Vortech'd 5.1 COMPLETE setup, everything included!!! 526 whp setup

This is topic Vortech'd 5.1 COMPLETE setup, everything included!!! 526 whp setup in forum FOR(D) SALE: at Northern California Ford Owners .

To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=067033

Posted by 06Xrunner (Member # 6992) on :

After a LONG time of waiting to get this back on the road its now 100% functional I've decided to sell my current setup and go with one completely different... Everything will be sold together, I will not part this out for any reason. The 3.125 Pulley creates 13.5 pounds of boost and the setup makes 526hp/470tq on 91 Pump gas. The SCT programmer has 2 different tunes, one for 91 octane and the other for race gas. The car was never dynoed on race gas. The motor has about 4k miles on it, its only been supercharged for about 1k of those. Lowballers need not email me I am not hurting for money or in a rush to sell. If you are looking to spend a few grand this is not the kit for you. It's never been accurately tested in the 1/4 mile. There is over $16k just in parts here. $9000 Takes all... Here is a complete list of all the parts;

2000 GT Windsor Block
5.1L Scat stroker kit
ARP Head studs
ARP Flywheel Bolts
ARP Balancer Bolt kits
ARP Cam bolt kit (2)
ARP Mainstuds
Patriot Stage 3 heads (2v)
Comp Cams XE268H (If I remember correctly)
Canton Oil pan
Canton Windage tray
Ford Racing Oil pump
High flow water pump
SCT X2 Programmer
Dyno Tuned by AED
Vortech Mini Race bypass valve with flange
Rubber Bypass hose
Vortech V2 Supercharger kit
Vortech Aftercooler
3.125 Supercharger pulley
Custom 4in Power Pipe
Granatelli Mass Air
AEM Air Filter
Performance Products intake manifold - PORTED
Performance Products upper plenum and throttle body
60lb fuel injectors
03-04 Cobra Fuel Hat
Lincoln Aviator pumps (2)
PPRV Delete
03 Cobra Flywheel
Centerforce Dual Friction Clutch
MLS headgaskets
Energy Suspension Motor Mounts
New Belt
NGK TR6 Plugs
All 4in Silicone boots and T bolt clamps
31.5x9.5x3.5 heat exchanger

[ June 08, 2009, 07:36 AM: Message edited by: 06Xrunner ]

Posted by Stangless-n-Tx (Member # 2544) on :

Interested... hit me on PM

Posted by 9cobrasnake9 (Member # 575) on :

This is a sic setup...I am a little pissed you're selling it!!

Posted by nine1six (Member # 9012) on :

like how much are you looking to get for it?

Posted by 06Xrunner (Member # 6992) on :

ttt

Fueled by Ford Mustang Owners
on CaliforniaFords.com