This is topic Parting Out RED 90 GT in forum FOR(D) SALE: at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=086878
Posted by racsirx (Member # 1710) on
:
Parting Out Red 1990 Mustang GT Hatchback, good working automatic, black interior, Eibach Pro Kit springs, upgraded struts & shocks, Maximum Motorsport camber caster plates, BBK headers, BBK H-pipe with high flow cats, LX tail lights, you can test drive before I pull out the motor or transmission.
LX Tail Lights-SOLD
Drivers Fender-SOLD
Hatch-SOLD
Front Seats-SOLD
BBK H-pipe -SOLD
Front Seats-SOLD
Doors-SOLD
Camber Caster Plates-SOLD
Struts & Shocks-SOLD
Automatic Transmission-SOLD
[ May 11, 2011, 02:38 PM: Message edited by: racsirx ]
Posted by ls1 miguel (Member # 10053) on
:
How much for the whole car?
Posted by racsirx (Member # 1710) on
:
Sorry, am not selling the whole car, I will get more in parts than if I sold it whole.
Posted by Quik351 (Member # 7859) on
:
Pic of seats.thanks
Posted by Stangpeede (Member # 10759) on
:
Can I see pictures of the interior?
Thank you.
Posted by Pittsburg Mustang Owner (Member # 6100) on
:
How much for the headers?
Posted by scoop510 (Member # 8726) on
:
Can u send me pics of the car and are you also parting out the exterior parts also?
Posted by racsirx (Member # 1710) on
:
Here is pics of my 90LX Mustang interior, I am also parting out, the 90GT interior is almost as clean as this one shown here,I try to get some pics of this one soon,

Posted by racsirx (Member # 1710) on
:
The headers seem to be in ok condition, surface rust on them, this Mustang lived next to the ocean.
Posted by 87droptop50 (Member # 7185) on
:
damn that interior looks clean... how does the rest of the car look
Posted by racsirx (Member # 1710) on
:
Yeah I hated making the 90LX, a parts car with 109K original miles but the tranny was bad and it had minor body damage, I didn't think it was worth fixing it and maybe only get $2500-$3000 with this market.
[ March 24, 2011, 12:43 AM: Message edited by: racsirx ]
Posted by VADEl2 (Member # 10332) on
:
I'm looking for passenger inner wheel plastic fender. have it?
Posted by racsirx (Member # 1710) on
:
Yes, I do have a few fender liners.
Posted by Big block 66 f100 (Member # 8867) on
:
Any black door panels
Posted by racsirx (Member # 1710) on
:
I have 5 sets of black door panels.
Posted by lucius50fox (Member # 10791) on
:
wtb interior and x pipe with cats..pm prices
Posted by racsirx (Member # 1710) on
:
ttt
Posted by cees87drop (Member # 4066) on
:
How much for the h-pipe?
Posted by SikWiditMke (Member # 9699) on
:
hows the condition of the T5? how much?
Posted by racsirx (Member # 1710) on
:
$100 for the h-pipe, this is an automatic,
Posted by DARKSHO (Member # 7446) on
:
Lee are the rear hatchback panels the same from 86 to 93 gt
Posted by racsirx (Member # 1710) on
:
They are the same from 1979 to 1993, you will to have 87-93 quarter windows to line up with 87-93 interior panels
Posted by DARKSHO (Member # 7446) on
:
Lee do you have any rear 86 gt hatch panels (grey)
Chris
Posted by Nasty Notch (Member # 8863) on
:
how much for the door pannels and a carpet if u have one????? both in black
Posted by racsirx (Member # 1710) on
:
Sorry I don't have any gray 86 interior.
I do have nice black carpet for a hatchback for $80
Posted by Nasty Notch (Member # 8863) on
:
Will the hatch carpet work. A coupe and how much for the door pannels
Posted by cees87drop (Member # 4066) on
:
New PM sent
Posted by blk96gt (Member # 9765) on
:
how much for the springs?
Posted by racsirx (Member # 1710) on
:
$100 for the springs
Posted by jlehr25 (Member # 10706) on
:
do you have a complete gt body kit from bumper rear bumper and all the skirts?? if so how much??
Posted by jlehr25 (Member # 10706) on
:
oh also do you still have the camber plates and bbk headers if so how much do you want for them
Posted by racsirx (Member # 1710) on
:
I have a GT rear bumper and side skirts but I don't have any GT front bumpers, I still have the camber caster plates and BBK headers.
[ April 28, 2011, 07:50 PM: Message edited by: racsirx ]
Posted by weksos (Member # 10802) on
:
Im looking for air conditioning stuff iu have it....plumbing to firewall and condensor etc....lmk!
Posted by racsirx (Member # 1710) on
:
I have several mustangs with a/c stuff still on them.
Posted by blkfoxbody89 (Member # 8361) on
:
Your box is full, interested in mm plates, headers, and H.
Posted by racsirx (Member # 1710) on
:
I still have the headers and camber caster plates but already sold the H-pipe.
Posted by blkfoxbody89 (Member # 8361) on
:
Oh, darn. well do you have a catted short H?
Posted by racsirx (Member # 1710) on
:
Sorry I dont
Posted by racsirx (Member # 1710) on
:
ttt
Posted by racsirx (Member # 1710) on
:
ttt
Posted by 87MclarenMustang (Member # 10695) on
:
Hey do you have a clean set of headlights?
Posted by racsirx (Member # 1710) on
:
Sorry I don't have any headlights
Posted by racsirx (Member # 1710) on
:
ttt
Posted by racsirx (Member # 1710) on
:
ttt
Posted by racsirx (Member # 1710) on
:
ttt
Posted by DIRTY SALLY (Member # 7845) on
:
pm if you have any 86gt seats or reg gt seats kinda need
Posted by 89chpcoupe (Member # 6046) on
:
Do you got stock hood? How much?
Posted by racsirx (Member # 1710) on
:
I have a stock hood for $50
Fueled by Ford Mustang Owners
on CaliforniaFords.com