Dan
Posted by turbo50 (Member # 6700) on
:
Man, so many requests for pictures you would think its a set of tig ole bitties!
Anyway this is EXACTLY what it will look like. It isnt assembled yet, just tryin to line up a buyer in case they want the rings gapped differently or want me to slide a bumpstick into it etc etc.
Posted by MikeD. (Member # 8060) on
:
You know someones gonna make them self look like a jack ass and tell you that those are just gt40s and not P's. Let see how many people actually read what you wrote.
Good deal though, and you can definitely trust Dan on putting together right!
Posted by turbo50 (Member # 6700) on
:
quote:
Originally posted by MikeD.:
You know someones gonna make them self look like a jack ass and tell you that those are just gt40s and not P's. Let see how many people actually read what you wrote.
Good deal though, and you can definitely trust Dan on putting together right!
From my experience folks like that which nit pick down to that level dont come through 99.97% of the time.
Difference in being picky and asking intelligent questions......
Posted by STANGBOY (Member # 7868) on
:
hey those look like gt40s
Posted by turbo50 (Member # 6700) on
:
quote:
Originally posted by STANGBOY:
hey those look like gt40s
They are actually TFS HIGH PORTS!!!!
Posted by turbo50 (Member # 6700) on
:
quote:
Originally posted by turbo50:
quote:
Originally posted by STANGBOY:
hey those look like gt40s
They are actually TFS HIGH PORTS!!!!
............and I was jokin........
Posted by SIC9250 (Member # 8216) on
:
Bump for ya Dan,i can say from personal experience your a badass dude to deal with,very fast response's,"real" advice and not what i "wanted" to hear,also has great prices and cuts the bullshit out...for the first time in a year i feel very confident in the setup im going to be running in my notch,just a little 302 bored .040" with speed pro hypers,nothing extreme but simple enough for a budget and will go mid 12 easy with my heads,cam,bolt-ons,etc....Thanks again for everything you got my vote ![[patriot]](graemlins/patriot.gif)
Posted by djjstylz (Member # 10957) on
:
Do you have clean blocks, machined and ready to build? I will be needing one sometime soon, probably something ready for a 347 stroker kit.
Posted by turbo50 (Member # 6700) on
:
quote:
Originally posted by djjstylz:
Do you have clean blocks, machined and ready to build? I will be needing one sometime soon, probably something ready for a 347 stroker kit.
No but summit sells them ready to go clearanced and machined for 670 to your door.
Dan
Posted by djjstylz (Member # 10957) on
:
Ok thanks!
Posted by 03smknsvt (Member # 5514) on
:
Still got it?
Posted by wilit (Member # 3367) on
:
quote:
Originally posted by turbo50:
Man, so many requests for pictures you would think its a set of tig ole bitties!
Pics?
Posted by turbo50 (Member # 6700) on
:
quote:
Originally posted by 03smknsvt:
Still got it?
yes
Posted by turbo50 (Member # 6700) on
:
TTT
[ June 09, 2011, 05:35 PM: Message edited by: turbo50 ]
Posted by 03smknsvt (Member # 5514) on
:
let me know if you still got it...i want to buy it
Posted by turbo50 (Member # 6700) on
:
TTT
Fueled by Ford Mustang Owners
on CaliforniaFords.com