This is topic ls2 notchback in forum FOR(D) SALE: at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=062472

---

Posted by eastoaklandss (Member # 8011) on :
 
testing the waters....

1989 notchback- 93,000 miles on body, 5,000 miles on swap


engine:
2007 6.0 ls2
custom comp cam
90mm fast throttle body
under drive pulley
patriot dual valve springs
comp chromoly pushrods
camaro serpentine setup

drivetrain:
2005 gto 6 speed trans
textrailia 0z700 clutch
custom 3" driveshaft with 1350 u joints
stock 95 cobra 8.8" rear

exhaust:
kooks 1-3/4 stainless long tube headers
2.5" x pipe
2.5" in/outlet magnaflow mufflers with turn downs

fuel:
-6 an fittings and braided lines
racetronix 255lph intank pump
corvette fuel filter/ regulater

suspension:
aje tubular k member
aje tubular control arms
bilstein shocks and struts
mm caster/camber plates
sn95 13" cobra brakes

wheels:
new fr500 17x9 17x10.5 wheels

interior is 9/10
exterior is 9/10

asking $13,000 obo








[ January 23, 2009, 04:50 PM: Message edited by: eastoaklandss ]
 

---

Posted by Saleenssc14 (Member # 7791) on :
 
DONT SELL IT!!!! its way too kleen
 

---

Posted by eastoaklandss (Member # 8011) on :
 
everything is for sale for the right price
 

---

Posted by S281 #314.... AKA SydeWayzSix (Member # 3596) on :
 
got pics of the engine bay? How would you smog/reg it?
 

---

Posted by slow96cobra (Member # 6001) on :
 
TRADE MY COBRA FOR IT.LOL!
 

---

Posted by eastoaklandss (Member # 8011) on :
 

quote:

---

Originally posted by S281 #314.... AKA SydeWayzSix:
got pics of the engine bay? How would you smog/reg it?

---

quote:

---

Originally posted by eastoaklandss:

quote:

---

Originally posted by S281 #314.... AKA SydeWayzSix:
got pics of the engine bay? How would you smog/reg it?

---

you have to have some type of hookup....

no trades especially not any ford trades

---

i see a sexy mach in one of those pics, TTT for a clean ass one of kind notchback...def worth the money..why you gotta say especially no ford trades tho hahaha?
 

---

Posted by WickedStang (Member # 7692) on :
 
U cant sell before we see what it does in the 1/4mile.
 

---

Posted by 427 StRoKeR SN94 (Member # 8722) on :
 

quote:

---

Originally posted by WickedStang:
U cant sell before we see what it does in the 1/4mile.

---

quote:

---

Originally posted by NavidR:
is it tuned and run nice???? Do all the guages work inside?? can we get some interior pic? might have a buyer for you?

---

fully tuned and runs perfect. 415rwhp and 390rwtq.. tuned at synergy motorsports... havent got around to doing the gauges yet...

heres the only pic of the intee i have from when it was a 4cyl


[ January 23, 2009, 09:00 PM: Message edited by: eastoaklandss ]
 

---

Posted by EXcobra/LS1NOW (Member # 8408) on :
 
Wow cant believe what I see here If I had the 13 grand I'd throw it at you in a heart beat!! Trade for my 00 camaro an cash lol probably not but let me see if I can find 13 grand on the floor and I'll call you!!!
 

---

Posted by svfreerider87 (Member # 5748) on :
 
Damn, this thing is gonna sell. that is not a bad price for that, maybe build the suspension to whatever you want to do with it but all the hard work is done, TTT for ya shaun.
 

---

Posted by STREETFIGHTER50 (Member # 2973) on :
 
this is a bad ass coupe! what ya gettin into next?
 

---

Posted by 92highway (Member # 6542) on :
 
How much just for the roller?
 

---

Posted by eastoaklandss (Member # 8011) on :
 

quote:

---

Originally posted by 92highway:
How much just for the roller?

---

i was thinkin maybe 3k for the roller with everything minus engine and tranny... ready for another lsx motor drop in...
 

---

Posted by Big block 66 f100 (Member # 8867) on :
 
clean car wrong motor

[ January 30, 2009, 03:13 AM: Message edited by: Big block 66 f100 ]
 

---

Posted by Luke87GT (Member # 21) on :
 
very cool project.

