This is topic looking for a 500hp SBF pump gas motor in forum FOR(D) SALE: at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=057314
Posted by trbo50 (Member # 1671) on :
 
I'm looking for a motor that can run on 92-100 octane pump gas. Please let me know what you have to sell.

Thanks,
Norman
650 520 0998
n_chang@pacbell.net
 
Posted by fasthatch (Member # 7277) on :
 
n/a or power adder
 
Posted by STANGSALLY76 (Member # 5342) on :
 
i have a 349cid efi intake to pan fresh
makes around 600hp n/a pump gas not a problem
all the best i have over $10000 invested
ill take $7000 call me if interested
916-676-3947

p.s its set up for a bottle as well.
 
Posted by kingmoochr (Member # 5834) on :
 
http://www.californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic&f=5&t=057184#000008

got all the swap parts for a fox as well
 
Posted by trbo50 (Member # 1671) on :
 
prefer aspirated carb setup. Something in the 400+ ci and a true pump gas motor
 
Posted by kingmoochr (Member # 5834) on :
 
dude, click my link, thats EXACTLY what that motor is
 
Posted by kingmoochr (Member # 5834) on :
 
408cid scat steel crank and h beam rods
srp 19cc dish pistons
rhs cyl heads big runner with 208/160 valves fully ported and bowl blended (11-1 comp combo, will run pump gas with installed cam)
port matched vic jr intake
stainless ferrera valves
isky springs to handle 650 lift
isky rr641381 grind camshaft (640 lift)
comp solid roller lifters
probe shaft rockers
cloyes chain
moroso fox pan
plateau finish on bores and zero decked on a storm vulcan, and balanced (obviously)
all clevite h bearings
sealed power low tension rings
all felpro gaskets
powerbond sfi balancer
march serp setup
msd distributor (needs slight clearancing for intake and a bronze gear, was purchased with a different setup in mind. i can clearance for you if youd like)
 
Posted by 88DroptopGT (Member # 2535) on :
 
Make sure it's a 4-bolt or a 69-70 351W block. A "mexican" block will suffice but it gets sketchy at that power level. There are other blocks that are strong but you get the idea.

Just some advice TTT for you.
 
Posted by kingmoochr (Member # 5834) on :
 
a properly built na motor wont have any problem at that power level (since he specified a 351w). even a newer roller 351 can easily handle over 600 na hp. mine is a 79, so its higher nickel content than 80+
 
Posted by kingmoochr (Member # 5834) on :
 
so im literally selling exactly what you are looking for, are you really just not that interested?
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com