Parting out 89 coupe 408 c4 shell 500 - Northern California Ford Owners

This is topic Parting out 89 coupe 408 c4 shell 500 in forum FOR(D) SALE: at Northern California Ford Owners .

To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=061651

Posted by 1SLOWLX (Member # 558) on :

I think this may be the last one I part out for a while and like always I will give cafords first crack at everything then I will post it everywhere next week. I got a crap load on my plate but who knows taking offers on parts I will make prices up in the next few days some things have prices other dont

I am going to start like this

motor 408 fully forged rotating assembly unknown engine builder its never been fired I personally would go through check clearances etc but choice is up to the buyer
motor has girdle
windage tray
canton pan
forged crank
forged h beams 6.2"
forged pistons probe dished pistons
no cam or lifters head studs included 2200

Msd dist new just dropped in never used 200

full aeromotive eliminator kit tank rails lines regualtor pump pre filter after filter never seen fuel as the car never ran sale pending

trick flow box intake for 351
lower is stage two ported by ford performance solutions 575

moroso electric water pump 200

Pa supercomp C4 transbrake
4500 stall
aluminum ds
everything to make it fit
1800

kooks headers 2" primaries and 4 inch collector header for 9.5 351 tfs R head. I have all in 4" X pipe piping with 4 inch mufflers to go with it all new just bolted up 650

I am sure there is more lots of other things I just have to tear it down and I will list as they come

[ January 04, 2009, 08:01 PM: Message edited by: 1SLOWLX ]

Posted by 87droptop50 (Member # 7185) on :

lmk when the roller ready for sale

Posted by 1SLOWLX (Member # 558) on :

Roller will be a shell there is just too much in suspension (unless you are paying for it all) if you want a real chp shell bring a trailer some friends and cash we can talk roll cage in it looks like trash.

Posted by turbo50 (Member # 6700) on :

quote:
Originally posted by 1SLOWLX:
Roller will be a shell there is just too much in suspension (unless you are paying for it all) if you want a real chp shell bring a trailer some friends and cash we can talk roll cage in it looks like trash.

What is in the rear for suspension? PM me Albert.

Dan

Posted by saleen_freak (Member # 6521) on :

What color is your trickflow intake manifold? ANd how much do you want for it? Is it complete with all the gaskets and hardware? pm me Thanks!!!

Posted by 87#184saleen (Member # 6276) on :

im intrested in 90mm tb and the kooks headers

Posted by jmcclesk (Member # 1355) on :

Holy crap another one!!!!!! what do you want for the 408 shortblock?

[ December 17, 2008, 01:52 AM: Message edited by: jmcclesk ]

Posted by 87droptop50 (Member # 7185) on :

pm sent

Posted by 1991 SSP 331 TWIN TURBO (Member # 7840) on :

How much for the complete shell, body doors int fenders bumpers lites etc, no suspension

Posted by 1SLOWLX (Member # 558) on :

manifold is looks grey it has everything it's basically new just bolted up make offer please keep the lowballs to youself

Throttle body with the little egr plate I'll take 200 for

Kooks headers selling with the exhaust piping and muffles as I have no use for them 650 headers alone were 720

408w depends on you want it ie leave the solid cam in there with the link bar lifters it's a custom grind from fps rotating assembly was 1550 alone

Could has no interior I was going to be a drag car reg is out six years have the pink it's clean make me an offer and bring lots of peopele and a trailer to get it when I'm ready

Posted by 427 StRoKeR SN94 (Member # 8722) on :

im intrested in the exsuast pm sent

Posted by LoveMy 88Gt (Member # 8822) on :

How much are u looking to get for the 408? also would my vortech sc from my 302 bolt on to it? thx

Posted by 1SLOWLX (Member # 558) on :

All depends on how you take the 408. It has an unknown builder but if fully forged. It has a solid roller cam in it right now with link bar lifters canton pan main girdle etc

Posted by 87#184saleen (Member # 6276) on :

quote:
Originally posted by LoveMy 88Gt:
How much are u looking to get for the 408? also would my vortech sc from my 302 bolt on to it? thx

i think you have to modify your brakets

Posted by kennebellgt (Member # 8395) on :

dude everytime you post i literally say WTF, dude what do you do? where do you get all these parts? im stumped what do you do for work lol i have trouble just getting a pair of heads and you seem to pull them out of your ass like its nothing, i love it wish i could do all that [Smile]

