This is topic IT ALL MUST GO!!! LOWERED PRICES!!! RACE CAR PARTS, TKO 600, WORLD BLOCK, NX NITROUS in forum FOR(D) SALE: at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=052958
Posted by vpr_klr (Member # 3353) on
:
TAKING OFFERS ON EVERYTHING!
-MEIZIERE BILLET WATER PUMP. SBF, POLISHED FINISH. 2 HOURS ON IT. $470 NEW
ASKING $400 WITH NEW PAINLESS RELAY KIT($50).
-REBUILT TRAC LOK, 28 SPLINE, WITH FRPP 3.73'S-$130 READY TO BOLT IN!
-MAC 3" PRO-CHAMBER FOR LONG TUBES(BLACK) WITH SS BAND CLAMPS AND 3 BOLT FALNGES TO HOOK UP TO MY HOOKERS. 2 HOURS RUN TIME. $ 350 NEW (FITS LAKEWOOD BELL ON A TKO AND WILL FIT AOD).
ASKING $220
-MAC 3" PRO-DUMPS, BLACK, 2 HOURS RUN TIME. $300 NEW.
ASKING $220
-TKO 600, BRAND NEW, ALL STUFF NEW UNLESS NOTED. COMES WITH CENTERFORCE CLUTCH DESIGNED FOR 850 HP, ALUMINUM DRIVESHAFT WITH SPICER 31 YOKE, CUSTOM STEEDA SHIFTER, MODDED STOCK CROSSMEMBER, LAKEWOOD BELL CUT FOR LONG TUBES(USED), EVEN COMES WITH GM SYNCHRO MESH!!! $3000+ NEW.
-LOOKING FOR $2300 OBO.
TRANS, BELL, DRIVESHAFT-ASKING $1900
-ANDERSON FORD MOTORSPORT ALUMINUM FLYWHEEL, NEW BUT HAS BEEN MOUNTED, WITH 50 AND 28 WEIGHTS. $360 NEW ASKING-$250
-ACCUFAB 90MM TB. NEVER USED. $300 NEW.
ASKING $220
-FOX BODY OIL COOLER KIT, DESIGNED FOR 700HP CARS, WITH DUAL OIL FILTER FENDER RELOCATOR. BUILT WITH RUSSELL FITTINGS AND RUSSELL NHRA "BLUE" PUSH LOCK HOSE. OVER $500 INVESTED. USED FOR 2 HOURS.
-NX DUAL BOTTLE NITROUS KIT WITH BILLET DUAL BOTTLE HOLDER, 2 10LB. BOTTLES, 2 FULL GEN X2 KITS FOR BOTH BOTTLES(BOTTLE HEATERS, PURGE KITS, BLOW DOWNS, GAUGES, PURGE, ETC.) NX BOTTLE OPENERS ALSO. WELL OVER $1900 WORTH OF SHIT. NEVER USED, BUT SOME PARTS INCLUDED ARE USED(ONE OF THE BOTTLE OPENERS IS SLIGHTLY, AND THE BILLET BRACKET.). NEW EFI NOZZLES INCLUDED WITH ALL LINES, SOLENOIDS, AND INSTRUCTIONS.
ASKING $1100
-WORLD MAN-O-WAR BLOCK 4.125 BORE CLEVELAND MAIN 8.200" BLOCK. MACHINED BORES(AT 4.125, WOULD NEED A FINISH DEPENDING ON PISTONS USED) AND LIFTER BORES FOR STOCK SIZE SBF STUFF. $2895 FROM WORLD WITH THE MACHINE WORK(DONE BY THEM BEFORE SHIPPING). PAINTED FORD BLUE BY WORLD. BRAND NEW
-CROWER CRANK FOR THE WORLD BLOCK. EVERY OPTION EXCEPT BILLET. 3.335 STROKE. 355 CU IN WITH THE 4.127 BORE PISTONS. $2300 NEW. INTERNAL BALANCE. READY TO GO. NEW
-LOOKING FOR $3600 FOR BLOCK AND CRANK.
-MSD 6BTM. USED. $300 NEW. HAS EVERYTHING.
ASKING $200
-MSD HVC 2 BLASTER COIL. USED FOR 2 HOURS. $150 NEW
ASKING $120
-ASP MANUAL BRAKE ADAPTERS(2) ONE WITH ROD, ONE WITHOUT. $50 AND $40.
-FOX BODY KONI REDS FOR REAR. MODDED FOR COIL OVER SET UP. 330 MILES AND 6 PASSES. $50
-130 AMP ALTERNATOR, BRAND NEW UNIT, FORD UNIT WITH MARCH PULLEY. $100
LOTS MORE, THIS IS ALL I CAN THINK OF RIGHT NOW. E-MAIL FOR PICS OR WILL POST SOON. VPR_KLR@YAHOO.COM THANKS, ALAN.
[ May 04, 2008, 12:21 AM: Message edited by: vpr_klr ]
Posted by BlowN67 (Member # 4229) on
:
whats the biggest head cog pulley u got?
Posted by BlowN67 (Member # 4229) on
:
whats the biggest head cog pulley u got?
Posted by vpr_klr (Member # 3353) on
:
I THINK I GOT A COUPLE OF 31'S. MAYBE A 34. I HAVE TO CHECK JOHN.
WHAT ARE YOU LOOKING FOR?
Posted by BlowN67 (Member # 4229) on
:
the biggest i can get to calm down this y-trim down alittle. i got an 73 lower
Posted by vpr_klr (Member # 3353) on
:
I'LL CHECK THIS WEEKEND. I THINK I HAVE A 70 TOOTH LOWER WITH UNDERDRIVE AS WELL.
