This is topic Edelbrock Performer Heads 300.00 in forum FOR(D) SALE: at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=069791
Posted by MikeD. (Member # 8060) on
:
2.02 Edelbrock performers. Include 3.8 studs, isky guide plates, and dual valve springs. The bad- The heads need to be heli coiled. I blew 1 plug out and the rest need to be either cleaned up or helicoiled aswell. There is a 1 boss that has a slight crack in it from the previous owner over torqueing the bolt. Its not affecting the performance of the head as of now, but may in the future if not fixed. The machine shop told me 300 to fix it. I have already spent 900 to buy them and just can't stomach putting more into them. So I wan't 300, nothing more nothing less. I don't have the heads as of now, but will pick them up tonight or tomorrow. You may be able to fix them for cheaper or free. Its your call. Please give me a call 707-365-6441. Thanks.
Posted by E's 89 coupe (Member # 6569) on
:
Ay Mike any pics of those heads and are they the older style with the eyebrow water jackets or the newer ones thanks
Posted by MikeD. (Member # 8060) on
:
Im not sure about which style they are. I have pictures give me like 30min to get home a post em up.
Posted by MikeD. (Member # 8060) on
:
Posted by MikeD. (Member # 8060) on
:
TTT ill throw in trickflow pushrods and summit 1.6 rockers for 100 more. So 400 for everything!
Posted by BlowN67 (Member # 4229) on
:
trades?
Posted by MikeD. (Member # 8060) on
:
I didnt want to but maybe trades for some cobras, or maybe a tube k memeber. IDK post up things you got. Hoods, suspension parts, intakes, nitrous, wheels, slicks stuff like that.
[ September 08, 2009, 08:30 PM: Message edited by: MikeD. ]
Posted by JohnB (Member # 969) on
:
Is it cracked from top to bottom in the bolt hole/boss? Is the crack in a water jacket? Upper or lower bolt? Were they checked on the deck surface for straightness? Lemme know, as I have someone seriously interested.
Posted by MikeD. (Member # 8060) on
:
They arent decked, I didnt have them checked to see if they were flat. They are cracked where the bolt head sits. Basically just over torqued so it crushed it. Its not all they way through just split a bit. Im sure it can be fixed, I just dont have money top do it. Ill try and get pictures. LMK, trade me a nitrous kit john..
[ September 08, 2009, 08:29 PM: Message edited by: MikeD. ]
Posted by MikeD. (Member # 8060) on
:
TTT
Posted by 2slow2go (Member # 9159) on
:
gooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo00000000000000000000000000000000000000D!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Posted by SacStangDriver (Member # 8304) on
:
i got a full compucar nitrous kit, LMK!
Posted by cali95gt (Member # 8940) on
:
I hjave some cobras and cash. lmk
Posted by turbo50 (Member # 6700) on
:
sell the heads. they are fixable. i had daves machine look at them and there is concern over the crack in the head bolt boss where the reducer washer sits, running down the boss at a later date. the heads also need 10 heli coils installed, two of them in spark plug holes. someone over torqued almost all the threads. The decks look good. One head is a runner. you could probably take them to another machine shop and have them fixed but it is not 100%.
these heads were on the new motor and running but the one spark plug hole just would not hold and the car and new motor are too nice for these heads.
Posted by MikeD. (Member # 8060) on
:
Sold..
Fueled by Ford Mustang Owners
on CaliforniaFords.com