alot of parts misc years - Northern California Ford Owners

This is topic alot of parts misc years in forum FOR(D) SALE: at Northern California Ford Owners .

To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=068777

Posted by BlowN67 (Member # 4229) on :

have a 68 block 302 no cam 40 over with k.b. silver lites. would do a quick rings an bearing to make it fresh if it was me.trade for a good roller shortblock askin $200firm

(3) explorer intakes upper/lower each$200firm

gt40 heads. $300 firm

tfs stage3 cam $125
@.50 236 int./248 exh. Lift .574/.595

was in a 400+ ci motor for nitrous
comp cam solid roller $150
FW 1842F/1960B R8
@50 279INT/286EXH
LIFT .736INT/.720EXH
LOBE SEP 108
_______________________________________________
solid roller cam motion cam was set for a 347 xx mondo r headed motor.
basically brand new degreed an then changed out for cam motion turbo cam $200
r 2723-2857-141-4

.737Int .704exh
274 Int 287exh
________________________________________________
compcam reduce base circle cam hyd roller $150
3170/315 hr112 c4991
INT EXH
.577 .576
248 252 @50
LOBE SEP 112

________________________________________________
havent spec it out yet but heres the number on cam $150

BC FW 325 331 HR12 516562

3bolt fuel regulator larger than stock like the sn95 rails$35

have some 93 cobra lens used in good shape look factory to me lenses. they have a real lite faint crack nothing major pics included $80

comp cam cca-35-772-8 Advertised Duration 286/ 292, Lift .614/ .621 SOLD

edelbrock super vic efi lower new chp style $350

aluminum driveshaft $140 firm

SVO door panels $50pair

svo gray cloth rear seat $50

89 gray tweed rear seat $25

1967 fastback new shelby tail/ endcaps $300

edelbrock performer 289 BNIB carb intake $140

parker funnelweb intake ported to 1262 $200

600cfm carb holley $175

650 carb holley $400 might use it

850 carb holley $400 now $375

66-70 long tube hedman headers 1 5/8 3" collectrs $125

mcloed twin disk 10spl clutch $550firm

misc 2.3t parts,pan,rds,pistons

v6 aode tranny 1996 $50

1996 gt long block rod knock $40 been sitting outside

svoT5 needs rebuild $50

two 15x4 aluminum 5 lug front runners/tires $100 firm tires must be aleast worth that

(1) turbine wheel w/tire $25
(1) v6 94+ wheel w/tire $25
(1) draglite 15x8 rim only $50

pm or emails for pics gonein67@aol.com 510-812-7765 txt if u want

More to come when I actually clean out an orginized the garage.

[ September 07, 2009, 12:31 AM: Message edited by: BlowN67 ]

Posted by Ty (Member # 4920) on :

which gt40 heads are they...are the cast iron or aluminum

Posted by Stangs R Us (Member # 4495) on :

cast

Posted by Ty (Member # 4920) on :

which ones are they...are they off an explorer or cobra, or straight from ford racing

Posted by BlowN67 (Member # 4229) on :

got them from my machine shop. says gt40 on them not gtp

Posted by 1989lx5.0 (Member # 3699) on :

66-70 long tube hedman headers 1 5/8 3" collectrs $125

whats the deal on these?

i need a set for my 69' fastback torino gt with a windsor based motor, got a part number? curious if they might work.

Posted by HYFLOHDS (Member # 4198) on :

can we do something for the block.

Posted by BlowN67 (Member # 4229) on :

will get the number for the headers

Dave, call my cell.