Posted by 1SLOWLX (Member # 558) on :

quote:
Originally posted by kennebellgt:
dude everytime you post i literally say WTF, dude what do you do? where do you get all these parts? im stumped what do you do for work lol i have trouble just getting a pair of heads and you seem to pull them out of your ass like its nothing, i love it wish i could do all that

Cash is a good thing right now and people are hurting for it and I needed some new tires for my 67 [Wink]

. Good thing I have a nice amount stashed away [Smile]

just look at it this way you guys get good stuff at for less $. The avenger heads I have are pretty nice and are damn cheap.

[ December 19, 2008, 07:26 AM: Message edited by: 1SLOWLX ]

Posted by Don (Member # 938) on :

I need a 4.56 built 8.8 rearend. What is in this car?

Posted by kennebellgt (Member # 8395) on :

yeah i'd like to get them heads but money is tight at the moment, but i'll be sure to hit you up when i need heads [Smile]

Posted by 1SLOWLX (Member # 558) on :

don its 5 lug with rear disk. The rear has 4.10's 31 spline axels alurn pro series mac cover and the axel tubs have been welded up

Posted by 88 viper sniper (Member # 8755) on :

PM sent

Posted by Cm4hawks (Member # 5231) on :

Pm sent

Posted by 1SLOWLX (Member # 558) on :

Pics of your parts will be comming I am on my way to finish it and take the rest apart let me know what you want a pic of [Smile]

Posted by Don (Member # 938) on :

how much for the rearend?

Posted by Cm4hawks (Member # 5231) on :

LOL i am waiting for the same answer

quote:
Originally posted by Don:
how much for the rearend?

Posted by 1SLOWLX (Member # 558) on :

ttt any offers on the Shell? I would hate to bring my sawaz out of retirement [Wink]

. Anyone need body pieces maybe the sawaz will come out poor chp car oh well

Posted by 1SLOWLX (Member # 558) on :

roller isn't for sale only the shell

Posted by BlowN67 (Member # 4229) on :

quote:
Originally posted by 1SLOWLX:
roller isn't for sale only the shell

now it became a shell [Frown]

Posted by 1SLOWLX (Member # 558) on :

won't get want for it as a roller so it will be a shell it rolls right now but probably won't real soon [Wink]

Posted by 1965FALCOON (Member # 8773) on :

this guy hacks up beautiful mustangs and makes a lot of money at it but so far no more prices have been posted as promissed i want prices

Posted by 1SLOWLX (Member # 558) on :

quote:
Originally posted by 1965FALCOON:
this guy hacks up beautiful mustangs and makes a lot of money at it but so far no more prices have been posted as promissed i want prices

I wouldn't say a lot of money off of it. You got to realize the bs I deal with the time it takes to sell and a risk I take at buying these cars also at the same time. For instance the last car I brought home I bought it sight unseen didn't make a penny off of it because the owner lied about parts but what can I do I had to try and make the best of it. This mustang was suppose to have a new rebuilt procharger on it. After I pulled it the blades dont look new to me and looks like it needs a rebuild at least an impeller one of the reasons that it I took the listing down. You call this black car beautiful? Are you kidding me... I mean most of the things on this car are new motor tranny etc but again I got to deal with lies about what the car is suppose to be or have. If any of you want to try and do it be my guest Im not stoping you at all. I look at it this way most of you guys get killer deals on parts some are brand new some are pretty damn new. I will post prices on stuff but most cafords people want everything for nothing that is one of the reasons I post stuff for sale elsewhere as well. I am probably going to cut this car up due to the fact the owner lied to me and I want to video myself with the plasma cutter dystroying his pride and joy or maybe a couple pics of me with a bat to his windows.

