This is topic 1996 Cobra Blown ANYONE??? in forum FOR(D) SALE: at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=075833
Posted by venommS (Member # 7837) on
:
Just looking to see if there is any interest. I'm considering selling my 1996 Cobra. First of all it has a burned valve which needs to be replaced. The car does not pass smog because of the misfire cause by the valve. Just had the leak down to confirm all of this. It also needs a new serpintine belt because the current one is squealing. I'm looking into getting a newer cobra.
Basically it's black with saddle leather inside. I'm running a low compression MMR fully forged block and a Vortech V2-SQ aftercooled blower at about 9psi. The block has less than 1k on it. JohnB installed the block and Sean at AED did the street tune. It also has a Ford Racing aluminum driveshaft and is using a newer t-45 tranny with a cobra clutch. It would also come with the SCT tuner. I have pics but don't know how to upload them onto the board. The body has some dings ad blemishes nothing major. It also has a carbon fiber 4" cowl hood with pins. I'm firm at $6500. I'm the 2nd owner and have had it for 12 years now. No trades. Cash only. Clean title in hand. PM me if you are interested.
[ March 21, 2010, 03:21 AM: Message edited by: venommS ]
Posted by venommS (Member # 7837) on
:
TTT
Fueled by Ford Mustang Owners
on CaliforniaFords.com