This is topic turbo mustang 9.60s in forum FOR(D) SALE: at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=057947
Posted by sicf250 (Member # 6634) on :
 
http://profile.imageshack.us/user/malloy50/
have more pics just email me sicgmc@comcast.net
90 mustang gt clean daily driver runs 9.60s all day long never gets hot.
No A/C or heat
Car is very streetable and fast
Runs in 9's at 140+ on 16#s of boost trapping in the 6300-6400 range
60's in the mid 1.30 range on low boost
18000.00 OBO for a 9 sec streetable car


Motor
DSS bullet with main support
Canton 7 quart pan
Accel duel sync distributor
AFR 205 heads
Custom welded sheet metal upper to tunnel ram lower polished
Custom cam
Kooks turbo headers hi-temp coated black
75MM polished TB
AFCO alum radiator


Driveline
C4
Dynamic M2 w/brake
With billet servo and cover
TcT converter 4200 stall
Rear mounted Trans cooler with fan
8.8
3.55 with moser 33 spline axles and spool
Strange rear disk conversion
Aluminum drive shaft
Svo diff cover

Suspension
All tubular front end
Coilovers
Manual rack flaming river
Qa1 front and rear adjustables
Adjustable rear upper and lowers
Caster Camber plates
Anti roll bar

Fuel system
10 gal aluminum cell
Magnafuel efi pump 4301 and filter
-10 feed to rails -8 return
Polished rails
72# injectors
Aromotive reg

Electronics
Accel DFi gen7 tuned buy job spetter
Msd Digital7 programmable with hvc2 coil


Power adder
Turbonetics 76mm Q-trim with .96 exhaust housing
3 inch down pipe
Front mount air to air intercooler
Turbonetics racegate
Eboost2 electronic boost controller
Vortech mondo blow off valve

Interior
Black
Kirky race seats with black covers
6 point mild steel roll bar
Autometer gauges
Alumium rear bulkhead

Exterior
Red with custom shredder vynil graphics done by stickerdude
4in cowl hood
Weld draglites with Et drags 28x10.5

[ July 11, 2008, 12:31 AM: Message edited by: sicf250 ]
 
Posted by Dave50 (Member # 5238) on :
 
Call me modest but... does the mother fucker swing-em? Very nice car bro your gonna have to go national with this though, try corral or ebay.
 
Posted by Fostang (Member # 3752) on :
 
So are you gonna waste peoples time with this?

Make a 5 hr roundtrip drive negotiate a price and agree that I would return the following day with the complete cash only because you didn't feel comfortble taking a check to cover the rest when I had more than half the asking price in cash.

Then turn around and call the deal off the following day saying I'm keeping it. After wasting my time and money.
 
Posted by turbo50 (Member # 6700) on :
 
quote:
Originally posted by Fostang:
So are you gonna waste peoples time with this?

Make a 5 hr roundtrip drive negotiate a price and agree that I would return the following day with the complete cash only because you didn't feel comfortble taking a check to cover the rest when I had more than half the asking price in cash.

Then turn around and call the deal off the following day saying I'm keeping it. After wasting my time and money.
Too bad, would have been a nice addition to your stable.

You had two easy 9 second motors on the stands when I was there last.....
 
Posted by Yaterstang (Member # 7659) on :
 
quote:
Originally posted by Fostang:
So are you gonna waste peoples time with this?

Make a 5 hr roundtrip drive negotiate a price and agree that I would return the following day with the complete cash only because you didn't feel comfortble taking a check to cover the rest when I had more than half the asking price in cash.

Then turn around and call the deal off the following day saying I'm keeping it. After wasting my time and money.
That sux [Eek!]
 
Posted by 302oons (Member # 8105) on :
 
9 second car asking "will it swang-em" <- wow, that is a stupid ass question...period
 
Posted by Dave50 (Member # 5238) on :
 
quote:
Originally posted by 302oons:
9 second car asking "will it swang-em" <- wow, that is a stupid ass question...period
LMAO! Youre too much!
 
Posted by sicf250 (Member # 6634) on :
 
what are you talking about Fostang you never came and looked at shit nor have i talked to you about the car you must have me mixed up with someone else
 
Posted by 89saleen (Member # 3083) on :
 
Bitchin car. I like it. Good luck. TTT

[patriot]
 
Posted by Fostang (Member # 3752) on :
 
oh i dont have ur bitch ass mistaken....and it wasnt about this car. it delt with a $10k motor.
 
Posted by Dave50 (Member # 5238) on :
 
quote:
Originally posted by Fostang:
oh i dont have ur bitch ass mistaken....and it wasnt about this car. it delt with a $10k motor.
Im hella liking the new fostang! You and I can be buddys! I like the "bitch" part!
 
Posted by sicf250 (Member # 6634) on :
 
you never came and looked at a motor from me.i parted a motor out but it was not even close to a 10 k motor so i dont no what your talking about.and if you have a problem with me look for me at the track and we can seattle it there cant miss me at almost 7 foot tall.and we will see who the bitch is then

[ July 12, 2008, 08:29 PM: Message edited by: sicf250 ]
 
Posted by lambonotch (Member # 5758) on :
 
G UNIT!
 
Posted by badazlx (Member # 4899) on :
 
gotta love the internet tough guys "e-thugs"
 
Posted by Dave50 (Member # 5238) on :
 
quote:
Originally posted by badazlx:
gotta love the internet tough guys "e-thugs"
LMAO! Calling an LEO a thug?= Priceless! Calling an LEO out at the racetrack... Get that mofo guys whoop his ass! LMAO!
 
Posted by Fostang (Member # 3752) on :
 
With your response....now I see whats going on here. You have mental matuarity of a 3 year old.

So your telling me you weren't asking about 10K for a 347 r blocked billet crank tfs r headed f2 pro charged motor?

I could care less about the money I wasted on gas. But the fact that you wasted my time. I just want others to know the type of person you are when it comes to deals.
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com