I think you may have trouble selling the car here, but I expect it to sell easily if you tossed it on ebay!

best of luck with the sale.
 

---

Posted by phil a (Member # 6951) on :
 
Wouldn't it kill you to pull at all apart and sell it as a roller after you spent so much time doing the conversion?

Nice car.
 

---

Posted by BlowN67 (Member # 4229) on :
 
Nice car.. to everyone their own..
to me its not a 13k car as is an definantly not a 3k as a roller but good luck there will be someone out there with cash an doesnt like to wrench on their own cars..
 

---

Posted by totalkaos92 (Member # 5750) on :
 
AFTER ALL THAT WORK YOU READY TO SELL IT? WAIT FOR THE SUMMER FIRST AT LEAST . YOU KNOW HOW WE DO IT. RIGHT IN FRONT ON BENS BURGER BUT IF YOU SELL IT AS A ROLLER ME AND TREETOP WILL TAKE THE BODY OFF YOUR HANDS. AND LET ME KNOW IF YOU GET RID OF THEM WHEELS TOO. BUT GOOD LUCK IN THE MEAN TIME.
 

---

Posted by GTO (Member # 6717) on :
 
Did you take it to Sacramento? What did it run in the 1/4?
 

---

Posted by 5.0-srt-4 (Member # 5864) on :
 

quote:

---

Originally posted by BlowN67:
Nice car.. to everyone their own..
to me its not a 13k car as is an definantly not a 3k as a roller but good luck there will be someone out there with cash an doesnt like to wrench on their own cars..

---

but your buddys blue lx is worth 6500? you guys crack me up

 

---

Posted by 87droptop50 (Member # 7185) on :
 
This is one swap done rite . I've seen this notch many times and is definitly worth every dollar he's asking for!
 

---

Posted by aram (Member # 3638) on :
 
I sent a pm.
 

---

Posted by asskickn88 (Member # 4957) on :
 

quote:

---

Originally posted by BlowN67:
Nice car.. to everyone their own..
to me its not a 13k car as is an definantly not a 3k as a roller but good luck there will be someone out there with cash an doesnt like to wrench on their own cars..

---

quote:

---

Originally posted by fasthatch:
do you have receipt for the engine an trans or does some take your word on them being legit

---

i dont have receipts they were all stolen parts...
 

---

Posted by fasthatch (Member # 7277) on :
 

quote:

---

Originally posted by eastoaklandss:

quote:

---

Originally posted by fasthatch:
do you have receipt for the engine an trans or does some take your word on them being legit

---

i dont have receipts they were all stolen parts...

---

quote:

---

Originally posted by BlowN67:
all installed on a 4cly not worth the money in my eyes. Dont get me wrong clean car cool build, just dont see it in the money wise.

---

So your sayin basically if he chose to build it on a original v8 body it would be worth more cuz in my eyes 4cyl or original v8 he jus switched out EVERYTHING suspension or drivetrain related that was either 4cyl and v8 jus my .02
 

---

Posted by 87droptop50 (Member # 7185) on :
 
I'd rather have a virgin 4banger shell for an lsx convsrsion than a ran though sideshow machine

Eastoaklandss who did your wiring ?

[ January 25, 2009, 07:53 AM: Message edited by: 87droptop50 ]
 

---

Posted by jordan_0806 (Member # 5888) on :
 
jesus, the people on this site....

I have had my problems with Deshaun on this site and even I think that car is well worth the money....it takes a lot of time and $$$ to do this kind of swap....and this powerplant pretty much shits on our 5.0's for durability and mod to power output...
 

---

Posted by Big block 66 f100 (Member # 8867) on :
 
thats not true our 5.0s go threw hell lets see that ls2 in about 15 years from now with about a few thousand doughnuts a couple hundred figure 8's no tellin how many burnouts race everybody in 3 towns twice our cars ride around with 150000 miles plus lets see that ls2 do that.
 

---

Posted by EPIK (Member # 7481) on :
 
Fellas!!!! Take the drama elsewhere & let the man try to sell his car....
 

