motors, rims, intakes ,parts, misc shit - Northern California Ford Owners

This is topic motors, rims, intakes ,parts, misc shit in forum FOR(D) SALE: at Northern California Ford Owners .

To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=060472

Posted by BlowN67 (Member # 4229) on :

351w roller shortblock $450

vic jr 302 intake carb $175

rpm carb 302 intake $165

16" v6 wheels with decent tread $225

panhard bar Kennhy Brown $300

twin 56mm turbo's air research $1100

600cfm carb holley $200

650 carb holley $400

850 carb holley $400

crane ignbox w/rev limit $100

D&D drag race lower control arms $175

mm adj lower conrol arms $260

mt et streets 28x12.5 /15 $275

mac shortie foxbody headers $80

mac 3" prochamber $160

275/60/15 mt drag radials $175

mcloed clutch $650

tfs r heads$2200

4.10 rearend no axles,brakes $150

victor heads bare $800

about 5 cams, $155 a cam

misc 2.3t parts

v6 aode tranny 1996 $100

1996 gt long block rod knock $150

2000 kx250 w/mods $2200obo

15x10 4.5 bs weld draglites $250

two 38mm xspower wastegates $225

4" in/out intercooler new $550

svoT5 needs rebuild $75

two 15x4 aluminum 5 lug front runners/tires $150

spec3 clutch 26spl used $150

94/95 t5 bell $40

408w shortblock unassembled low compression $2250

71 351w bare block std bore $325

lakewood bell housing was moddified to clear down pipe. missing mid plate $100

aluminum tremec bell for sbf running tremec 3550,tko,tko2,tko500,tko600,mmr750,mmr900[b]$100[b/]

pm or emails for pics gonein67@aol.com

probably alot i'm forgetting

[ November 24, 2008, 01:34 AM: Message edited by: BlowN67 ]

Posted by 68gtscode (Member # 8679) on :

PM sent.

Posted by BlowN67 (Member # 4229) on :

hae pics of most everything still work on a few.

Posted by BlowN67 (Member # 4229) on :

ttt

Posted by blwn97cobra (Member # 6613) on :

what are the specs of the cams you got?

Posted by BlowN67 (Member # 4229) on :

[patriot]

Posted by BlowN67 (Member # 4229) on :

ttt

Posted by jaejae (Member # 7958) on :

is the prochamber for shortys?

Posted by BlowN67 (Member # 4229) on :

yes

Posted by BlowN67 (Member # 4229) on :

ttt

Posted by 89bluenotch (Member # 7454) on :

what is the rear end out of??

Posted by BlowN67 (Member # 4229) on :

99+ housing center section an gears,** just add axles,backing plates,mounting for caliburs, caliburs,a disk,e-brake cables

Posted by BlowN67 (Member # 4229) on :

ttt

Posted by BlowN67 (Member # 4229) on :

some intrest an some pending.. lets move these items moving on to different hobbies right now..

Posted by welch93lx (Member # 8748) on :

do u have pic of da 275/60/15 mt drag radials

Posted by BlowN67 (Member # 4229) on :

ttt

Posted by 9COBRA3 (Member # 4216) on :

..interested in the rear end...whats the condition on it and miles? will i be able to run the stock drums and brakes on it? and will it work on a 87-93

[ November 22, 2008, 05:59 PM: Message edited by: 9COBRA3 ]

Posted by BlowN67 (Member # 4229) on :

about 5k miles oin it.. an no u cantput ranger axles/drums on 99+ rearend. lmk i can deliver to fremont on tuesday.

Posted by BlowN67 (Member # 4229) on :

ttt

Posted by STREETFIGHTER50 (Member # 2973) on :

prochamber 3" for shorties right? how many miles/passes on the drag radials? pics if possible to nyjr50@yahoo.com please

Posted by BlowN67 (Member # 4229) on :

email sent nick. thanx JOHN

Posted by welch93lx (Member # 8748) on :

can i get a pic of da two 15x4 aluminum 5 lug front runners/tires

Posted by BlowN67 (Member # 4229) on :

Posted by adower (Member # 5955) on :

Pics of the LCAS to me please! That is if you want my money! [patriot]

Posted by BlowN67 (Member # 4229) on :

ttt

Posted by baySHO510 (Member # 8046) on :

Any chance you have an E-303 cam?

Posted by BlowN67 (Member # 4229) on :

have a cm similar an also a f-303 cam

Fueled by Ford Mustang Owners
on CaliforniaFords.com