Parting Out 9 Second Coupe Turbo - Northern California Ford Owners

This is topic Parting Out 9 Second Coupe Turbo in forum FOR(D) SALE: at Northern California Ford Owners .

To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=074825

Posted by racsirx (Member # 1710) on :

Well, I hit the wall today at SAC, after a radiator let go, it has been best of 9.75@ 142 MPH, it made 531RWHP & 534RWTQ with a C4, so around 650HP at the motor, tuned by Jeff S., well I am going to be rebuilding it,here are the parts that I dont need for my new step up and are selling:

Keith Craft 306, 9:1 Compression, cemented, adjustable timing chain,stock cam retarded 4 degrees, 28oz SFI approved balancer, SFI approved 164 tooth flexplate, less than 500 miles, ran low 12s on motor when it had GT40p heads, AOD and 4:30 gears, and ran 9s, with TFS heads, C4, and turbo with this shortblock, $1600

Hogan sheet metal upper intake, ported GT40 lower manifold, 1" spacer,with Accufab 75mm throttle body & EGR spacer, $700

Master Power T70, .81 housing, recently rebuilt by Mike's Turbo in Florida, -SOLD

Walbro 255 intank fuel pump, Walbro 255 inline fuel pump, SOLD

SN95 fuel rails with Aeromotive fuel regulator, SOLD

MSD coil, $20

PMAS Mass Air Meter calibrated for 50lb injectors, 3.0", Pro Tube, blow thru, SOLD

[ April 22, 2010, 10:24 AM: Message edited by: racsirx ]

Posted by BlowN67 (Member # 4229) on :

hotside? maybe misc things..aim?

Posted by Sydewayz 24/7 (Member # 8725) on :

DAM hope ur alright sad to see it go so soon but i wanted to know if the shell is still good and wanted to know if u wanta sell it if so how much thanks

Posted by AzulAzul03 (Member # 7506) on :

how much for the entire car?

Posted by jayl (Member # 185) on :

damn lee, im very sorry to see this! at least you are ok! bolt all your stuff into my cobra! you can have it! [Smile]

Posted by BlowN67 (Member # 4229) on :

quote:
Originally posted by jayl:
damn lee, im very sorry to see this! at least you are ok! bolt all your stuff into my cobra! you can have it!

man i've been haunting u about that vert too lol

Posted by warhorse58gt (Member # 7702) on :

how much for the flaming river rack & shaft? and what about the cage also?

Posted by jayl (Member # 185) on :

quote:
Originally posted by BlowN67:

quote:
Originally posted by jayl:
damn lee, im very sorry to see this! at least you are ok! bolt all your stuff into my cobra! you can have it!
man i've been haunting u about that vert too lol

hahha i know! i still got your parts layin around if you want them! lol.

Posted by fasthatch (Member # 7277) on :

fuck selling lee let's fix it an get that 8 sec pass out of it

[ February 20, 2010, 09:26 PM: Message edited by: fasthatch ]

Posted by E's 89 COUPE (Member # 6569) on :

PM sent also how much for the rear welds.

[ February 20, 2010, 09:47 PM: Message edited by: E's 89 COUPE ]

Posted by 707vibrantcobra93 (Member # 4702) on :

Damn lee. That sux as long as ur ok. Just my two cents but put back together and keep goin man that thing is sweet. Either as long as ur ok that's all that matters

Posted by 89gt89gta (Member # 9679) on :

how much for the whole turbo kit? 510-690-5327 thanks

Posted by SPTVENM (Member # 7080) on :

why not fix it? just needs like a new bumper, and fenders, maybe hood.

Posted by racsirx (Member # 1710) on :

Well, I am going to hold off on parting it out, so far I have 3 offers for the whole Coupe, I could fix it but I think I would rather put the money and time into my GT, it will need fenders, front nose, some apron and upper & lower radiator support work, hood will need a little work, the intercooler and radiator and fan are destroyed, front two wheels are also bent.

Posted by Notch1320 (Member # 2647) on :

Keep it and fix it Lee!!!

This would be the perfect time to pull some more weight out of that thing!

Congrats on the numbers though!

Sorry to see this happen, but at least you are ok.

Give it a few days, look the car over good, and give it some thought before you sell it.

