94 Lightning For Sale and Parting out SC 90LX - Northern California Ford Owners

This is topic 94 Lightning For Sale and Parting out SC 90LX in forum FOR(D) SALE: at Northern California Ford Owners .

To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=054661

Posted by Fostang (Member # 3752) on :

Well it's time to down size the stable.

First vehicle

94 lightning #625
blk/gry interior
clean title
New tires less than 10K ago along with alignment.
Stock other than Pulleys.
gt40 heads/intake/4.10 gears
210K well maintained miles
Has a slow rear main seal leak [Frown]

$4,700 obo

Parting out 90LX
Once the car is done being parted out I will put it back to stock and sell it. If anyone is interested.

65k original miles
clean title
blk/gry interior

PARTS

Vortech SQ charger with 5K miles
7"crank 3" blower pulleys
anderson power pipe
$1,850

42 lb injectors no maf unless you want a 90 LMAF
$300 for both maf and injectors

gt40 intake with downs ford box upper
$375

70mm tb and spacer edelbrock/bbk
$140

edelbrock 1.90 performer heads
$925

1.7 crane gold series pedestal rockers
$150

e303 cam
$100

bbk shorty headers
$100

tremec 3550 tranny
$950 neg. if you have a good t-5

Hotchkins upper/lower control arms
$175

Send me a cash offer on what your interested in and I would need stock parts in good condition.These are still on the car so I will need sometime to take them off and have them ready for you.

I have a ton of other parts for sale too but I need to go through my inventory.

These include other aluminum heads including TFS,Edelbrock,Canfield,GT-40's,Windsor Jr.

Nitrous kits I think I still have a T trim Vortech... Like I said I need to look through my things because I know I have a lot more stuff I'd like to get rid of since I'm pretty much done with fox bodies and will only be keeping my cobra at least for a while longer.

Tfs stage II cam sold
1.7 RR 3/8's trickflow $150
smog pump idler billet set up $40
70 mm tb/spacer pro products $115
Summit Fabricated aluminum valve covers NEW $120
302 Head bolts NEW ARP
1.7 cobra ford rr's NEW $150
24lb blue top injectors $100
83lb simens deka low impedence injectors
Fox saleen kit NO wing front rear and side skirts only.
Ported stage II lower gt40 intake 302 $250
Stock gt 40 tubular upper intake
351w rpm pro products efi intake upper/lower NEW sold
302 edelbrock performer/rpm lower $150
2 blk magic fans $100 each
Chrome 18x9 18x10.5 03 cobra rims in very nice shape no tires. $450
3 73 mm C&L mafs $95 each
2 FMU forgot the calibration but disk's can be bought. $50 each
dual pillar gauge for fox
70 mm cobra mass air $90
2 sets of solid motor mounts for fox.
351W swap oil pan Miloden sold
351W chrome front sump oil pan $35

Heads are as follows

ported tfs 2.02 1.6 valved 5k on it
$1000

Edelbrock 2.02 1.6 valved ported and fresh 0 on them since being freshened up.
$1000

Canfield ported 2.02 1.6 valved heads 1500 miles
$1200

Windsor jr 1.94 xxx exhaust valved unk milage
sale pending

fresh 0 mile gt40's
$450

[ February 24, 2008, 02:44 AM: Message edited by: Fostang ]

Posted by RED@7kVERT *8850GT* (Member # 5909) on :

OH MY GO FAST GOODIES!!!

[burnout]

Posted by Fostang (Member # 3752) on :

Just found a complete vortech aftercooler kit.

Has an upgraded BOV that can be recycled back welded on. AFCO cooler with 2 electric fans.

All AN fittins on it.

$1150 for this bad boy set up

[ February 21, 2008, 04:37 PM: Message edited by: Fostang ]

Posted by WickedStang (Member # 7692) on :

These include other aluminum heads including TFS,Edelbrock,Canfield,GT-40's,Windsor Jr.

Interested in some heads. LMK what u got,

Posted by Fostang (Member # 3752) on :

Just took a gander at what I have.

I am takin reasonable offers and will post a price of what I'm looking to get once I have a bit of time to research fair market value.

NO I will NOT take low ball offers. I do NOT have to sell any of these things.

