This is topic FS: 17x8 GT wheels with tires in forum FOR(D) SALE: at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=068908

---

Posted by RRRCobraSC281 (Member # 7086) on :
 
I have a set of 4 17" wheels with tires with about 90% tread.
Used them to get my car to the painter.
Now that I got it back, it's time to make room for my new wheels.

First $200 takes them.

I can be reached at 510-299-0950 or email me at amgbenz68@yahoo.com

Robert


 

---

Posted by dubfive-0 (Member # 8965) on :
 
DAMN! project is going good so far good job
 

---

Posted by EPIK (Member # 7481) on :
 
Nice!!! Is that 03/04 Mach 1 "azure blue"??? Looks good...

HMMMM, I see mach seats in there too... bad@$$ project...

[ August 08, 2009, 02:57 AM: Message edited by: EPIK ]
 

---

Posted by RRRCobraSC281 (Member # 7086) on :
 
Yes it's the 03-04 mach blue. The picture is a little over-exposed. It looks better in person. I'm about a week or 2 from starting the engine. Actually need to mount the trans cooler and fuel tank. Still up in the air about the hood. Might end up going with heat extractor hood and scrap the ram air hood scoop idea.

Damn, I knew I shouldn't have posted this picture. I am selling some 5 lug wheels here.
 

---

Posted by EPIK (Member # 7481) on :
 

quote:

---

Originally posted by RRRCobraSC281:
Yes it's the 03-04 mach blue. The picture is a little over-exposed. It looks better in person. I'm about a week or 2 from starting the engine. Actually need to mount the trans cooler and fuel tank. Still up in the air about the hood. Might end up going with heat extractor hood and scrap the ram air hood scoop idea.

Damn, I knew I shouldn't have posted this picture. I am selling some 5 lug wheels here.

---

Well, the wheels look clean too Those are actually some of the best factory GT wheels ever made IMO... Are they the machined finish?
 

---

Posted by RRRCobraSC281 (Member # 7086) on :
 
Yes, machined finish.
 

---

Posted by 2Foxes2Five0Coupes (Member # 9154) on :
 
Car looks amazing!!! Thats a good color on a coupe first time seeing it on one. Those wheels always look good on a coupe 2
 

---

Posted by RRRCobraSC281 (Member # 7086) on :
 
Bump
 

---

Posted by RRRCobraSC281 (Member # 7086) on :
 
$160 without center caps.
 

---

Posted by 1sik01 (Member # 9362) on :
 
nice ride man i like those bullitt wheels where did you get them im trying to get a set for my stang?
 

---

Posted by LS1EATR (Member # 2702) on :
 
So thats what you have been working on lol. Looks sick. TTT
 

---

Posted by STREETFIGHTER50 (Member # 2973) on :
 
Gonna be sick when she's done! Haven't seen that color on any foxes yet. What combo u brewin up?
 

---

Posted by RRRCobraSC281 (Member # 7086) on :
 
Since the painter did a half as job on it, my enthusiasum to go all out has fizzled.

Donor was a 2004 Mach 1.

Drivetrain, and interior was swapped in.

Wheels are OE Cobra R black 18x9 and 18x10

255/35ZR18 front and 285/30ZR18 rear

Still thinking about the ram air set-up, but I'm not feeling it anymore looking at the black cowl grill. It's going to look like a "T" than a stripe down the middle.

Most likely going heat extractor hood, but for now, since money is tight, keeping the stock hood.

96 GT wheels are for sale!

[ August 14, 2009, 02:36 AM: Message edited by: RRRCobraSC281 ]
 

---

Posted by RRRCobraSC281 (Member # 7086) on :
 

quote:

---

Originally posted by 1sik01:
nice ride man i like those bullitt wheels where did you get them im trying to get a set for my stang?

---