[ December 23, 2008, 07:59 PM: Message edited by: 1SLOWLX ]

Posted by 1965FALCOON (Member # 8773) on :

sorry did not mean my reply that way i know you do the best you can sorry to hear about the blower that was the part i was most interested in i know its easy to say just post it but it also takes time that nobody has anymore i was hoping to buy some xmas presents for the wife and would prefer to give it to somebody somewhat local than to buy long distance out of state we are all hurting and everybody is struggling i understand please accept my apology and know that my last post did not come out as i wanted it to i was in between smog test just trying to get some news sorry about that

Posted by 70mach351 (Member # 7528) on :

pm me with price for shell. Ill take everything out of my cobra and put it in this. Do you still have the hood to go with the shell. Let me know and what city ur in.

Posted by 1SLOWLX (Member # 558) on :

quote:
Originally posted by 1965FALCOON:
sorry did not mean my reply that way i know you do the best you can sorry to hear about the blower that was the part i was most interested in i know its easy to say just post it but it also takes time that nobody has anymore i was hoping to buy some xmas presents for the wife and would prefer to give it to somebody somewhat local than to buy long distance out of state we are all hurting and everybody is struggling i understand please accept my apology and know that my last post did not come out as i wanted it to i was in between smog test just trying to get some news sorry about that

Apology accepted here is some pics of the impeller I wasn't too happy either when I looked at it but hey shit happens It isn't bad bad but it isn't right

Posted by StephenB (Member # 8339) on :

are you going to sell the rims and tires?

Posted by 1SLOWLX (Member # 558) on :

Yeah rims and tires will be for sale. tires are now old et streets as I stole the et drags for my car

Posted by StephenB (Member # 8339) on :

how much do you want for them?

Posted by 1965FALCOON (Member # 8773) on :

how much for the blower i see it does need a wheel but that is minor how is the play on the shaft i called procharger they said it could cost up to 1700 to fix it if it was all bad but just a wheel would be 300 or so also does it say d1r or d1x or d1sc or just d1

Posted by gtowned. (Member # 8156) on :

are the wheels and tires spoken for yet

Posted by 1SLOWLX (Member # 558) on :

I was told it was a d1 it has a 12 rib setup polished brackets and big red blow off valve. I also called procharger they told me it could be anywhere from 300-1500 plus shipping to rebuild it. I have a bunch of extras for it cog setup extra pullies etc. I will take an offer on it with or without the extras. If I have to the unit will live on my shelf I don't want to give it away but I also realize it needs work.

As for the wheels they are still for sale the fronts taking offers on them. They won't be off until I get the shell sold or cut it up I need a way to move the car around

Posted by BlowN67 (Member # 4229) on :

bs on rears

Posted by 1SLOWLX (Member # 558) on :

15x10 6.5 bs

Posted by DRIVINFST (Member # 2430) on :

What about the radiator? Brand, # of cores, overall condition? How much do you want for it?
Thanks

Posted by 1SLOWLX (Member # 558) on :

Radiator is spoken for

Posted by warhorse58gt (Member # 7702) on :

are the doors for sale? if so are they roll up and what price?

Posted by mustang928 (Member # 2123) on :

How much for the catch can.. any pics of that?

Posted by 1SLOWLX (Member # 558) on :

500 for the shell I will start cutting it up late next week/weekend

Posted by turbo50 (Member # 6700) on :

PM sent

Posted by 1SLOWLX (Member # 558) on :

sale pending on the shell

Posted by BlowN67 (Member # 4229) on :

quote:
Originally posted by 1SLOWLX:
sale pending on the shell

well that sux atleast it saves me money

Posted by 1965FALCOON (Member # 8773) on :

WHAT DOES THE SHELL CONSIST OF CAN I SEE A PIC AND CAN WE MAKE A DEAL ON THE SHELL AND THE BLOWER

Posted by 925GT50 (Member # 2683) on :

quote:
Originally posted by 1965FALCOON:
WHAT DOES THE SHELL CONSIST OF CAN I SEE A PIC AND CAN WE MAKE A DEAL ON THE SHELL AND THE BLOWER

x2 interested

Posted by 1SLOWLX (Member # 558) on :

Shell is basically sold got someone picking it up on sunday it came with doors fenders front rear bumper trunk lid I think thats pretty much a shell [Wink]

Posted by brian cvitanich (Member # 8830) on :

how much for wheels/tires and rear end

Posted by 1SLOWLX (Member # 558) on :

TTT Tranny price lowered

Fueled by Ford Mustang Owners
on CaliforniaFords.com