---

Posted by RED@7kVERT *8850GT* (Member # 5909) on :
 
1. the cars worth $13k, no doubt about it
2. most the cars on here have stolen parts on them
3. chevy motors have always SHIT on ford motors


THREAD/


 

---

Posted by BlowN67 (Member # 4229) on :
 
PM sent I'm takin my "DRAMA" to pms
 

---

Posted by Big block 66 f100 (Member # 8867) on :
 
can i get some help here i thought this was a ford site
 

---

Posted by totalkaos92 (Member # 5750) on :
 
it is, and thats a ford
 

---

Posted by 96mysticman (Member # 8327) on :
 
wow i cant believe you only put down 415 with an ls2 i guess the body and motor dont like each other lol your shits hella clean though
 

---

Posted by SLPR93 (Member # 8769) on :
 

quote:

---

Originally posted by RED@7kVERT *8850GT*:
1. the cars worth $13k, no doubt about it
2. most the cars on here have stolen parts on them
3. chevy motors have always SHIT on ford motors


THREAD/

---

DAAAAYUM!! LS1 LOVER
1 13K 4 A SWAP NOT EVEN LEGIT AT THAT NOPE!
2 NOT ALL CAR ON HERE HAVE STOLEN PARTS OH WAIT MAYB A FEW BUT I DIDNT STEAL THEM MY SELF
3. THAT GUY DOESNT HAVE ANY RESPECT FOR FORD SO FOR A 1500 SHELL AND A 4500 MOTOR AND TRANNY 1000 FOR RIMS AN SUSPENTION AND LABOR FOR FREE CUZ NOBODY CARES HOW LONG IT TAKES U RIP OFF 100% 13K ILL BUILD SOME THING BETTER 03 COBRA MOTOR IN A 4CYL COUPE
 

---

Posted by totalkaos92 (Member # 5750) on :
 

quote:

---

Originally posted by SLPR93:

quote:

---

Originally posted by RED@7kVERT *8850GT*:
1. the cars worth $13k, no doubt about it
2. most the cars on here have stolen parts on them
3. chevy motors have always SHIT on ford motors


THREAD/

---

DAAAAYUM!! LS1 LOVER
1 13K 4 A SWAP NOT EVEN LEGIT AT THAT NOPE!
2 NOT ALL CAR ON HERE HAVE STOLEN PARTS OH WAIT MAYB A FEW BUT I DIDNT STEAL THEM MY SELF
3. THAT GUY DOESNT HAVE ANY RESPECT FOR FORD SO FOR A 1500 SHELL AND A 4500 MOTOR AND TRANNY 1000 FOR RIMS AN SUSPENTION AND LABOR FOR FREE CUZ NOBODY CARES HOW LONG IT TAKES U RIP OFF 100% 13K ILL BUILD SOME THING BETTER 03 COBRA MOTOR IN A 4CYL COUPE

---

HATER'S
 

---

Posted by Big block 66 f100 (Member # 8867) on :
 
doesnt count as a ford if it has a chev motor
 

---

Posted by EXcobra/LS1NOW (Member # 8408) on :
 

quote:

---

Originally posted by 96mysticman:
wow i cant believe you only put down 415 with an ls2 i guess the body and motor dont like each other lol your shits hella clean though

---

quote:

---

Originally posted by Big block 66 f100:
doesnt count as a ford if it has a chev motor

---

THATS WHAT THE TITLE SAYS
 

---

Posted by totalkaos92 (Member # 5750) on :
 
AND AS FAR AS SMOG, WE ALL SEE THE LONGTUBES. PUT SOME DIFFRENT EXAUST, AND GO GET A C.A.R.B NUMBER
 

---

Posted by SLPR93 (Member # 8769) on :
 
HATER FAR FROM THAT I HAVE WHAT I WANT AND GET WHAT I WANT WITH HARD WORK
 

---

Posted by Big block 66 f100 (Member # 8867) on :
 
true the car is still good the motor just needs to come out put a 5.4 dohc throw a carb on it no cam no nothin and run tens all day
 

---

Posted by eastoaklandss (Member # 8011) on :
 

quote:

---

Originally posted by SLPR93:

quote:

---

Originally posted by RED@7kVERT *8850GT*:
1. the cars worth $13k, no doubt about it
2. most the cars on here have stolen parts on them
3. chevy motors have always SHIT on ford motors


