This is topic Cast Iron Trick Flow High Ports in forum FOR(D) SALE: at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=084951
Posted by KevinL (Member # 2428) on :
 
I have an original set of cast iron TFS High Port heads for sell. Heads were bought new and used by me for a very short time and have been taking up space in my shop. Heads are O-ring grooved. Heads were also port matched and lightly ported. Heads are Ca emission legal and bolt right on any 5.0 liter motor. Instant cheap 40 plus HP. Chambers are 64cc's. Head have dual springs installed which are good to 550 lift. Price $700. With these heads the results speak for themselves.

kevlocke42@yahoo.com
Kevin Locke
-

[ May 18, 2012, 01:57 AM: Message edited by: KevinL ]
 
Posted by KevinL (Member # 2428) on :
 
TTT
 
Posted by OneFastHatch. (Member # 9537) on :
 
Any pics of the actual heads.
 
Posted by KevinL (Member # 2428) on :
 
Shoot me an email if you're interested in buying. Heads are same ones as those in picture. kevlocke42@yahoo.com
 
Posted by RONIN (Member # 9987) on :
 
Damn, I was just looking for a set of these. They are actually pretty damn hard to come by. If things change and I have some extra doe to play with I'll swoop these.


GLWS
 
Posted by Duncan Motors (Member # 7045) on :
 
u need special headers for these?
 
Posted by jmcclesk (Member # 1355) on :
 
duncan yes the exhaust ports are raised .500 if i rember correctly. and clean out your pm box.
 
Posted by GoldToes (Member # 9987) on :
 
quote:
Originally posted by jmcclesk:
duncan yes the exhaust ports are raised .500 if i rember correctly. and clean out your pm box.
Not according to the information above in the article, it says that they will work with all stock components.
 
Posted by jmcclesk (Member # 1355) on :
 
ok try them with the stock headers and let me know how it goes. Maybe i made a mistake. I think the exhaust ports are 3/4 of a inch higher.
 
Posted by hidnn.o.s. (Member # 1219) on :
 
Ttt
 
Posted by racsirx (Member # 1710) on :
 
Damn Kevin, you are bring back some history, I remember when you bought these back in the early 90s.
 
Posted by SWITCH 625.0 (Member # 9322) on :
 
Wow! A Flash from the Past of early 5.0 performance heads. Duncan Motors/Jmcclesk...on the subject of special headers: Kaufman,the KPI cast on the first series TFS Hi-port heads worked with Mac to develope a Fox header. Mac sold the Hi-port header in the early 90's. Any SBF shorty header will bolt up to the early Hi-ports . The Mac Hi-port headers allowed for the raised exhaust ports. They provided easy spark plug access and you could use any H-pipe without interference problems. Free Bump for some cool Vintage Fox heads.
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com