Tfs stage II cam $115
1.7 RR 3/8's trickflow $150
smog pump idler billet set up $40
70 mm tb/spacer pro products $115
Summit Fabricated aluminum valve covers NEW $120
302 Head bolts NEW ARP
1.7 cobra ford rr's NEW $150
24lb blue top injectors $100
83lb simens deka low impedence injectors
Fox saleen kit NO wing front rear and side skirts only.
Ported stage II lower gt40 intake 302 $250
Stock gt 40 tubular upper intake
351w rpm pro products efi intake upper/lower NEW $275
302 edelbrock performer/rpm lower $150
2 blk magic fans $100 each
Chrome 18x9 18x10.5 03 cobra rims in very nice shape no tires. $450
3 73 mm C&L mafs $95 each
2 FMU forgot the calibration but disk's can be bought. $50 each
dual pillar gauge for fox
70 mm cobra mass air $90
2 sets of solid motor mounts for fox.
351W swap oil pan Miloden $150
351W chrome front sump oil pan $35

Heads are as follows

ported tfs 2.02 1.6 valved 5k on it
$1000

Edelbrock 2.02 1.6 valved ported and fresh 0 on them since being freshened up.
$1000

Canfield ported 2.02 1.6 valved heads 1500 miles
$1200

Windsor jr 1.94 xxx exhaust valved unk milage
$300

fresh 0 mile gt40's
$450

All parts located in Stockton

Thats all I had a chance to look at right now.
I'm positive I have more things. [Big Grin]

[ February 21, 2008, 04:36 PM: Message edited by: Fostang ]

Posted by Cm4hawks (Member # 5231) on :

Dibs on the gt-40 tubular Upper

Posted by 69 Resto-Mod Coupe (Member # 296) on :

"I'm pretty much done with fox bodies and will only be keeping my cobra at least for a while longer."

Are you feeling okay? [dance]

Posted by tim86gt (Member # 8013) on :

im tryin get them Hotchkins kit hit me up fast

Posted by turbo50 (Member # 6700) on :

PM sent

Posted by WickedStang (Member # 7692) on :

Ported stage II lower gt40 intake 302 $250
Stock gt 40 tubular upper intake

Are u selling both for $250 or just the lower?

Posted by PurpleNotch (Member # 2902) on :

wanna just sell me the complete gutted out rolling chassis of that 90? lmk pm me thanks shaun [patriot]

Posted by BlowN67 (Member # 4229) on :

shaun, it is clean enough too, seen this car in person, [patriot]

Posted by PurpleNotch (Member # 2902) on :

yeah just looking around for a rolling chassis to keep in the garage and tinker on from time to time I have found a few but all of them where way to much.. [patriot]

Posted by BlowN67 (Member # 4229) on :

i'm not speaking for him but this car was clean when i saw it so I couldnt tell ya what he would ask for an roller. good luck though

Posted by Stealth1 (Member # 7849) on :

pm sent

Posted by svt306snake (Member # 1967) on :

quote:
Originally posted by BlowN67:
shaun, it is clean enough too, seen this car in person,

thats my old car isn't it sal

Posted by BlowN67 (Member # 4229) on :

I believe an charlie special right?

Posted by svt306snake (Member # 1967) on :

quote:
Originally posted by BlowN67:
I believe an charlie special right?

thats her then too bad should stay and sell as complete car

Posted by asskickn88 (Member # 4957) on :

I've seen the Lightning in person, its very clean for the mileage.... cleaner I think than my 110K mile truck. I wanted to buy it a couple years ago.

Posted by Trunkster (Member # 6598) on :

your pms are full fostang, interedted in the lightning i'd like to see some pics.

Posted by STANGSALLY76 (Member # 5342) on :

hey im interested in the tfs 2 cam and 351w
milodon oil-pan i can pick-up asap call me
at 916-676-3947 thanks

Posted by Fostang (Member # 3752) on :

swap pan gone....but i still have the tfs cam.....

also gone is the 351 efi intake.

thanks dan turbo 50

i will get some pics of the truck here shortly.

Posted by JBeezy53 (Member # 3960) on :

PMs are full again.

Posted by Fostang (Member # 3752) on :

k just made room in my pm box tomorrow sun will be the last day im around on a weekend so if u want anything better let me know....otherwise ill be available in 2 weeks on a weekend or a mon-tues as long as im not paged into work.

Posted by jmcclesk (Member # 1355) on :

I think is was my car first, right tron????? I thing if the heads are still the same they have been worked by gromm racing.

[ February 24, 2008, 12:19 AM: Message edited by: jmcclesk ]

Posted by turbo50 (Member # 6700) on :

Just for the record, someone will be getting a screaming deal on that Lightning. If I had that kind of extra cash around I would buy this truck. It is in great shape. I believe a steal for the money!

Sal,
Nice meeting you and thanks for showing me your stable and cutting me a good deal on the parts. Also thanks for waiting for me to run to the ATM when I seen even more parts than I had came up for. It is like a late model mustangers dream come true up there!!

Dan

Posted by jmcclesk (Member # 1355) on :

I wish i had saw the 351 intake. Dan you are too fast.

