This is topic 17x9/10.5 Silver Cobra R's for sale in forum FOR(D) SALE: at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=063095
Posted by Justa2V (Member # 3749) on
:
Front wheels are brand new and haven't been on the car yet, the rear wheels were test fitted for clearance issues. I would like to get back as close to what I purchased as possible which was $657 o.t.d but I will take $550 for all 4 wheels, tires not included. Serious inquiries only please. Pics will be up later today.
[ February 12, 2009, 11:17 PM: Message edited by: Justa2V ]
Posted by Justa2V (Member # 3749) on
:
There's more pics available;
Posted by 5LiterSpeeder (Member # 8234) on
:
Do you know if these would fit on a foxbody mustang with rear disk without any MAJOR clearance issues? If so i am very interested. TTT for some sicky rims
Posted by Justa2V (Member # 3749) on
:
They will work with one of 2 different ways, either way they'll stick out a bit; spacers or rolling your fenders and if you do sothe only 315 that will fit will be the Nittos, everything else will need to be a 285/40ZR17 to work. I've installed this application a couple times on foxes. Also make sure to remove your quadshock or else it'll hit.
Posted by Cobraboy (Member # 7826) on
:
quote:
Originally posted by Justa2V:
They will work with one of 2 different ways, either way they'll stick out a bit; spacers or rolling your fenders and if you do sothe only 315 that will fit will be the Nittos, everything else will need to be a 285/40ZR17 to work. I've installed this application a couple times on foxes. Also make sure to remove your quadshock or else it'll hit.
You don't need to take off the quad shock... just unbolt it, flip it around, then bolt it back up. It will clear because you will have the thinner part of the shock in the area where the tire/rim is.
Posted by 5LiterSpeeder (Member # 8234) on
:
Quad shocks are long gone.
Posted by Justa2V (Member # 3749) on
:
Solves that.
Posted by jordan_0806 (Member # 5888) on
:
quote:
Originally posted by Cobraboy:
quote:
Originally posted by Justa2V:
They will work with one of 2 different ways, either way they'll stick out a bit; spacers or rolling your fenders and if you do sothe only 315 that will fit will be the Nittos, everything else will need to be a 285/40ZR17 to work. I've installed this application a couple times on foxes. Also make sure to remove your quadshock or else it'll hit.
You don't need to take off the quad shock... just unbolt it, flip it around, then bolt it back up. It will clear because you will have the thinner part of the shock in the area where the tire/rim is.
Brock, you know nothing about foxbodies, stop posting....
Posted by Justa2V (Member # 3749) on
:
So yeah if anyone's interested, PM me the wheels are just chillin' in my garage.
Fueled by Ford Mustang Owners
on CaliforniaFords.com