This is topic 408 longblock for sale..tfs heads..forged..$3000...pics! in forum FOR(D) SALE: at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=076347
Posted by BlownMach1 (Member # 5400) on
:
this motor is all new, never ran! i have the receipts for the rotating assembly. the crank is hawk racing 4340 forged 408w stroker crank and has not even been balanced yet,no holes drilled! the rods are hawk racing 4340 forged h-beams with chevy rod journals with arp rod bolts, the pistons are Probe srs forged with dish and tfs valve reliefs. the heads are old school aluminum TFS twisted wedge with the ferrera valves and i believe the older tfs aluminum heads come with HD valvesprings. these heads are new never ran! the rockers are Harland sharp i belive.i also will include 2 oil pans, a brand new mildon race pan for old school mustangs and a 351 fox conversion pan kit! also comes with brand new comp cams solid roller lifters with the guides on them. the motor also comes with arp main studs installed and arp head studs, a timing cover, a holley air cleaner, and a bigger carb mechanical fuel pump with -an fittings installed.
FIRST PERSON WITH $3000 CASH GETS THE WHOLE PACKAGE! THIS IS A GREAT DEAL SO I WOULD LIKE TO SELL COMPLETE BEFORE I PART IT OUT. IF I DO PART IT WILL ONLY BE AFTER THE SHORTBLOCK IS SOLD!
Posted by Notch_notch (Member # 8902) on
:
wat kind rockers? its 1.7 - 7/16..
Posted by BlownMach1 (Member # 5400) on
:
idk for sure but i think they are 1.6 and 3/8 studs but idk honestly. they may be 7/16? i never really looked at them that closely. the studs do look pretty big, ill have to make sure and look tomorrow.
[ April 07, 2010, 12:25 AM: Message edited by: BlownMach1 ]
Posted by BlownMach1 (Member # 5400) on
:
TTT....so i guess im willing to part it out if nobody buys it complete by this weekend so let me know what u guys need
Posted by BlowN67 (Member # 4229) on
:
might need the front sump pan/pick up.
anything i have for trades on short or long block?
also who assembled the shortblock?
Posted by BlownMach1 (Member # 5400) on
:
sorry john i can not accept trades at the moment. i need money for other parts i have put a deposit on and need to pay off..lol and the shortblock is only pre assembled, nothing has been torqued yet! just lubed and put together to make sure everything has clearance!
Posted by 1965FALCOON (Member # 8773) on
:
what would the compression be with those heads on the motor
Posted by BlownMach1 (Member # 5400) on
:
it should be around 9.8-1...or so. the block has been zero decked so if the pistons would have been flat top the car wouldnt run on pump gas so i had to go with a dish so it would be good on pump gas!
Fueled by Ford Mustang Owners
on CaliforniaFords.com