This is topic lot's of stuff!!! in forum FOR(D) SALE: at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=057325
Posted by Quick65 (Member # 6153) on :
 
i have lots of stuff for sale. all of it is in great condition and off of my car, just did a little remodeling is all.
(2)15x10 draglites
(2)15x9 draglites
(2)15x4.5 draglites
qa-1 coilovers 12 way adjustable
anderson ford PMS with interact software and lo-imp. driver for injectors
uego 2000 wideband 02 sensor
85lb/hr injectors
80mm pro m cal'd for above injectors
efi and injector harnesses
7 qt. front sump canton w/ oil return
1.6 ratio harland sharp roller rockers
bennet racing blower cam 585/585 242/248 115*
9.5" converter 10.5" bolt circle c-4
157 tooth zero balance sfi flexplate
art carr c-4 w/transbrake
hurst quarter-stick shifter
vortech YSi with cogs,10 ribs, and belts
anderson ford power pipe/mondo bypass kit
$eriou$ offers only, don't call just to talk.
916 813-6331
 
Posted by svfreerider87 (Member # 5748) on :
 
how much are you asking for the art carr?
 
Posted by ugotsmoked (Member # 6069) on :
 
Why you selling all your stuff scott?
 
Posted by Over-Rev (Member # 8271) on :
 
How much?

2)15x10 draglites
2)15x4.5 draglites

[ June 14, 2008, 12:55 PM: Message edited by: Over-Rev ]
 
Posted by Quick65 (Member # 6153) on :
 
i'm selling all my stuff....uh....cause i got new stuff. as soon as the pile of shit gets out of the paint shop it'll be back out. i just hope this .750" solid roller does ok with the
F-2 and the glide.


i'll take $350 for the 15x10/15x4.5 combo. they have 165's/28x10.5 et drags w/ tubes and are in damn good shape.
 
Posted by jordan_0806 (Member # 5888) on :
 
scott...would you take a trade on the injectors?

I have a set of 160lb ..yes 1-6-0... injectors...lol...
 
Posted by jayl (Member # 185) on :
 
quote:
Originally posted by jordan_0806:
scott...would you take a trade on the injectors?

I have a set of 160lb ..yes 1-6-0... injectors...lol...
or do you wanna sell the 1-6-0's outright?
 
Posted by jayl (Member # 185) on :
 
How much ?

uego 2000 wideband 02 sensor

Are those the plug n play for the PMS unit? I read something that I can tie that into my PMS unit ? Thanks

Jason
 
Posted by Quick65 (Member # 6153) on :
 
$300 for the uego.
 
Posted by WickedStang (Member # 7692) on :
 
art carr 9.5" 4500rpm converter c-4
157 tooth zero balance sfi flexplate
art carr c-4 w/transbrakeart carr 9.5" 4500rpm converter c-4
vortech YSi with cogs,10 ribs, and belts
anderson ford power pipe/mondo bypass kit

What u asking about these. What are the miles on them? pm me LMK Thanks
 
Posted by Don (Member # 938) on :
 
Draglites 4 or 5 lug? How much for the c4.
 
Posted by Quick65 (Member # 6153) on :
 
the c-4 works fine, but has a small leak from the front seal. $300 with the transbrake and manual valve body. the converter $200. flexplate $50. draglites are 5 lug. the Ysi/cogs/10ribs/powerpipe/mondo bypass kit $2500.
there might be 500 miles on this stuff.
i have all the receipts/warantees for all of it.
 
Posted by Quick65 (Member # 6153) on :
 
let's make this a little easier. make me an offer, a CASH offer for the stuff.
money talks.
 
Posted by Quick65 (Member # 6153) on :
 
bumper
 
Posted by Don (Member # 938) on :
 
I would like the tranny and converter. When can we meet.
 
Posted by phil a (Member # 6951) on :
 
Do you think the draglites will fit under a stock (non-tubbed) infiniti g20 fender? trying to find something to hold down that power.
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com