Posted by turbo50 (Member # 6700) on :

quote:
Originally posted by jmcclesk:
I wish i had saw the 351 intake. Dan you are too fast.

Hey you snooze, you lose.

It is brand new and clear coated ( I believe it is a powder coat) great shape and great price!!

I picked up the pan while I was there too so all I need now is to get some pistonies for the 351 and Im set.

Posted by jmcclesk (Member # 1355) on :

[Razz]

I never saw the intake on the list till you pointed it out. You get a big [patriot]

[ February 24, 2008, 12:57 AM: Message edited by: jmcclesk ]

Posted by Fostang (Member # 3752) on :

quote:
Originally posted by turbo50:
Just for the record, someone will be getting a screaming deal on that Lightning. If I had that kind of extra cash around I would buy this truck. It is in great shape. I believe a steal for the money!

Sal,
Nice meeting you and thanks for showing me your stable and cutting me a good deal on the parts. Also thanks for waiting for me to run to the ATM when I seen even more parts than I had came up for. It is like a late model mustangers dream come true up there!!

Dan

Thanks man pleasure doing business.

quote:
Originally posted by jmcclesk:
I think is was my car first, right tron????? I thing if the heads are still the same they have been worked by gromm racing.

Yup still has the same heads but I have not confirmed if they are worked or not.

The plans for the LX is selling it as a stock motored possibly with the tremec if I don't find a t-5. 3.55's subframes tubular K-member flowmaster cat back lowering springs and the koni reds all the way around. Probably going to start off at $5,500 as Dan suggested.

[ February 24, 2008, 01:47 AM: Message edited by: Fostang ]

Posted by jmcclesk (Member # 1355) on :

I am about 80% sure that they are o-ringed for fel-pro heads gaskets and have some bowl work and a match on the intake side.

Posted by Fostang (Member # 3752) on :

ttt

Posted by 87droptop50 (Member # 7185) on :

I'm interested in the gt40 heads

Posted by Fostang (Member # 3752) on :

quote:
Originally posted by 87droptop50:
I'm interested in the gt40 heads

Come get em then. [Big Grin]

Posted by N8 (Member # 6048) on :

Sal how much for the saleen stuff?

Posted by tim86gt (Member # 8013) on :

when could i get them control arms

Posted by Fostang (Member # 3752) on :

ttt

Posted by BlowN67 (Member # 4229) on :

Is this the beauty

Posted by GEE (Member # 2849) on :

Are the 18" Cobra wheels 4 or 5 lug?

Nice looking LX by the way!

Posted by BlowN67 (Member # 4229) on :

quote:
Originally posted by GEE:
Are the 18" Cobra wheels 4 or 5 lug?

Nice looking LX by the way!

their 5lug

Posted by 87#184saleen (Member # 6276) on :

wana sell me the t trim head unit lmk

Posted by Fostang (Member # 3752) on :

Well I appoligize guys for delaying but I haven't had a day off to get anything ready for those that are interested.

Possibly next weekend it'll be ready to roll.

If there are things without price shoot me an offer.

Posted by Fostang (Member # 3752) on :

ttt ill be home this weekend come buy stufffffff.

Posted by Fostang (Member # 3752) on :

TTT for those of you that have stopped by thanks. [patriot]

Posted by PurpleNotch (Member # 2902) on :

really wanna buy that lx hatch as a roller .....lmk..ill pick up with my trailer [patriot]

Posted by Fostang (Member # 3752) on :

quote:
Originally posted by PurpleNotch:
really wanna buy that lx hatch as a roller .....lmk..ill pick up with my trailer

If i sold it as a roller i would need to get at least 3,500 for it to worth it to me. otherwise getting it running is just a few bolt ons away.

Posted by PurpleNotch (Member # 2902) on :

Fostang hit me up on a pm man i wanna talk to you about that lx, thanks [patriot]

Posted by badazlx (Member # 4899) on :

what kind of nitrous stuff so you have? also i think i sold ya that 351 gt40 lower a while back ago. lol

Posted by Fostang (Member # 3752) on :

quote:
Originally posted by badazlx:
what kind of nitrous stuff so you have? also i think i sold ya that 351 gt40 lower a while back ago. lol

Brandon right?

Yeah the 351 lower is long gone only 302 lowers left.

I have a complete zex kit with pressure gauge and purge. dry kit

Also a nitrous works with 2 10lb for an LS1 etc but i don't see why it wouldn't work on any other efi. wet kit

Posted by badazlx (Member # 4899) on :

yup thats me! could ya pm me the price for the nitrous works,

thanks

Fueled by Ford Mustang Owners
on CaliforniaFords.com