THREAD/

---

DAAAAYUM!! LS1 LOVER
1 13K 4 A SWAP NOT EVEN LEGIT AT THAT NOPE!
2 NOT ALL CAR ON HERE HAVE STOLEN PARTS OH WAIT MAYB A FEW BUT I DIDNT STEAL THEM MY SELF
3. THAT GUY DOESNT HAVE ANY RESPECT FOR FORD SO FOR A 1500 SHELL AND A 4500 MOTOR AND TRANNY 1000 FOR RIMS AN SUSPENTION AND LABOR FOR FREE CUZ NOBODY CARES HOW LONG IT TAKES U RIP OFF 100% 13K ILL BUILD SOME THING BETTER 03 COBRA MOTOR IN A 4CYL COUPE

---

damn $4500 for my motor... i can get $6500 easy for my motor and tranny combo easy just the way it sits... you must be thinkin of some old 02 ss engine...

by the way not one part is stolen on this car... all paid for with cash... NOT CREDIT

if nobody thinks the car is worth the small amount im asking for it then ill be happy and proud to keep it and have fun with it all thru summer 09 and then some...


oh yeah go get something better with an 03 cobra motor build it in 7 days like i did and come see me bout somethin...

[ January 25, 2009, 01:59 PM: Message edited by: eastoaklandss ]
 

---

Posted by RED@7kVERT *8850GT* (Member # 5909) on :
 
im a hater?? lol alrighty.....

i was giving the guy props on his clean ass coupe. its clean, not hacked and done right. whats the problem with built ford tuff with chevy stuff?? lol

dont be mad cuz his heads flow more than ported 4V's

dont be mad cuz its not slavaged

dont be mad cuz hes not rockin the shit outta primered black ponys

sounds like all the haters should stick to their fiddys and go swang a few

the car is top notch and unique. let the man sell his shit.

EOSS.... take it to ebay man. nuttin but broke dicks round here. that includes me lol



 

---

Posted by eastoaklandss (Member # 8011) on :
 
lol fasho....
 

---

Posted by Luke87GT (Member # 21) on :
 
LOL!

If anyone tries to sell a 5-liter for more than $2000 on cafords, the FOR(D) SALE hater team comes out in full force to regulate!

If you aren't seriously interested in the car, get the F out of the man's thread!

Anyone that has actually built a car from scratch knows how quickly the little pieces add up, and thats with Ford parts.

Most of us would spend well over $13K to build a car like this from scratch. Lets be real...

Eat Shit haters! The whooooooostles go wooooo wooooo!
 

---

Posted by SLPR93 (Member # 8769) on :
 

quote:

---

Originally posted by Luke87GT:
LOL!

If anyone tries to sell a 5-liter for more than $2000 on cafords, the FOR(D) SALE hater team comes out in full force to regulate!

If you aren't seriously interested in the car, get the F out of the man's thread!

Anyone that has actually built a car from scratch knows how quickly the little pieces add up, and thats with Ford parts.

Most of us would spend well over $13K to build a car like this from scratch. Lets be real...

Eat Shit haters! The whooooooostles go wooooo wooooo!

---

WELL SAID SUPER HERO AND NOBODY HATTING JMO!
 

---

Posted by 1sic03mach1 (Member # 8719) on :
 
like mysticman said only 415 to the wheels? big ass motor,cam,intake wth? its a 6.0L ls2 lets see o/r x pipe add 50rwhp to a chevy like it did to my 03 mach 371rwhp intake,exhaust,and tune (no cams)
 

---

Posted by jaejae (Member # 7958) on :
 
sell this coupe buy another and put a ls9 in it
 

---

Posted by eastoaklandss (Member # 8011) on :
 

quote:

---

Originally posted by 1sic03mach1:
like mysticman said only 415 to the wheels? big ass motor,cam,intake wth? its a 6.0L ls2 lets see o/r x pipe add 50rwhp to a chevy like it did to my 03 mach 371rwhp intake,exhaust,and tune (no cams)

---

quote:

---

Originally posted by 1sic03mach1:
like mysticman said only 415 to the wheels? big ass motor,cam,intake wth? its a 6.0L ls2 lets see o/r x pipe add 50rwhp to a chevy like it did to my 03 mach 371rwhp intake,exhaust,and tune (no cams)

---

i wanna see dyno sheet and pics of mods.im calling bs right now that isnt even close to being a believable lie
 

---

Posted by RED@7kVERT *8850GT* (Member # 5909) on :
 

quote:

---

Originally posted by 1sic03mach1:
like mysticman said only 415 to the wheels? big ass motor,cam,intake wth? its a 6.0L ls2 lets see o/r x pipe add 50rwhp to a chevy like it did to my 03 mach 371rwhp intake,exhaust,and tune (no cams)

---

quote:

---

Originally posted by 1sic03mach1:
like mysticman said only 415 to the wheels? big ass motor,cam,intake wth? its a 6.0L ls2 lets see o/r x pipe add 50rwhp to a chevy like it did to my 03 mach 371rwhp intake,exhaust,and tune (no cams)

---

quote:

---

Originally posted by gtowned.:

quote:

---

Originally posted by 1sic03mach1:
like mysticman said only 415 to the wheels? big ass motor,cam,intake wth? its a 6.0L ls2 lets see o/r x pipe add 50rwhp to a chevy like it did to my 03 mach 371rwhp intake,exhaust,and tune (no cams)

---

i wanna see dyno sheet and pics of mods.im calling bs right now that isnt even close to being a believable lie

---

quote:

---

Originally posted by eastoaklandss:

quote:

---

Originally posted by gtowned.:

quote:

---

Originally posted by 1sic03mach1:
like mysticman said only 415 to the wheels? big ass motor,cam,intake wth? its a 6.0L ls2 lets see o/r x pipe add 50rwhp to a chevy like it did to my 03 mach 371rwhp intake,exhaust,and tune (no cams)

---

i wanna see dyno sheet and pics of mods.im calling bs right now that isnt even close to being a believable lie

---

i would know being that i worked at the shop that designed the cam. and ive installed this cam into numerous cars... but ill say this.. my camaro made 0ver 600hp at the wheels.. the 415hp that you think is nothing feels like 600 in this lite ass car...

---

quote:

---

Originally posted by RED@7kVERT *8850GT*:
im a hater?? lol alrighty.....

i was giving the guy props on his clean ass coupe. its clean, not hacked and done right. whats the problem with built ford tuff with chevy stuff?? lol

dont be mad cuz his heads flow more than ported 4V's

dont be mad cuz its not slavaged

dont be mad cuz hes not rockin the shit outta primered black ponys

sounds like all the haters should stick to their fiddys and go swang a few

the car is top notch and unique. let the man sell his shit.

EOSS.... take it to ebay man. nuttin but broke dicks round here. that includes me lol

---

quote:

---

Originally posted by twins:

quote:

---

Originally posted by RED@7kVERT *8850GT*:
im a hater?? lol alrighty.....

i was giving the guy props on his clean ass coupe. its clean, not hacked and done right. whats the problem with built ford tuff with chevy stuff?? lol

dont be mad cuz his heads flow more than ported 4V's

dont be mad cuz its not slavaged

dont be mad cuz hes not rockin the shit outta primered black ponys

sounds like all the haters should stick to their fiddys and go swang a few

the car is top notch and unique. let the man sell his shit.

EOSS.... take it to ebay man. nuttin but broke dicks round here. that includes me lol

---

HIS HEADS FLOW MORE THAN 4V HEADS PORTED? WRONG!
CHANGE THE CAM ALONE AND SEE ALOT MORE POWER. GOOD BUILD, GOOD LUCK WITH THE SALE.

---

quote:

---

Originally posted by TOPnotch:

quote:

---

Originally posted by twins:

quote:

---

Originally posted by RED@7kVERT *8850GT*:
im a hater?? lol alrighty.....

i was giving the guy props on his clean ass coupe. its clean, not hacked and done right. whats the problem with built ford tuff with chevy stuff?? lol

dont be mad cuz his heads flow more than ported 4V's

dont be mad cuz its not slavaged

dont be mad cuz hes not rockin the shit outta primered black ponys

sounds like all the haters should stick to their fiddys and go swang a few

the car is top notch and unique. let the man sell his shit.

EOSS.... take it to ebay man. nuttin but broke dicks round here. that includes me lol

---

HIS HEADS FLOW MORE THAN 4V HEADS PORTED? WRONG!
CHANGE THE CAM ALONE AND SEE ALOT MORE POWER. GOOD BUILD, GOOD LUCK WITH THE SALE.

---

Twins is a fag! He doesn't know shit about cars, engines or anything for that matter. Oh but he does know how to rip people off!

