This is topic WTB everything ,,, heads cam headers in forum FOR(D) SALE: at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=058857
Posted by hek (Member # 8587) on :
 
im looking for alot of things .. alot ..

heads .. maybe some gt40p or sumthing aftermarket

long tubes 1 5/8 or 1 3/4 with hpipes

17" and 16" chrome cobra r 4 lug

front seat .. aftermarket fuel pump and sending unit .. and basically anything and everything after market

looking for a set of slicks and skinnys too ..
nitrous supercharger what ever u guys have .. let me knw and im interested ..

pm or email me .. lsxoo7@live.com
 
Posted by 1SLOWLX (Member # 558) on :
 
I got a complete race exhaust for you 1 3/4 stepped to 1 7/8 bassini headers true full 3in exhuast with a flow master pro camber 600 for it all
 
Posted by HaulinAss Motorsports (Member # 541) on :
 
Edelbrock Aluminum Performer 5.0 Heads with 1.6 FMS Roller Rockers $895.00 woth rockers $795.00 without rockers. Also have Performer Intake,BBK Cold Air, Mass Air,Inectors,TB Etc.....

Here is a link to what I have

Performance Parts

408-420-3003
 
Posted by 92stangLX (Member # 3252) on :
 
I have a SHITLOAD of stuff that I am getting ready to sell:

Rear end (3:55 FMS gears, Auburn carrier, Stainless steel disk brakes, e-brake cables, less than 600 miles) $550

Mac Headers $100

Mac Catt'd h-pipe w/ magnaflow cats $175

Mac cat back w/ LX tips $175

Crane Hi6 Fireball ignition $150

MSD TFI coil $25

Ford Racing adjustable clutch cable, maximum motorsport adjuster, Steeda triple hook quadrant $75

Tokico Illumina 5-way adjustable shocks/struts $250

Tremec 3550 setup COMPLETE $1200

bbk upper and lower control arms $190

Prothane motor mounts $65

GT40 intake w/ 65 mm throttle body $450

Clear corner headlights $100

Anderson Motorsport crome valve covers $50

Lots more for sale... just ask [patriot]
 
Posted by 92_chp (Member # 5574) on :
 
i have Edelbrock Intake manifold 5.0 Polished , complete PowerDyne supercharger, wilwood superlite II brakes four piston, Crane cams HI6TR CD ignition with rev-limit and timing retard control and more.

check my post for sale got a ton of things.
 
Posted by hek (Member # 8587) on :
 
1slow lx .. will u take 500 ? and some pics to my email lsxoo7@live.com

im interested so pm ..

anyone have a set of good gt40p heads ?

cold air intake ?
 
Posted by 1SLOWLX (Member # 558) on :
 
500 is a little low considering the headers are 700 new without the rest
 
Posted by NoSirImDD (Member # 8584) on :
 
I got BBK fuel rails, MSD 6AL with BTM, rear upper and lower tubular control arms (I think they're Jegsters), and I think thats it.

$100 for rails
$200 for msd w/ btm
$120 for control arms

email PuttPuttgsx@yahoo.com
 
Posted by 89Rodknocker (Member # 2951) on :
 
We'll I might put in my 2 cents.

Elderbrock performer cyl heads. fully ported and polished opened up to 1262's on the intake side, and 1 3/4 exhaust. Stock apperaing but flow 5 cfm less than afr 185's with updated cnc port job. $700 without rockers $800 with rockers.

Elderbrock performer rpm intake NIB. Gasket matched to a 1250 intake gasket and extrude honed. $400

#30lbs injectors. $100

Complete aeromotive A1000 fuel system minus fuel tank $700

You wanna go fast give me a call. Or you can buy stock stuff and go fast. [Big Grin]
 
Posted by lsxoo7 (Member # 8587) on :
 
pictures of the heads please to my email .. thanks
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com