Posted by Pure Stang (Member # 7251) on :

That is sad to see. When I saw your car at the track a couple months ago i just loved it. Hate to see a car like this go

Posted by fasthatch (Member # 7277) on :

lee i am telling were going to fix we have way to much time in the car to just to get rid of it

Posted by SLPR93 (Member # 8769) on :

vote for the keep it and swap it to the gt or rebuild just my .02 cents [Frown]

Posted by STREETFIGHTER50 (Member # 2973) on :

Damn lee sucks to see this bro! Good ur allright

Posted by NavidR (Member # 3164) on :

how much for the entire car??? Have CASH IN HAND!

Posted by 2TONE (Member # 4216) on :

Keep that thing...its got potential and its a easy fix...everyone is gonna want it for free if u decide to get rid of it

Posted by 93PONY (Member # 60) on :

How much for the lower radiator hose?
The one with the 'speed hole' in it....

Posted by HaulinAss Motorsports (Member # 541) on :

DAMN Lee. I was talking to freind earlier that was at the track and he said something about a Mustang that hit the wall. He said it was Burgandy so I never even thought it was your car. Sorry to hear about this and glad you are ok

BUT, dont part that shit out and check your pms!

Posted by 50Reasons (Member # 6452) on :

Want injectors and tb if you want to part lmk

Posted by racsirx (Member # 1710) on :

Well, it seems alot of people are trying to find ways for me to keep and fix it, HaulassMaro has offered FREE parts to fix it. I am undecided right now, I had plans to finish my 800HP GT this year. So far the original owner, who will coming from Florida, has dibs on the roller.

[ February 21, 2010, 11:23 AM: Message edited by: racsirx ]

Posted by Notch_notch (Member # 8902) on :

damn sorry about your car... [Eek!]

i dont wanna hurt fox-body hurt my feelin. [Frown]

Posted by fasthatch (Member # 7277) on :

quote:
Originally posted by racsirx:
Well, it seems alot of people are trying to find ways for me to keep and fix it, HaulassMaro has offered FREE parts to fix it. I am undecided right now, I had plans to finish my 800HP GT this year. So far the original owner, who will coming from Florida, has dibs on the roller.

lee you know i am always down to help you fix it with free labor

Posted by hidnn.o.s. (Member # 1219) on :

quote:
Originally posted by racsirx:
I had plans to finish my 800HP GT this year.

That GT has been "ALMOST DONE" for the 10 years I've known you, LITTERALY!!!

Posted by 89Saleen310 (Member # 5397) on :

screw the coupe make the gt go fast

Posted by 2slow2go (Member # 9159) on :

I said this on your other post . But if you would have wrapped that radiator hose with SAMACHs turban this would have never happend

Posted by NavidR (Member # 3164) on :

Let me know how much for entire car when you decide

Posted by fasthatch (Member # 7277) on :

quote:
Originally posted by hidnn.o.s.:

quote:
Originally posted by racsirx:
I had plans to finish my 800HP GT this year.
That GT has been "ALMOST DONE" for the 10 years I've known you, LITTERALY!!!

been longer than that been almost done since high school

Posted by DARKSHO (Member # 7446) on :

Dam Lee Im glad you are alright, Fix it you know its cheeper to fix it than let it go, you know you will never get what you put in to it.

Posted by fasthatch (Member # 7277) on :

i give guys a hit if the car was in the condation it was when it went to the track it would be 13 to 15k car

Posted by 1 Bad Stang (Member # 9592) on :

I don't know you but I wouldn't sell the car just because a couple small problems like that. You can keep this, fix up the gt then when you're done with that come back to this. Just another idea [patriot]

Posted by 2Foxes2Five0Coupes (Member # 9154) on :

Fix that! Looks like you got a lot of people looking out for you. Sorry to see/hear about this GL with it... That GT is SUPER clean!

Posted by racsirx (Member # 1710) on :

Well, my GT has been put off for years, due life and responsibilities. I built the Coupe not caring about the scratches and blemishes, its a race car, but on the GT, I was building it like a show car, which takes more time and patience, which I havent had time for. But since I am not working as much as before I was going to work on this year.

Also special thanks Topnotch for offering some FREE parts to fix the Coupe, seems people are really trying to help me keep it.

I also I have got a few PMs and Voice mails asking if I am OK, I am OK, I feel better than when I got hit by the drunk driver last year, just taking it easy, I am just pissed that the Coupe is wrecked.

Posted by TOPnotch (Member # 1340) on :

Its just a car lee, it could have been much worse!!!

Let me know when you want to come grab those parts!

Posted by Notch1320 (Member # 2647) on :

Lee, I bet you would be even more pissed off if it happened to the GT.

More people should build cars like this! It is a race car... not a show car. Mine falls under this same mentality. All the little imperfections fade away with the low ET.(In most cases)It sure seems like you enjoyed this car and the persuit of that first 9 second pass, and even futher now.