This is a well put together car, not my style with the chevy thing. But to each is own! Good luck with the sale.

---

quote:

---

Originally posted by twins:

quote:

---

Originally posted by TOPnotch:

quote:

---

Originally posted by twins:

quote:

---

Originally posted by RED@7kVERT *8850GT*:
im a hater?? lol alrighty.....

i was giving the guy props on his clean ass coupe. its clean, not hacked and done right. whats the problem with built ford tuff with chevy stuff?? lol

dont be mad cuz his heads flow more than ported 4V's

dont be mad cuz its not slavaged

dont be mad cuz hes not rockin the shit outta primered black ponys

sounds like all the haters should stick to their fiddys and go swang a few

the car is top notch and unique. let the man sell his shit.

EOSS.... take it to ebay man. nuttin but broke dicks round here. that includes me lol

---

HIS HEADS FLOW MORE THAN 4V HEADS PORTED? WRONG!
CHANGE THE CAM ALONE AND SEE ALOT MORE POWER. GOOD BUILD, GOOD LUCK WITH THE SALE.

---

Twins is a fag! He doesn't know shit about cars, engines or anything for that matter. Oh but he does know how to rip people off!

This is a well put together car, not my style with the chevy thing. But to each is own! Good luck with the sale.

---

Sounds like someone needs to change their tampon!

---

quote:

---

Originally posted by FORDMAN_510:
why dont u guys stop writing these bullshit ass comments and quit hating on it if u aint going to buy it then why even write anything dont hate because u dont have a car like this or the money to buy it

---

quote:

---

Originally posted by eastoaklandss:

quote:

---

Originally posted by gtowned.:

quote:

---

Originally posted by 1sic03mach1:
like mysticman said only 415 to the wheels? big ass motor,cam,intake wth? its a 6.0L ls2 lets see o/r x pipe add 50rwhp to a chevy like it did to my 03 mach 371rwhp intake,exhaust,and tune (no cams)

---

i wanna see dyno sheet and pics of mods.im calling bs right now that isnt even close to being a believable lie

---

i would know being that i worked at the shop that designed the cam. and ive installed this cam into numerous cars... but ill say this.. my camaro made 0ver 600hp at the wheels.. the 415hp that you think is nothing feels like 600 in this lite ass car...

---

quote:

---

Originally posted by Big block 66 f100:
anybody that thinks that mach one is bs pull out your shit and some money and lets run 12.60 x pipe program and c&l went to the dino and found out the program hurt us 18 rwhp oh yea bs on you that x pipe did add 47 rwhp

---

lol @47hp
 

---

Posted by EPIK (Member # 7481) on :
 
Hey EastOaklandSS, sorry for derailing the thread, I wasnt even gonna post in here anymore, but I had to once I saw those Mach dyno numbers.

All i have to say is, I must have the weakest, most tired, beat down 50k mile Mach 1 motor around. Mine only put down 315rwhp/327rwtq with LT's, full exhaust, C&L maf, intake spacer, & a tune??? 371rwhp with only an intake,exhaust,and tune (no cams), thats amazing, but sorry bro, that sounds like inflated dyno numbers if u ask me... There is no Mach on the planet that will put down those numbers with those mods. 47hp from an x pipe??? Not even a GT500 or a Terminator will net those type of gains from an X pipe swap, even going from stock to no cats... Not trying to be a hater, or even call BS, but I think that the dyno u are running on is inaccurate or calibrated wrong...

Once again, sorry for derailing & good luck with the sale....

[ January 27, 2009, 10:01 PM: Message edited by: EPIK ]
 

---

Posted by svt306snake (Member # 1967) on :
 
bro close this thread out and start a new one so you can sell you ride
 

---

Posted by fastertoys1 (Member # 5270) on :
 
cool car but ithink your wasting your time on this website, hate to say it but you might actually have more luck on craigslist!!
Plus when's the last time any cheap ass on ca fords paid over 10k for a foxboday?
 

---

Posted by eastoaklandss (Member # 8011) on :
 

quote:

---

Originally posted by fastertoys1:
cool car but ithink your wasting your time on this website, hate to say it but you might actually have more luck on craigslist!!
Plus when's the last time any cheap ass on ca fords paid over 10k for a foxboday?

