This is topic sn95 ready for LS1 or LS2 motor in forum FOR(D) SALE: at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=087162
Posted by jaybone (Member # 9326) on :
 
I have a 1995 sn95 cobra car that I was making a track car. The car is completley striped and in primer with all body work completed minus the fron bumper and hood that are gone. The care has a anthiny johns k memeber that drops the motor hieght two inches and allows the ls motor to bolt up. I have the matching anthony johny billet coil overs and drop spindles. The car has no glass in it but i do have a percy plexi complete window kit for it. the car has a wolfe race craft complete cage including through the firewall suports to the strut towers on the fron and rear along with a break away side bar. all chrome molly. summit race seat mount and braced a rcj harness wolfe race craft through the interior subframe connectors and the torque boxes have been reinforced as well. the rear end has brand new 373 and a rebuikt posi all new bearings and upgraded axels with 3 inch wheel studs. chrome molly tubular upper and lower control arm kyb shocks and progressive rate springs in the back. i do have the mini tube kit for it but is not installed. all the metal work and welding was done by tolley fab in sacramento and force fed performance. I do have a fully built ls2 strocker motor for sale as well if your pockets are deep enough. believe i have almost all oth the ineterior for the inside as i was going to keep it a full interior drag car.

I am purposally not posting pics any one that is serious about the car please feel free to call me at

916-256-0928 and I would love to talk to you and possiably take you by the shop to see the car

asking 5000 obo

I spent that just on the cage and saftey equipment!
 
Posted by 2TONE (Member # 4216) on :
 
how much for the ls2 and whats it stroked too
 
Posted by jaybone (Member # 9326) on :
 
its bored an stroked to a 402 if you would like to know more about it feel free to call me and i can go over everything with you in regards to it and price. The price will be reflective to what all you want with it. on pump gas the motor only should make around 550 rear wheel. Give me a call I am still awake I would love to go over everything with you!
 
Posted by 2TONE (Member # 4216) on :
 
motor is for a friend that mite be interested,ill let him know and if he is interested il shoot yim your number
 
Posted by jaybone (Member # 9326) on :
 
sounds good
 
Posted by NEIGHT (Member # 8741) on :
 
Neta? FORD ready for a chevy motor? [Frown]
 
Posted by jaybone (Member # 9326) on :
 
bump
 
Posted by jaybone (Member # 9326) on :
 
bump
 
Posted by jaybone (Member # 9326) on :
 
ttt
 
Posted by gercolla1 (Member # 3068) on :
 
anthiny johns k member lol [Big Grin]
 
Posted by blkfoxbody89 (Member # 8361) on :
 
Seen this car in the force fed shop about a year ago, looked solid. Too bad you never finished it.
 
Posted by jaybone (Member # 9326) on :
 
Thank man it is a super solid car was trying to not cut corners and do everything rite how ever I had to close my business do to some changes in laws. And my bad about the Anthony Jones K member That even had me lmao I was pretty tired when I posted the thread.
 
Posted by jaybone (Member # 9326) on :
 
pics are available here!

http://sacramento.craigslist.org/cto/2305570245.html
 
Posted by 2TONE (Member # 4216) on :
 
ttt
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com