This is topic Trick Flow heads, Belt drive, headers for sale in forum FOR(D) SALE: at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=071586
Posted by Forderator (Member # 6585) on :
 
This stuff all came off a 406 I bought off of (can't remember his name?) on the board. Can't use it for my app...

Trick Flow iron heads, tons of work, supposedly flow close to 300, 56cc I believe. someone spent a lot of time working these over, porting, epoxy, the whole nine yards. Just too much compression for my app.
$700

Danny Bee adjustable belt drive setup for small block, very nice.
$450

CSI electric water pump.
SOLD

Hooker full length headers for TFS-R bolt pattern (I do have the adapters for inline ports, they are on the Trick Flow irons)fox body.
$100

Solid roller cam, don't have the card but is in the .580 lift range? I'll get the specs if anyone is interested.
Make an offer..

Mike
707-372-2828

[ November 14, 2009, 08:50 PM: Message edited by: Forderator ]
 
Posted by MikeD. (Member # 8060) on :
 
Where at in Vacaville are you?
 
Posted by JohnB (Member # 969) on :
 
quote:
Originally posted by Forderator:
Hooker full length headers for TFS-R bolt pattern (I do have the adapters for inline ports, they are on the Trick Flow irons)fox body.
$100
9.2 or 9.5 block?
 
Posted by 1SLOWLX (Member # 558) on :
 
Heads are the old school iron high ports. They are suppose to flow in the 350+ range. The old owner claimed to have over 7k in the heads

John it's for a 9.5 if I remeber correctly a351 sportsman block.
 
Posted by Forderator (Member # 6585) on :
 
Hey John, it's a 9.5 A351 block. The heads have a ton of money in them for sure...
I was hoping to scrape enough together to grab those DART CNC's that are on the board, those would work nicely...
 
Posted by 1SLOWLX (Member # 558) on :
 
quote:
Originally posted by Forderator:
Hey John, it's a 9.5 A351 block. The heads have a ton of money in them for sure...
I was hoping to scrape enough together to grab those DART CNC's that are on the board, those would work nicely...
yeah thoses dart heads look great on my shelf [Wink]
 
Posted by 89TRUNK (Member # 2506) on :
 
Im interested in the cam, pm or post the specs. Do you have lifters too? Thanks
 
Posted by Forderator (Member # 6585) on :
 
If I could sell some of this stuff I could make it happen on the Dart's...
I'll get the cam specs tomorrow and post them, no lifters..
 
Posted by turbo50 (Member # 6700) on :
 
send me pictures of the heads

dans2ndgenfbody@yahoo.com


got someone interested
 
Posted by Notch1320 (Member # 2647) on :
 
Pics of the heads to Notch1320@yahoo.com
 
Posted by Forderator (Member # 6585) on :
 
Pics of the heads sent to those who wanted them.

The cam looks to be a Comp solid roller,
296B-R6, HB7305 for those interested...
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com