This is topic Viper Spec T56 For Ford Mustang 5.0 79-93 Direct Bolt In - $2800 in forum FOR(D) SALE: at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=055331
Posted by FivePTSlow (Member # 7682) on
:
Click Here For Pictures
Call Aaron 916-613-1094
Up for sale is a Viper Spec T-56 6 Speed Transmission bolt in kit that is lightly used(under 5,000 miles on the entire setup). This comes with D&D Performance's highest capacity single disc clutch and steel flywheel(all ARP Fasteners included) You also get the install kit which consists of the crossmember, aluminum driveline, and bellhousing. This also comes with a Pro 5.0 shifter.
$2,800 FOR THE KIT, OR $2,200 PLUS YOUR T5 SETUP(in good working order)
Here is a link to D&D's sight so you can see for yourself how much this setup really costs http://www.ddperformance.com/T56%20Kit%201979-1993.htm
And here are the specs from D&D's websight 1979-1993 Viper T56 Installation Kit
Viper T56 Transmission, Steel Bellhousing, Aluminum Driveshaft, Shifter, Crossmember, Transmission Mount, Speedometer Cable, Mounting Hardware.
* Gear Ratio's 2.66 1.78 1.30 1.00 .80 .62 *
* Rated @ 650 Lbs. Ft. *
* No Cutting or fabricating. A True Bolt in Kit.*
$3899 <====Look at that price...and that's not even with the clutch and flywheel, plus you have to pay $200+ to ship it!
[ March 19, 2008, 08:07 PM: Message edited by: FivePTSlow ]
Posted by Blind (Member # 3052) on
:
change your craigslist link, it goes directly to your edit the listing page, not the listing page.
you want to link here -
http://sacramento.craigslist.org/pts/611918671.html
Posted by FivePTSlow (Member # 7682) on
:
I fixed the link thanks for the info
Posted by jmcclesk (Member # 1355) on
:
Take some new picts
Posted by Stangs R Us *red GT black rallyes* (Member # 4495) on
:
i will try and get some new pics up of it
Posted by Elliott (Member # 7471) on
:
can you take a pic of the side of the housing so we can see if its a Borg Warner tranny or a Tremec.. the stamping should be on the side where the fill plug is. there's an internal integrity difference between the two.
[ March 22, 2008, 01:28 AM: Message edited by: Elliott ]
Posted by FivePTSlow (Member # 7682) on
:
If you click the link thats in my original post it will take you to craigslist and there is a picture already on there with exactly what you're asking for.
Posted by Elliott (Member # 7471) on
:
the tailshafts usually get interchanged with the main casings. i tried to blow up the pic of the side but its too distorted... n/m though the person i was showing this too, found the tranny we were looking for. thanks for time
[ March 22, 2008, 03:40 AM: Message edited by: Elliott ]
Posted by FivePTSlow (Member # 7682) on
:
It says borg warner right by the big Viper I truly don't know how you could have missed it.
Fueled by Ford Mustang Owners
on CaliforniaFords.com