Posted by 89Rodknocker (Member # 2951) on
:
A Allan let me know if John doesn't pic up thoes coggs. I'm in the same boat he is.
[ December 08, 2007, 02:46 PM: Message edited by: 89Rodknocker ]
Posted by machsteve (Member # 6381) on
:
how much are you askin for the whole nx setup? lmk thanks
Posted by vpr_klr (Member # 3353) on
:
quote:
Originally posted by machsteve:
how much are you askin for the whole nx setup? lmk thanks
make an offer on how much would it be worth to you. pm offer.
Posted by vpr_klr (Member # 3353) on
:
vortech and procharger cogs sold.
thanks henry!
Posted by vpr_klr (Member # 3353) on
:
ttt
Posted by SHIFTY-50 (Member # 8091) on
:
Have any cams lying around?
Posted by vpr_klr (Member # 3353) on
:
I GOT A NASCAR BUSCH SPEC SOLID ROLLER ![[Big Grin]](biggrin.gif)
Posted by vpr_klr (Member # 3353) on
:
BUY MY STUFF!
Posted by vpr_klr (Member # 3353) on
:
PENDING SALE ON PROTHANE MOUNTS, CENTERFORCE 26 SPLINE CLUTCH.
Posted by vpr_klr (Member # 3353) on
:
UPDATE.
Posted by BlowN67 (Member # 4229) on
:
price for tranny only no bell?
Posted by 8stang8 (Member # 8082) on
:
what p/n is the msd coil
Posted by vpr_klr (Member # 3353) on
:
pm me John.
pn is 8253
Posted by vpr_klr (Member # 3353) on
:
update
Posted by chikis (Member # 8157) on
:
would u sell only one kit and how much.... thank you
Posted by vpr_klr (Member # 3353) on
:
one of my nx kits?
Posted by chikis (Member # 8157) on
:
yup my bad for that so how much ...?
Posted by vpr_klr (Member # 3353) on
:
pm me...
Posted by warhorse58gt (Member # 7702) on
:
thanks again for the m/c. ![[patriot]](graemlins/patriot.gif)
Posted by vpr_klr (Member # 3353) on
:
quote:
Originally posted by warhorse58gt:
thanks again for the m/c.
my pleasure John! ![[burnout]](graemlins/burnout.gif)
Posted by vpr_klr (Member # 3353) on
:
quote:
Originally posted by warhorse58gt:
thanks again for the m/c.
my pleasure John!
Posted by 1SLOWLX (Member # 558) on
:
Heydo u got a good set of heads for sale?
Posted by vpr_klr (Member # 3353) on
:
I got a set of Trickflow R's CNC. They are new, I was keeping them but if you want them, pm me.
I also have Kook's 1 3/4 to 1 7/8 stepped headers for these heads. 302 in a fox.
SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD
[ May 04, 2008, 02:51 AM: Message edited by: vpr_klr ]
Posted by 1SLOWLX (Member # 558) on
:
pm sent
Posted by vpr_klr (Member # 3353) on
:
POST EDITED.
Posted by Cm4hawks (Member # 5231) on
:
PM SENT
Posted by vpr_klr (Member # 3353) on
:
ttt
Posted by vpr_klr (Member # 3353) on
:
bump
Posted by SHORTSHIFTER89 (Member # 7810) on
:
how much for the aluminum drive shaft
Posted by vpr_klr (Member # 3353) on
:
PM me an offer.
Posted by SHORTSHIFTER89 (Member # 7810) on
:
how much for just Aluminum drive shaft
Posted by vpr_klr (Member # 3353) on
:
PM me an offer.
Posted by vpr_klr (Member # 3353) on
:
need it all gone!!
make offers guys
Posted by vpr_klr (Member # 3353) on
:
sway bar and tach gone!
Thanks 70mach351
[ May 04, 2008, 12:22 AM: Message edited by: vpr_klr ]
Posted by Notch1320 (Member # 2647) on
:
What is the price on the Trick Flow R CNC Heads & Kooks Headers? PM me with a price.
Posted by vpr_klr (Member # 3353) on
:
man, sorry, forgot to edit the post.
those are sold.
Posted by Notch1320 (Member # 2647) on
:
Damn!!!
You interested in a trade of the Man-O War Block and Crower crank for a modded 86 SVO?
Posted by 7-Up Man (Member # 8345) on
:
What amp is the alt?
Posted by vpr_klr (Member # 3353) on
:
quote:
Originally posted by Notch1320:
Damn!!!
You interested in a trade of the Man-O War Block and Crower crank for a modded 86 SVO?
Man I just bought another mustang! I would only be interested in trading for another dirt bike!
Posted by vpr_klr (Member # 3353) on
:
quote:
Originally posted by 7-Up Man:
What amp is the alt?
it's a 130 amp
Posted by BlowN67 (Member # 4229) on
:
quote:
Originally posted by vpr_klr:
quote:
Originally posted by Notch1320:
Damn!!!
You interested in a trade of the Man-O War Block and Crower crank for a modded 86 SVO?
Man I just bought another mustang! I would only be interested in trading for another dirt bike!
2000kx250?
Posted by vpr_klr (Member # 3353) on
:
looking more along the lines of a 2002 CR250 or a 2006 CRF250R
I will entertain your offer if it's plus cash.
Fueled by Ford Mustang Owners
on CaliforniaFords.com