---

quote:

---

Originally posted by Luke87GT:
LOL!

If anyone tries to sell a 5-liter for more than $2000 on cafords, the FOR(D) SALE hater team comes out in full force to regulate!

If you aren't seriously interested in the car, get the F out of the man's thread!

Anyone that has actually built a car from scratch knows how quickly the little pieces add up, and thats with Ford parts.

Most of us would spend well over $13K to build a car like this from scratch. Lets be real...

Eat Shit haters! The whooooooostles go wooooo wooooo!

---

quote:

---

Originally posted by eastoaklandss:
tryin to sell now as a roller

---

put the ls2 in a oldschool...like a split bumper..lol..that would be dope as fuck..a 6 speed 71 camaro
 

---

Posted by gtowned. (Member # 8156) on :
 

quote:

---

Originally posted by Big block 66 f100:
anybody that thinks that mach one is bs pull out your shit and some money and lets run 12.60 x pipe program and c&l went to the dino and found out the program hurt us 18 rwhp oh yea bs on you that x pipe did add 47 rwhp

---

quote:

---

Originally posted by jaejae:

quote:

---

Originally posted by eastoaklandss:
tryin to sell now as a roller

---

put the ls2 in a oldschool...like a split bumper..lol..that would be dope as fuck..a 6 speed 71 camaro

---

quote:

---

Originally posted by eastoaklandss:

quote:

---

Originally posted by jaejae:

quote:

---

Originally posted by eastoaklandss:
tryin to sell now as a roller

---

put the ls2 in a oldschool...like a split bumper..lol..that would be dope as fuck..a 6 speed 71 camaro

---

im puttin my drivetrain in a 70 chevelle

---

quote:

---

Originally posted by jaejae:

quote:

---

Originally posted by eastoaklandss:
tryin to sell now as a roller

---

put the ls2 in a oldschool...like a split bumper..lol..that would be dope as fuck..a 6 speed 71 camaro

---

that would be hella clean
 

---

Posted by BlowN67 (Member # 4229) on :
 
whats the roller price?
 

---

Posted by Big block 66 f100 (Member # 8867) on :
 
hey everyone look gtowend is a internet tough guy lets all give a hand clap he just learned how to call names.
 

---

Posted by Big block 66 f100 (Member # 8867) on :
 
hey every
 

---

Posted by SIC9250 (Member # 8216) on :
 

quote:

---

Originally posted by Big block 66 f100:
anybody that thinks that mach one is bs pull out your shit and some money and lets run 12.60 x pipe program and c&l went to the dino and found out the program hurt us 18 rwhp oh yea bs on you that x pipe did add 47 rwhp

---

yes IT DID add that much with JUST an X-PIPE..i didnt believe it either till i saw the results.... i give that a +1 that was my boy steves car seen it and drove it in the low thirteens on street tires my self.... if i had enough seat time i wouldve cracked off a 12.60 too!!! ps..i was there when it did it no bullshit...basic mach..basic mods..12.60s...now the 371 rwhp idk about..but i did see it run 12.60s..

[ January 30, 2009, 02:40 AM: Message edited by: SIC9250 ]
 

---

Posted by SIC9250 (Member # 8216) on :
 

quote:

---

Originally posted by gtowned.:

quote:

---

Originally posted by Big block 66 f100:
anybody that thinks that mach one is bs pull out your shit and some money and lets run 12.60 x pipe program and c&l went to the dino and found out the program hurt us 18 rwhp oh yea bs on you that x pipe did add 47 rwhp

---

youre a fuckin idiot.i owned the fatsest n/a mach on these boards you dipshit.i will put my money down you fucking fag

---

ouch justin...that hurt me lol! i wanna see this race for real!! no bull shit!!! ill let yall use my bigs n littles too
 

---

Posted by gtowned. (Member # 8156) on :
 
i give a shit about what you could have ran with more ass in seat time.all my times were real times.and if for some strange reason the dyno wasnt off or you guys arent lying then you guys suck because i was running 12.43 with less than 340rwhp on a radial with full size wheels all around
 

---

Posted by gtowned. (Member # 8156) on :
 
and do me another favor and take this bullshit to the registry to see what mach owners with real #s have to say about it
 

---

Posted by eastoaklandss (Member # 8011) on :
 

quote:

---

Originally posted by BlowN67:
whats the roller price?

