T O P I C R E V I E W
|
trottin4.6
Member # 8597
|
posted
Cam and lifters have 3 passes on them.
Came out of my 67 Mustang with a 351 n/a. Car went 12.3, 12.0, and 11.8 the only three passes it made with this cam. Car had 25 degrees total timing, zero carb tuning, on radials. This cam will go 10's N/A with the right parts.
Cam Motion Cam Grind Number R2592-2642-08+4 Specs: Duration (intake/exaust) 262/267 Lift (intake/exaust) .683/.670 Lobe Center Separation 108 Intake Centerline 104
Lifters are Comp Cams Link Bar style mechanical roller part number CCA-838-16.
Cam and Lifters cost 700 new. I have receipts for both.
Sale for $450.
i am not on here much. email me at wheelsup351@yahoo.com or call 650-255-7265 [ December 08, 2008, 04:17 PM: Message edited by: trottin4.6 ]
|
trottin4.6
Member # 8597
|
posted
ttmft
|
|