I hope to see you back out in it Lee!

Posted by 95331StrimVert (Member # 6250) on :

Dump the notch. Put the running gear in another roller. Glad you are OK Lee.

"How much for the lower radiator hose?
The one with the 'speed hole' in it...." That was cold Shaun:-)

Posted by street_illegal_stang (Member # 1554) on :

I'd fix it! Espeacially if the doors open and close okay. Looks very repairable. BTW, Very impressive numbers and track et's with a stock block [worship]

Posted by foxstang (Member # 7447) on :

just fix it man my car was worse and i still fixed it. is that a one off hot side or is it from a kit?

[ February 24, 2010, 02:54 AM: Message edited by: foxstang ]

Posted by turbo50 (Member # 6700) on :

Glad you are ok but I had heard you were 5 mins after it happened. Didnt want to call and bother you during that time.

I need one rear shock and 5 lug nuts tho if you part it out.

heheee

j/k Lee

That GT is as purty as it was 10 years ago.

Posted by racsirx (Member # 1710) on :

Well, I am still debating on what to do, as of right now I am going to start to fix it, since a few people offered some serious help, I am going to see how far I can go on fixing it, before I say its not worth dealing with, parts list keeps getting bigger daily.

Posted by racsirx (Member # 1710) on :

ttt

Posted by Napastang88 (Member # 2589) on :

i am interested in the car. how much do you want for it? thanks

Posted by 5fordguy (Member # 6372) on :

sent you a pm, I'll donate full set of used but useable headlights/turn/markers for the rebuild

Posted by racsirx (Member # 1710) on :

ttt

Posted by SLPR93 (Member # 8769) on :

YOU SELLING THE C4 ?

Posted by racsirx (Member # 1710) on :

Maybe if I can find a good deal on a Glide.

Posted by SLPR93 (Member # 8769) on :

KEEP ME POSTED IM BUYING SOON [burnout]

Posted by project_stangs88 (Member # 4599) on :

selling those trick flow heads?

Posted by racsirx (Member # 1710) on :

Sorry, keeping the heads.

Posted by 95331StrimVert (Member # 6250) on :

Did you move? Drove by the other day and it looked very quiet?

Posted by phildog (Member # 1214) on :

How much is the block filled? Am I reading that right?

[ March 16, 2010, 01:15 AM: Message edited by: phildog ]

Posted by fasthatch (Member # 7277) on :

quote:
Originally posted by phildog:
How much is the block filled? Am I reading that right?

to the frezze plugs

Posted by phildog (Member # 1214) on :

Wow, that was fast. Can you run that on the street for extended periods? I don't have much experience with drag motors...

Posted by fasthatch (Member # 7277) on :

quote:
Originally posted by phildog:
Wow, that was fast. Can you run that on the street for extended periods? I don't have much experience with drag motors...

with a real big cooling system anything possable

Posted by phildog (Member # 1214) on :

I have one of those. [Big Grin]

Posted by racsirx (Member # 1710) on :

Yes, I just moved around the corner,

Posted by racsirx (Member # 1710) on :

ttt

Posted by racsirx (Member # 1710) on :

Special Thanks to Top Notch for hooking me up with some free parts.

[ March 27, 2010, 05:37 PM: Message edited by: racsirx ]

Posted by racsirx (Member # 1710) on :

ttt

Posted by FoX GT (Member # 4587) on :

sorry to inform you if you keep parting the car out I'm going to have to kick you off the 50 fastest list.

Posted by HaulinAss Motorsports (Member # 541) on :

quote:
Originally posted by FoX GT:
sorry to inform you if you keep parting the car out I'm going to have to kick you off the 50 fastest list.

Posted by FoX GT (Member # 4587) on :

quote:
Originally posted by HaulinAss Motorsports:

quote:
Originally posted by FoX GT:
sorry to inform you if you keep parting the car out I'm going to have to kick you off the 50 fastest list.

rules are rules! Even if at one time this old man was "one of the fastest on this board" [burnout]

Posted by racsirx (Member # 1710) on :

ttt

Posted by NorCalRydaz (Member # 3233) on :

quote:
Originally posted by FoX GT:

quote:
Originally posted by HaulinAss Motorsports:

quote:
Originally posted by FoX GT:
sorry to inform you if you keep parting the car out I'm going to have to kick you off the 50 fastest list.

rules are rules! Even if at one time this old man was "one of the fastest on this board"

lol

Fueled by Ford Mustang Owners
on CaliforniaFords.com