This is topic 408 crank for cleavland mains and h beam rods in forum FOR(D) SALE: at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=075038
Posted by Fostang (Member # 3752) on
:
I have an extra EAGLE older 4340 4.0" stroke crank for a 351w or 351c. or you can use this crank in a stock blok with bearing spacers.
2.75 cleavland SVO mains
28oz inbalance
2.1 rod bearing size
Brand new just polished. I stepped up my game and went billet.
$400
I also have a set of SCAT rods Scat #2-351-6200-2311-927 which are Ford 351W H-beam rods made of forged 4340 Chrome steel 6.2" long, with a 2.311 journal and bushed .927 rod end and with 3/8" ARP 8740 Cap Screws
These are the ones if your building a long rod 351w. stronger and lighter than stock rods
$285
[ March 05, 2010, 12:07 PM: Message edited by: Fostang ]
Posted by Fostang (Member # 3752) on
:
ttt
Posted by Fostang (Member # 3752) on
:
ttt
Posted by 70mach351 (Member # 7528) on
:
is the crank cast or forged?
Posted by Fostang (Member # 3752) on
:
4340 = forged
Posted by 70mach351 (Member # 7528) on
:
will the crank and rods work together, what block were you going to put them in. Im looking into a man o war block right now.
Posted by Fostang (Member # 3752) on
:
No they are for different applications journal sizes are different the man o war has cleaveland maints 2.75 just like this crank
Posted by iceman302 (Member # 7180) on
:
Sal, I may be interested in the crank. Let me talk to my engine builder.
Fueled by Ford Mustang Owners
on CaliforniaFords.com