---

quote:

---

Originally posted by SIC9250:

quote:

---

Originally posted by Big block 66 f100:
anybody that thinks that mach one is bs pull out your shit and some money and lets run 12.60 x pipe program and c&l went to the dino and found out the program hurt us 18 rwhp oh yea bs on you that x pipe did add 47 rwhp

---

yes IT DID add that much with JUST an X-PIPE..i didnt believe it either till i saw the results.... i give that a +1 that was my boy steves car seen it and drove it in the low thirteens on street tires my self.... if i had enough seat time i wouldve cracked off a 12.60 too!!! ps..i was there when it did it no bullshit...basic mach..basic mods..12.60s...now the 371 rwhp idk about..but i did see it run 12.60s..

---

NO WAY!!!!i had a 03 with lts,or x,tuner,pullies, aluminum flywheel, 4.10s that would walk your mach and it was no near 371!!! lol but i have a lil 95 cobra for that ass son!!!

on another note TTT for this sick a## coupe
 

---

Posted by Big block 66 f100 (Member # 8867) on :
 
hey smart guy read all these post and tell me when i said it had 371 i said that the x pipe added 47 horse power we went to the dino before the x pipe it had 264 after just a slp x pipe he had 311 he has done some other stuff to get 371 and the 12.60 was with the 311 set up
 

---

Posted by blown95svt (Member # 8893) on :
 

quote:

---

Originally posted by Big block 66 f100:
hey smart guy read all these post and tell me when i said it had 371 i said that the x pipe added 47 horse power we went to the dino before the x pipe it had 264 after just a slp x pipe he had 311 he has done some other stuff to get 371 and the 12.60 was with the 311 set up

---

quote:

---

Originally posted by Big block 66 f100:
oh yea sorry eastoaklandss for bein all up in your shit next time if i dont want to buy the car i will leave my post to myself and everyone else on here should do the same

---

quote:

---

Originally posted by lsxoo7:
damn thats a good price for the roller ... let me see if i can sell 1 or 2 of my extra projects i have .. r u willing to trade for any cars ?

---

quote:

---

Originally posted by eastoaklandss:

quote:

---

Originally posted by BlowN67:
whats the roller price?

---

$4500 with kooks headers and exhaust, custom driveshaft and fuel system.. drop a drivetrain in hook up 5 wires and go

---

good deal if u got the motor wish i did
 

---

Posted by eastoaklandss (Member # 8011) on :
 
shit its a smokin deal especially if you put a 1k ford engine back in it

ill offer it for $4000 without the headers and driveshaft

[ January 31, 2009, 01:44 AM: Message edited by: eastoaklandss ]
 

---

Posted by 89Rodknocker (Member # 2951) on :
 
No offense Deshaun but if you lower that roller price it would go pretty quick.
 

---

Posted by eastoaklandss (Member # 8011) on :
 
not worryin about it goin quick.. if i dont get what i want ill keep it and enjoy it... since i havent had a chance to enjoy it yet... the car is still together and i enjoy it on almost every sunny day
 

---

Posted by eastoaklandss (Member # 8011) on :
 
bump really trying to sell as a roller now... $3800
 

---

Posted by Venomousnotch (Member # 8695) on :
 
TTT for a clean roller.Damn Deshaun u selling it already.Good luck with the roller sale.Bump for a clean "Notch"...
 

---

Posted by eastoaklandss (Member # 8011) on :
 
bump...
 

---

Posted by eastoaklandss (Member # 8011) on :
 
gone but no forgotten
 

---

Posted by slow96cobra (Member # 6001) on :
 

 

---

Posted by RODRIGUEZ (Member # 9104) on :
 
Who you end up selling it to?
 

---

Posted by WickedStang (Member # 7692) on :
 

quote:

---

Originally posted by RODRIGUEZ:
Who you end up selling it to?

---

My boy from Salinas. Its up and running again with a ls1 this time, for now.
 

---

Posted by 2slow2go (Member # 9159) on :
 
So its still a bootsy transgender like the previous owner...is it slow still or slower...cuz there can only be 1 slow and that's 2slow...u feel me
 

---

Posted by eastoaklandss (Member # 8011) on :
 
lol what a hater haha... but on another note tell your boy who bout it shoot me some pics or vids on youtube
 

---