This is topic F.S FOX RACE PARTS 306,heads,intakes, cams, suspension update parts added in forum FOR(D) SALE: at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=073746
Posted by STANGSALLY76 (Member # 5342) on :
 
I have a few parts im no longer going to
need no trades cash only i can't recive pm's
so if interested just call me @916-676-3947

1.world products 200cc 2.02/1.60 64cc
w/ mild port work springs good to .600 lift
$500

2.rpm 2 upper/lower show polished
in excelent shape also w/1" spacer
sold

3.accufab 70mm t/b and spacer show polished
excelent condition
sold

4.f303 cam used great shape good for mild
street and boost
$100

5.lunati hyd roller cam 51018 used great shape perfect n/a or nitrous up to 200
$150

6.ford racing tall polished valve covers
show polished great condition
sold

7.306 short block in excelent shape
k/b hyper, pistons 0.30 stock crank, rods
redone just add your cam, heads,ect
also have all recipts very,very low miles
sold

8. qa1 tube k-member, a-arms, upr caster/camber
plates, upr coil-over kit, upr bump-steer kit,
everything is new in boxes
sold

9.auburn pro diff w/moser axles 31 spline
5lug fox length 3" studs, w/ axle bearings and seals, ford racing 4.10 grears, moser rear
support girdle this is everything you need
to build that bullet proof rear-end for your
fox mustang all parts are new in boxes
sold

10.ford racing raditor aluminum 4 row
with flex-a-lite s-blade extream and
canton aluminum over-flow can everything
is like new and in excelent shape
sold
also have chrome blue oval performance
upper and lower radiator and hoses
and steeda stainless radiator top hold-down
for $50 more.

11.canton 7qt pan with crank scraper
pick-up tube and dip stick excelent shape
sold

12.energy suspension urathane motor mounts
great shape
$50

13.jba shorty headers smog leagle little rusty
but sound good with no leaks
$40

14.power master 140amp alternator
like new
$100

15.pa comp c4 trans with reverse manual v/b
and 9.5 3500 converter with anti-balloon
plates used in great condition also sfi
shield
sold but still have 9.5" ptc converter
ill take $200 for it

16.ptc 9.5" converter for a c4 26spline
4500 stall used great condition
sold

17.march billit aluminum pulleys w/ new power steering pump with march pulley, billit a/c
delete with tensioner w/ billet pulley
excelent shape with hardware
sold

18.wieand polished water-pump in great
condition
sold

19.agx quick ratio power steering rack
also comes with urathane offset rack bushings
everthing is new
$200

20.lower race pully this is not the
standard underdrive pulley used but
great shape
$40

21.1969 302 block very hard to find
its 0.30 bore will clean up perfect @0.40
$200

22.1989 302 longblock out of 89 coupe pulled
3 weeks ago running like shit very high miles
good solid re-builder
$150

23.few set of early 289 small chamber heads
and a set of early 302 heads good rebuilders
$50/pair

if you are interested just give me a call
@916-676-3947

[ January 26, 2010, 01:21 AM: Message edited by: STANGSALLY76 ]
 
Posted by STANGSALLY76 (Member # 5342) on :
 
also forgot i also have new rear suspension

1.granatelli motorsports
weight jackers lowers w/adjustable spring perches
these are the exact same as maximum motorsports
extream duty lowers

2.double adjustable uppers

3.steeda spherical upper bushings

4.comp engeneering sub-frame connectors

everything is new in boxes ill take $400
for everything

also a set of upr rear axle tube braces
i will throw these in for $50

[ January 22, 2010, 06:53 PM: Message edited by: STANGSALLY76 ]
 
Posted by EPIK (Member # 7481) on :
 
your pm box is full
 
Posted by STANGSALLY76 (Member # 5342) on :
 
i can not recive pm's so if your interested
just call me thanks.
 
Posted by F_R_A_N_C_O_I_S (Member # 9475) on :
 
do u hav any pics of the canton 7qt pan
 
Posted by STANGSALLY76 (Member # 5342) on :
 
i have no pics its in excelent shape
its black and also tapped for a supercharger
oil return also has plug for n/a
if you need to see one check summit.
 
Posted by SHORTSHIFTER89 (Member # 7810) on :
 
pm sent
 
Posted by need-a-cage (Member # 5415) on :
 
Damn, you have a lot of stuff I want!

Who polished the intake? Is it the Performer RPM2? I know they have a polished version that they sell. Is this it or did you polish?
 
Posted by STANGSALLY76 (Member # 5342) on :
 
quote:
Originally posted by need-a-cage:
Damn, you have a lot of stuff I want!

Who polished the intake? Is it the Performer RPM2? I know they have a polished version that they sell. Is this it or did you polish?
its the RPM-2 the part #37-7120 it was polished
by edelbrock but it did not look that great
so i had it redone and now it looks way better
now.
 
Posted by STANGSALLY76 (Member # 5342) on :
 
the rear-end stuff is gone
so are the valve covers.
 
Posted by warhorse58gt (Member # 7702) on :
 
what it eh canton pan for?


11.canton 7qt pan with crank scraper
pick-up tube and dip stick excelent shape
$150
 
Posted by STANGSALLY76 (Member # 5342) on :
 
79-95 302
 
Posted by WickedStang (Member # 7692) on :
 
On our way! [dance]
 
Posted by STANGSALLY76 (Member # 5342) on :
 
front suspension and c4 trans pending sale
 
Posted by 89TRUNK (Member # 2506) on :
 
So the c4 and converters are sold?
 
Posted by need-a-cage (Member # 5415) on :
 
Do you ever come towards Santa Rosa?

I want the intake and throttlebody spacer but it will be tough to go to Sac.
 
Posted by STANGSALLY76 (Member # 5342) on :
 
quote:
Originally posted by 89TRUNK:
So the c4 and converters are sold?
i still have the 9.5 ptc 3500 ill take
$200 just need it gone.
 
Posted by STANGSALLY76 (Member # 5342) on :
 
quote:
Originally posted by need-a-cage:
Do you ever come towards Santa Rosa?

I want the intake and throttlebody spacer but it will be tough to go to Sac.
sold them this morning.
 
Posted by SHORTSHIFTER89 (Member # 7810) on :
 
Do you still have the alum rad and fan?
 
Posted by Wicked Motorsports (Member # 8702) on :
 
quote:
Originally posted by STANGSALLY76:
front suspension and c4 trans pending sale
Thanks for the stuff Lmk if anything else comes up,and let me see what I have..
 
Posted by STANGSALLY76 (Member # 5342) on :
 
sounds good
 
Posted by STANGSALLY76 (Member # 5342) on :
 
quote:
Originally posted by SHORTSHIFTER89:
Do you still have the alum rad and fan?
yes.
 
Posted by EPIK (Member # 7481) on :
 
Tried to reply to your PM about the heads last week, but your box is full....
 
Posted by STANGSALLY76 (Member # 5342) on :
 
ttt
 
Posted by SHORTSHIFTER89 (Member # 7810) on :
 
thanks stangsally for the partss [patriot]
 
Posted by Duncan Motors (Member # 7045) on :
 
im for sure getting these heads in the next couple days.
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com